RJ MFG Supercharger kit Feeler...

lj909

Dude, you can't go FI on stock injectors. No kit does this and is not a requirement of carb. Stillen has bigger injectors and is carb.

One of the main requirements of carb is that it be a complete turn key kit with tune and everything. It all has to be included to gain carb approval.

And 2 hours to install a full FI kit? Are you kidding?

__________________
PW 07 HR350Z R.I.P. Totaled by 82yr old woman
2010 40th Anniversary 370Z

B&W_Evader

Main point is to make the start kit cheaper and not make people buy stuff twice. Like a flash from RJM and then have to go buy uprev. Same with the injectors, if you keep the maps the same, no need to flash. This is just an intermediary step to allow the kit to pass smog. Then you get your tuning SW and injectors and get your HP. Remap the injectors for smog when you need it. That way you don't buy anything twice. You also then swap between smog and HP setup with just swapping tunes. You need to make the smog kit stand-alone so you can sell it as a CARB legal setup. Maybe you could do it where you do the above and swap a pulley. A pulley is cheap enough to buy twice. To get CARB I think you have to demonstrate reduced emissions.

And it's 2 hours to swap between SMOG and HP. A tune swap is a couple of seconds, a pulley swap should be doable in 2 hours.

__________________
|RIP|6spd-sport|OSG-LSD|XP8|RBF600|Eibach Sways|RE-71R|FI-34Row|Gen3-CAI|Yaw P.S.|