Stillen SC P0101 Problem.

dboi941 · 11-16-2016, 07:29 AM

Car: 2016 370z nismo 400 miles on it.

The problem I am having is the code pops up (P0101) when I put the car in drive every time and goes into limp mode.

Its on a custom tune not Stillens.
Things I did trying to fix the problem:

Cleaned both maf sensors. = Did not help

Changed the maf from Bank a to b and b to a code was still (P0101) = doesn't look like a maf sensor problem.

No vacuum leaks.

Changed wire harness from bank a to bank b and now (P010B) so code move to bank b after wire harness from bank a to bank b. Called stillen to get new wires seems like a 100% sure shot that was the problem. = 3 new wire harness and problem it still there.

The maf is going out of range on the low side for sure we uped the high value to 12.99 and code still pops.

Any suggestions would be very great and helpful thank you.

TBatt · 11-16-2016, 10:11 AM

You should talk to Seb at Specialty Z. He did my tune and the car runs great!

dboi941 · 11-16-2016, 10:29 AM

Quote:

Originally Posted by TBatt

You should talk to Seb at Specialty Z. He did my tune and the car runs great!

Was you having the same problem?

Seb@SZ · 11-17-2016, 11:57 AM

PM sent.

TBatt · 11-17-2016, 02:17 PM

Quote:

Originally Posted by dboi941

Was you having the same problem?

No, but everyone here that has used Seb has been VERY happy with his work. Great guy and he goes out of his way to help. Money well spent.

Hotrodz · 11-17-2016, 02:41 PM

I second this motion. Sebastian has taken great care of my needs going on four years now!

Sent from my SM-N910P using Tapatalk

dboi941 · 11-18-2016, 01:23 PM

Yes I took his advice that he gave in a pm and worked out great will get dyno time today and get the numbers

thanks everyone and Seb.....

Hydra · 12-01-2017, 06:21 AM

Quote:

Originally Posted by dboi941

Yes I took his advice that he gave in a pm and worked out great will get dyno time today and get the numbers

thanks everyone and Seb.....

i have the exact same problem ... what was your problem ? air filters location ?

Hydra · 12-01-2017, 12:22 PM

Quote:

Originally Posted by Seb@SZ

PM sent.

u there SEB ?

chuckie311 · 12-01-2017, 02:11 PM

probably best to call him at the shop seeing he hasn't been on here in a few weeks

Quote:

Originally Posted by Hydra

u there SEB ?

Memphis370Z · 12-01-2017, 03:26 PM

Quote:

Originally Posted by Hydra

u there SEB ?

Quote:

Originally Posted by chuckie311

probably best to call him at the shop seeing he hasn't been on here in a few weeks

Yep, or e-mail him - sebastian@specialtyz.com.

He has always responded promptly whenever I've e-mailed him. His customer service is top notch.

Draunzer91 · 04-16-2019, 06:02 PM

What was the advice he gave you?

11-16-2016, 07:29 AM	#1 (permalink)
dboi941 Base Member Join Date: Nov 2015 Location: Bradenton, FL Age: 41 Posts: 24 Drives: 2016 370z Nismo Rep Power: 9	Stillen SC P0101 Problem. Car: 2016 370z nismo 400 miles on it. The problem I am having is the code pops up (P0101) when I put the car in drive every time and goes into limp mode. Its on a custom tune not Stillens. Things I did trying to fix the problem: Cleaned both maf sensors. = Did not help Changed the maf from Bank a to b and b to a code was still (P0101) = doesn't look like a maf sensor problem. No vacuum leaks. Changed wire harness from bank a to bank b and now (P010B) so code move to bank b after wire harness from bank a to bank b. Called stillen to get new wires seems like a 100% sure shot that was the problem. = 3 new wire harness and problem it still there. The maf is going out of range on the low side for sure we uped the high value to 12.99 and code still pops. Any suggestions would be very great and helpful thank you. Last edited by dboi941; 11-16-2016 at 07:42 AM.

11-16-2016, 10:11 AM	#2 (permalink)
TBatt Premium Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	You should talk to Seb at Specialty Z. He did my tune and the car runs great! dboi941 likes this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

11-17-2016, 11:57 AM	#4 (permalink)
Seb@SZ Enthusiast Member Join Date: Jan 2010 Location: Chatsworth Posts: 277 Drives: Zs Rep Power: 24	PM sent. EliteXpress, wideglideleon and dboi941 like this. __________________ Z Car Specialists www.specialtyz.com Blog http://specialtyz.com/blog/

11-17-2016, 02:41 PM	#6 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	I second this motion. Sebastian has taken great care of my needs going on four years now! Sent from my SM-N910P using Tapatalk ANMVQ likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

11-18-2016, 01:23 PM	#7 (permalink)
dboi941 Base Member Join Date: Nov 2015 Location: Bradenton, FL Age: 41 Posts: 24 Drives: 2016 370z Nismo Rep Power: 9	Yes I took his advice that he gave in a pm and worked out great will get dyno time today and get the numbers thanks everyone and Seb..... Hotrodz and imazman like this.

04-16-2019, 06:02 PM	#12 (permalink)
Draunzer91 Base Member Join Date: Dec 2017 Location: Boca Raton, Florida Posts: 11 Drives: 15 370z Slvr M6 Rep Power: 7	What was the advice he gave you?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
p0101 + p0106 codes ?	jaytirbhaw	Forced Induction	23	07-22-2016 09:35 AM
Stillen intake rattling problem?	azn370z	Intake/Exhaust	31	01-28-2014 08:36 PM
Stillen 3rd Gen Intake working now, but ran into another problem	blackmagic	Engine & Drivetrain	13	06-08-2010 11:01 PM
Anyone else have this problem? Stillen Intake...	Darkaeon	Intake/Exhaust	55	06-03-2010 08:37 PM
Help! Stillen H&R Spacer Problem!	marcussoori	Brakes & Suspension	31	05-21-2010 09:24 PM