TAKING ORDERS for winter 2017 turbo kits

solidus · 05-09-2018, 09:37 AM

Quote:

Originally Posted by Elmo370z

Anyone that has filter melting this is the man to talk to you about fixes and where to buy them.

Sasha made a new heart shield!!!

Boosted Performance · 05-09-2018, 12:41 PM

Quote:

Originally Posted by James10694

Does anyone have any tips or good photos of how they kept the wastegate vacuum lines/transmission harness away from the turbo manifold? Pretty sure everything got rearranged when I brought my car to the shop to replace the clutch. I was going to buy a fire sleeve for the vacuum lines but I don't think 500* of protection will help with direct contact on the turbo manifold.

I ran my 350Z (same kit configuration as VHR), ran all the hoses upwards from the wastegates. Never had any issues at all, as everything was a fair distance from any hot surface. Nothing was ever heat wrapped.

Quote:

Originally Posted by Elmo370z

Anyone that has filter melting this is the man to talk to you about fixes and where to buy them.

I'll have a few heat shields in stock in a couple of weeks.

James10694 · 05-11-2018, 01:02 PM

Quote:

Originally Posted by solidus

This is how I popped my motor. When I reinstalled I basically controlled the slack from where the line tees over the transmission. I have enough distance but I also used lava tube heat shielding but it does more to soothe my hurt feelings than anything. Up front from the engine bay its sleeved for about 3 ft. Sounds simple enough but following the install instructions to a tee saves some headaches. I found out 1 burned granny harness and one popped motor into the club. I like to call those "Stupid taxes". They're expensive but you won't pay twice. ( unless you're in the "Real stupid" bracket.

I was using some DEI heat sheaths for the vacuum lines. I should have wrapped or ceramic coated the turbo manifold. I even bought the heat wrap but I never got around to doing it. Big mistake.

I moved my transmission harness as far away as I could from the manifold. What kind of symtpoms were you showing before and when it failed? My brake light comes on under acceleration and a couple times my traction control light and yaw sensor light came on. Everyone seems to think it's low brake fluid but that's not the case. I think it may be the heat being generated by the turbo and it's proximity to the harness line. Did you have any of these issues when your harness failed?

solidus · 05-11-2018, 02:19 PM

Quote:

Originally Posted by James10694

I was using some DEI heat sheaths for the vacuum lines. I should have wrapped or ceramic coated the turbo manifold. I even bought the heat wrap but I never got around to doing it. Big mistake.

I moved my transmission harness as far away as I could from the manifold. What kind of symtpoms were you showing before and when it failed? My brake light comes on under acceleration and a couple times my traction control light and yaw sensor light came on. Everyone seems to think it's low brake fluid but that's not the case. I think it may be the heat being generated by the turbo and it's proximity to the harness line. Did you have any of these issues when your harness failed?

My harness was my fault. The instructions tell you to raise it up , I just did'nt raise it far enough. First a few lights came on then everything on the dash quit working and it shut down. When faced with a new harness cost I just spliced the wires.

James10694 · 05-12-2018, 07:38 PM

Guess I'll find out. Thanks for the help

James10694 · 05-16-2018, 02:14 AM

Well I guess if anyone else is having the same problem I was having... Even if you're brake fluid is between the min and Max, the brake light will come on. I went ahead and topped it off to the max line and what do ya know.. No more brake light! Learn from my stupidity

7ssain · 05-16-2018, 03:17 AM

Quote:

Originally Posted by James10694

Well I guess if anyone else is having the same problem I was having... Even if you're brake fluid is between the min and Max, the brake light will come on. I went ahead and topped it off to the max line and what do ya know.. No more brake light! Learn from my stupidity

Been there .. when u floor it the fluid in little reservoir gets all over the place from the g force and the level sensor will read low .. ur brake light will flash .. do it few times and ur abs shuts off and ur vdc wont work as well. Since then I always keep a bottle of motul 660 in the car just in case i need to top it off.

Martijn_b · 05-17-2018, 10:18 AM

Really excited about this kit, great work and very thought through.

Sent you a PM regarding availability.

hc_416 · 05-17-2018, 10:10 PM

Thanks again Sasa, I got the filter and gasket! As always great service and quick turn around.

Boosted Performance · 06-18-2018, 12:40 AM

Contact R/T tuning for complete in house BP kit packages:

https://www.rttuning.com/boosted-per...r-nissan-370z/

MoulaZ · 06-20-2018, 04:29 AM

Installing the kit now. Just ran into the Coupler issue for discharge pipes from IC. I'll have to source some 3 to 2.5" tomorrow locally myself. Not worth shipping international for 2 Couplers.

Oddly enough, there is zero mention of any of the discharge pipe work from IC to TB in the manual either.

ase9 · 06-20-2018, 08:05 AM

So my car is the one Sasa posted a link to. Very happy with it and work RT did. Its on 10lbs, ark grip exhaust, and unfortunately had to get high flow cats fabricated due to NJ emissions. I am having an issue with the trans harness though. One burnt already and I think the new one may have as well ( not my fault ).

jwick · 06-20-2018, 08:33 AM

Quote:

Originally Posted by ase9

So my car is the one Sasa posted a link to. Very happy with it and work RT did. Its on 10lbs, ark grip exhaust, and unfortunately had to get high flow cats fabricated due to NJ emissions. I am having an issue with the trans harness though. One burnt already and I think the new one may have as well ( not my fault ).

Heat wrap it. Use the heat sleeve Madwi posted.

Boosted Performance · 06-20-2018, 01:21 PM

Quote:

Originally Posted by MoulaZ

Installing the kit now. Just ran into the Coupler issue for discharge pipes from IC. I'll have to source some 3 to 2.5" tomorrow locally myself. Not worth shipping international for 2 Couplers.

Oddly enough, there is zero mention of any of the discharge pipe work from IC to TB in the manual either.

Sorry for the inconvenience. I'll be more than happy to cover the cost of replacement couplers.

Quote:

Originally Posted by ase9

So my car is the one Sasa posted a link to. Very happy with it and work RT did. Its on 10lbs, ark grip exhaust, and unfortunately had to get high flow cats fabricated due to NJ emissions. I am having an issue with the trans harness though. One burnt already and I think the new one may have as well ( not my fault ).

The harness needs to be tucked upwards. It is very easy to do, the manual covers it well, and hardware is included.

BboyZ · 06-20-2018, 08:29 PM

Quote:

Originally Posted by Boosted Performance

Contact R/T tuning for complete in house BP kit packages:

https://www.rttuning.com/boosted-per...r-nissan-370z/

5 days and its ready. hmmm.

05-12-2018, 07:38 PM	#575 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 918 Drives: 2010 370z Nismo Rep Power: 13	Guess I'll find out. Thanks for the help __________________ Boosted Performance Single Turbo 618whp/489 tq

05-16-2018, 02:14 AM	#576 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 918 Drives: 2010 370z Nismo Rep Power: 13	Well I guess if anyone else is having the same problem I was having... Even if you're brake fluid is between the min and Max, the brake light will come on. I went ahead and topped it off to the max line and what do ya know.. No more brake light! Learn from my stupidity __________________ Boosted Performance Single Turbo 618whp/489 tq

05-17-2018, 10:18 AM	#578 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Really excited about this kit, great work and very thought through. Sent you a PM regarding availability. __________________ Instagram: Boosted_Fairlady

06-18-2018, 12:40 AM	#580 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3383	Contact R/T tuning for complete in house BP kit packages: https://www.rttuning.com/boosted-per...r-nissan-370z/ jwick, scratchdvinyl, 7ssain and 5 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GReddy 20G 'Tuner' Twin Turbo Kit \| 450+rwhp @ .4Bar \| Now Taking Orders \| FREE S&H!	AJ@ECSMotorsports	Drivetrain/Engine	57	04-09-2013 10:52 AM
Jp vizage 370z polyurathane lip kit. Taking pre orders	LOU@AMPLIFIED	Body Interior/Exterior	22	09-09-2011 01:41 AM
Taking orders for LED/Angel Eyes Headlights.	Tee's Z	Exterior & Interior	17	08-01-2010 10:46 AM
Forged Distributing Taking Orders	Forged DST	Wheels & Tires	51	10-23-2009 08:37 PM
Dealers Not taking anymore custom orders	YamahaR6	Canada	18	05-20-2009 09:31 PM

05-17-2018, 10:10 PM	#579 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 12	Thanks again Sasa, I got the filter and gasket! As always great service and quick turn around.

06-20-2018, 04:29 AM	#581 (permalink)
MoulaZ Base Member Join Date: Jun 2013 Location: Sydney, Australia Posts: 230 Drives: '09 Z34 BP Turbo V2 Rep Power: 26	Installing the kit now. Just ran into the Coupler issue for discharge pipes from IC. I'll have to source some 3 to 2.5" tomorrow locally myself. Not worth shipping international for 2 Couplers. Oddly enough, there is zero mention of any of the discharge pipe work from IC to TB in the manual either.

06-20-2018, 08:05 AM	#582 (permalink)
ase9 Base Member Join Date: Sep 2017 Location: Hamilton, NJ Posts: 3 Drives: 2011 Silver 370z 6MT Rep Power: 8	So my car is the one Sasa posted a link to. Very happy with it and work RT did. Its on 10lbs, ark grip exhaust, and unfortunately had to get high flow cats fabricated due to NJ emissions. I am having an issue with the trans harness though. One burnt already and I think the new one may have as well ( not my fault ).