|
I already told you how to plumb it I guess you "aint calling me a truther" Mine is as follows: From port 2 on the EBC to top of waste
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
12-20-2016, 03:52 PM
|
#1 (permalink) |
|
Base Member
Join Date: Nov 2014
Location: Jacksonville
Posts: 102
Drives: 2014 370z Sport M6
Rep Power: 12  |
I already told you how to plumb it
 I guess you "aint calling me a truther"Mine is as follows: From port 2 on the EBC to top of waste gates From port 3 on the EBC to driver side charge nipple boost source From driver side charge nipple boost source to bottom of waste gates I am running the 8 PSI spring and with my EBC off I get 7.8 PSI pretty consistently. With it on I have it set to around 10 PSI low and 13 PSI high.... Its currently off until I see get on a dyno for the below reasons....   
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Twin Turbo Kit- Internal wastegate rattle sound | NOBLE|370Z | Forced Induction | 12 | 03-01-2020 02:24 PM |
| GTM Stage 2 Internal Wastegate Actuators | ColdFire | Forced Induction | 6 | 12-04-2013 11:30 AM |
| Need input on oil cooler plumbing | gomer_110 | Engine & Drivetrain | 7 | 11-28-2013 12:19 AM |
| Noob here with some questions. (Wastegate, Blow off) | Gauge | Forced Induction | 30 | 10-14-2012 12:26 AM |
| HKS Internal Wastegate Actuator | G37sHKS | Forced Induction | 3 | 09-13-2011 04:16 PM |
9Likes
Hybrid Mode
