Nissan 370Z Forum - View Single Post

dboi941 · 11-16-2016, 07:29 AM

Car: 2016 370z nismo 400 miles on it.

The problem I am having is the code pops up (P0101) when I put the car in drive every time and goes into limp mode.

Its on a custom tune not Stillens.
Things I did trying to fix the problem:

Cleaned both maf sensors. = Did not help

Changed the maf from Bank a to b and b to a code was still (P0101) = doesn't look like a maf sensor problem.

No vacuum leaks.

Changed wire harness from bank a to bank b and now (P010B) so code move to bank b after wire harness from bank a to bank b. Called stillen to get new wires seems like a 100% sure shot that was the problem. = 3 new wire harness and problem it still there.

The maf is going out of range on the low side for sure we uped the high value to 12.99 and code still pops.

Any suggestions would be very great and helpful thank you.

11-16-2016, 07:29 AM	#1 (permalink)
dboi941 Base Member Join Date: Nov 2015 Location: Bradenton, FL Age: 42 Posts: 24 Drives: 2016 370z Nismo Rep Power: 9	Stillen SC P0101 Problem. Car: 2016 370z nismo 400 miles on it. The problem I am having is the code pops up (P0101) when I put the car in drive every time and goes into limp mode. Its on a custom tune not Stillens. Things I did trying to fix the problem: Cleaned both maf sensors. = Did not help Changed the maf from Bank a to b and b to a code was still (P0101) = doesn't look like a maf sensor problem. No vacuum leaks. Changed wire harness from bank a to bank b and now (P010B) so code move to bank b after wire harness from bank a to bank b. Called stillen to get new wires seems like a 100% sure shot that was the problem. = 3 new wire harness and problem it still there. The maf is going out of range on the low side for sure we uped the high value to 12.99 and code still pops. Any suggestions would be very great and helpful thank you. Last edited by dboi941; 11-16-2016 at 07:42 AM.