Fast Intentions Stage 2 TT build by MA-Motorsports.

Wuero370z · 11-30-2021, 12:15 PM

Carbon z posted his car for sale with his turbo specs listed

Sent from my iPhone using Tapatalk

Spooler · 11-30-2021, 12:26 PM

Quote:

Originally Posted by Wuero370z

Carbon z posted his car for sale with his turbo specs listed

Sent from my iPhone using Tapatalk

WOW, oh well. Guess he is giving up. Where did he post it?

Wuero370z · 11-30-2021, 12:51 PM

Quote:

Originally Posted by Spooler

WOW, oh well. Guess he is giving up. Where did he post it?

Facebook. Says he’s gunna put it on bring a trailer if someone from the Z group doesn’t want it

Sent from my iPhone using Tapatalk

Elmo370z · 11-30-2021, 01:25 PM

Quote:

Originally Posted by Wuero370z

Facebook. Says he’s gunna put it on bring a trailer if someone from the Z group doesn’t want it

Sent from my iPhone using Tapatalk

75k for a car the will still blow up. Rjm **** is crap. There closed deck blocks are 25/75 at best. VR30 crowd is finding out how bad it is.

Spooler · 11-30-2021, 01:45 PM

Quote:

Originally Posted by Elmo370z

75k for a car the will still blow up. Rjm **** is crap. There closed deck blocks are 25/75 at best. VR30 crowd is finding out how bad it is.

So RJM is making closed decks for VR30? That is quite comical if so.

Spooler · 11-30-2021, 03:47 PM

Quote:

Originally Posted by Elmo370z

75k for a car the will still blow up. Rjm **** is crap. There closed deck blocks are 25/75 at best. VR30 crowd is finding out how bad it is.

Are guys already turning them up that far to lift the heads? If so, WOW.

Mr.Squeeze · 12-01-2021, 06:42 PM

Quote:

Originally Posted by Wuero370z

Carbon z posted his car for sale with his turbo specs listed

Sent from my iPhone using Tapatalk

He's selling his car and doesn't even know what size turbos he has lol. He has it posted with twin 68mm turbos on Facebook and Instagram that's not even close to the correct size.

Sent from my SM-G986U using Tapatalk

Spooler · 11-30-2021, 12:39 PM

I will never sell mine. When I build one, I normally keep it forever.

NeverBoneStck · 12-01-2021, 06:17 PM

I actually purchased a RJM block. How is it failing??

Spooler · 12-01-2021, 06:39 PM

Quote:

Originally Posted by NeverBoneStck

I actually purchased a RJM block. How is it failing??

The RJM closed deck is just pressed in. The CSS close deck is acutally machined into the block with a 3 or 4 axis CNC. The RJM still allows the sleeves to move too much. The fix will be what SOHO does with the top fuel hoops and the CSS closed deck. Mark at Mazworx is upgrading his engine setup right now. It will be in the testing phase sometime soon.

NeverBoneStck · 12-01-2021, 06:40 PM

Quote:

Originally Posted by Spooler

The RJM closed deck is just pressed in. The CSS close deck is acutally machined into the block with a 3 or 4 axis CNC. The RJM still allows the sleeves to move too much. The fix will be what SOHO does with the top fuel hoops and the CSS closed deck. Mark at Mazworx is upgrading his engine setup right now. It will be in the testing phase sometime soon.

Well ****. Thanks for letting me know.

Spooler · 12-01-2021, 06:45 PM

Quote:

Originally Posted by NeverBoneStck

Well ****. Thanks for letting me know.

That info is buried back in my thread somewhere. I thought the Mazworx setup would hold but it didn't the way he built my engine. I am tired of being the test mule. Whatever I do next time has to be proven. SOHO is the only one to have done that for now. I am sure Mark will get it.

DrBacon · 12-01-2021, 08:52 PM

Quote:

Originally Posted by Spooler

That info is buried back in my thread somewhere. I thought the Mazworx setup would hold but it didn't the way he built my engine. I am tired of being the test mule. Whatever I do next time has to be proven. SOHO is the only one to have done that for now. I am sure Mark will get it.

When they pull your engine apart out of curiosity ask them if the head studs were loose. I've seen it happen with plenty of arp lube and torqued to 95lbs after a couple hundred miles they loosen up, no one has been able to really give me a straight up answer as to why that happens. ARP claims you don't need to retorque them after the first heat cycle, and honestly very few people probably do considering the amount of work required to do so.

Elmo370z · 12-01-2021, 07:09 PM

Quote:

Originally Posted by NeverBoneStck

I actually purchased a RJM block. How is it failing??

Don’t know why you would ever purchase anything from rjm.

NeverBoneStck · 12-01-2021, 07:34 PM

Quote:

Originally Posted by Elmo370z

Don’t know why you would ever purchase anything from rjm.

Had no clue there was issues

12-01-2021, 06:17 PM	#9 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I actually purchased a RJM block. How is it failing?? __________________ Juiced! That is all you need to know !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM

11-30-2021, 12:15 PM	#1 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6717	Carbon z posted his car for sale with his turbo specs listed Sent from my iPhone using Tapatalk

11-30-2021, 12:39 PM	#8 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,061 Drives: 2013 Nismo 370z Rep Power: 2684393	I will never sell mine. When I build one, I normally keep it forever.