TAKING ORDERS for winter 2017 turbo kits

solidus · 02-06-2018, 09:28 AM

Quote:

Originally Posted by MoulaZ

Thank you very much then. Your photos were what finally made me pull the trigger, and yeah mate whatever other photos you got of the area that give an idea of filter clearance would be appreciated!

Sent from my LG-H930 using Tapatalk

Good luck MoulaZ! That filter is gonna be a bitch. The thing about it that lets it fit even in our space is the 20 degree angle. It runs into things if it's not angled in the up position. I'm stoked to see what solution you come up with. It's been bothering me so much lately that I've considered the what if's of the HKS mushroom and even filter screens. I think the HKS would sit too close to the turbo and be subject to heat and the filter screen....well it's a screen. I tried a K&N compact 4" but the lower angle still stuck too far and was obstructed. The only other option I can see is fabbing some type of flat box element that would house a good flat filter shaped like a dryer vent.( that's because I don't see 4" aluminum piping fitting to the fenderwell or snaking to the front of the car.) Those were just some of my brainstorms. Keep us posted when you start the build thread.

Sent from my SAMSUNG-SM-G890A using Tapatalk

NeverBoneStck · 02-06-2018, 11:43 AM

Quote:

Originally Posted by solidus

Good luck MoulaZ! That filter is gonna be a bitch. The thing about it that lets it fit even in our space is the 20 degree angle. It runs into things if it's not angled in the up position. I'm stoked to see what solution you come up with. It's been bothering me so much lately that I've considered the what if's of the HKS mushroom and even filter screens. I think the HKS would sit too close to the turbo and be subject to heat and the filter screen....well it's a screen. I tried a K&N compact 4" but the lower angle still stuck too far and was obstructed. The only other option I can see is fabbing some type of flat box element that would house a good flat filter shaped like a dryer vent.( that's because I don't see 4" aluminum piping fitting to the fenderwell or snaking to the front of the car.) Those were just some of my brainstorms. Keep us posted when you start the build thread.

Sent from my SAMSUNG-SM-G890A using Tapatalk

I agree. Need to find a better solution for the filter. I’m thinking about trying the hks mushroom of death as well. Just need something with better clearance

JonellZ34_ · 02-03-2018, 07:34 PM

Hello fam ..with the BP for the 370z nismo what clutch and flywheels ya recommend ? I'll appreciate the help.

Sent from my iPhone using Tapatalk

7ssain · 02-04-2018, 09:08 AM

Better contact Joe@Zspeed he helped me out to find the right clutch for my needs. i went with stage 3 Southbend full face ceramic clutch and lightweight flywheel. i love it .. pedal effort almost like stock and the grab is amazing! cant wait to try it when i install my kit!

Quote:

Originally Posted by JonellZ34_

Hello fam ..with the BP for the 370z nismo what clutch and flywheels ya recommend ? I'll appreciate the help.

Sent from my iPhone using Tapatalk

MoulaZ · 02-09-2018, 01:49 PM

**** just got real... still getting over the shock it arrived on Thursday after being shipped out on Tuesday from the US, lol.

I won't be back home till next Monday night or Tuesday but man I can't wait to tear into those boxes!

Sent from my LG-H930 using Tapatalk

Jayhovah · 02-09-2018, 02:31 PM

Quote:

Originally Posted by MoulaZ

**** just got real... still getting over the shock it arrived on Thursday after being shipped out on Tuesday from the US, lol.

So where's the build thread already!

YzGyz · 02-09-2018, 06:21 PM

Quote:

Originally Posted by MoulaZ

**** just got real... still getting over the shock it arrived on Thursday after being shipped out on Tuesday from the US, lol.

I won't be back home till next Monday night or Tuesday but man I can't wait to tear into those boxes!

Sent from my LG-H930 using Tapatalk

Ahh, so you want to be cool like me. I totally understand.

YzGyz

MoulaZ · 02-12-2018, 05:32 AM

Quote:

Originally Posted by solidus

Good luck MoulaZ! That filter is gonna be a bitch. The thing about it that lets it fit even in our space is the 20 degree angle. It runs into things if it's not angled in the up position. I'm stoked to see what solution you come up with. It's been bothering me so much lately that I've considered the what if's of the HKS mushroom and even filter screens. I think the HKS would sit too close to the turbo and be subject to heat and the filter screen....well it's a screen. I tried a K&N compact 4" but the lower angle still stuck too far and was obstructed. The only other option I can see is fabbing some type of flat box element that would house a good flat filter shaped like a dryer vent.( that's because I don't see 4" aluminum piping fitting to the fenderwell or snaking to the front of the car.) Those were just some of my brainstorms. Keep us posted when you start the build thread.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Till I mount it up, it's still a massive mystery to me. I wish I had some photos of the Turbo mounted all up, without a filter, in the car, showing the whole space infront of the Turbo.

Quote:

Originally Posted by Jayhovah

So where's the build thread already!

Haha, did one already many years back for the Z32. Had way more time, and no wife back then. Don't think I'll have time for a proper one again.

Quote:

Originally Posted by YzGyz

Ahh, so you want to be cool like me. I totally understand.

YzGyz

I just want that induction sound! If this means like you, then yes, yes I do.

solidus · 02-12-2018, 05:52 AM

Quote:

Originally Posted by MoulaZ

Till I mount it up, it's still a massive mystery to me. I wish I had some photos of the Turbo mounted all up, without a filter, in the car, showing the whole space infront of the Turbo.

Haha, did one already many years back for the Z32. Had way more time, and no wife back then. Don't think I'll have time for a proper one again.

I just want that induction sound! If this means like you, then yes, yes I do.

I wish I had read this earlier this weekend. I put on a new turbo and could've taken the pic while clocking. That bastard is on there now. For reference it's a couple ticks better than installing headers and then seeing the gasket on the bench while getting the torque wrench.

Sent from my SAMSUNG-SM-G890A using Tapatalk

JonellZ34_ · 02-12-2018, 08:46 AM

Any here using AAM midpipes and short tail exhaust 2.5' ?

Sent from my iPhone using Tapatalk

solidus · 02-12-2018, 09:16 AM

Quote:

Originally Posted by JonellZ34_

Any here using AAM midpipes and short tail exhaust 2.5' ?

Sent from my iPhone using Tapatalk

Do yourself a favor and just go with a 3" from the get go.

Sent from my SAMSUNG-SM-G890A using Tapatalk

jwick · 02-12-2018, 04:03 PM

Quote:

Originally Posted by solidus

Do yourself a favor and just go with a 3" from the get go.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Unless you plan for big power, paying for 3” is not required.

JonellZ34_ · 02-12-2018, 07:41 PM

Getting a tomei would be the best option then ?

Sent from my iPhone using Tapatalk

jwick · 02-12-2018, 08:03 PM

I think FI makes the best exhausts

Boosted Performance · 02-27-2018, 05:24 PM

So, I picked up my own 2018 370Z NISMO about a month ago...

And now the goodies that are essential for a happy ending:

I will probably get a build thread going soon. There are a lot of parts inbound.

02-12-2018, 08:03 PM	#14 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	I think FI makes the best exhausts __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

02-27-2018, 05:24 PM	#15 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3383	So, I picked up my own 2018 370Z NISMO about a month ago... And now the goodies that are essential for a happy ending: I will probably get a build thread going soon. There are a lot of parts inbound. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GReddy 20G 'Tuner' Twin Turbo Kit \| 450+rwhp @ .4Bar \| Now Taking Orders \| FREE S&H!	AJ@ECSMotorsports	Drivetrain/Engine	57	04-09-2013 10:52 AM
Jp vizage 370z polyurathane lip kit. Taking pre orders	LOU@AMPLIFIED	Body Interior/Exterior	22	09-09-2011 01:41 AM
Taking orders for LED/Angel Eyes Headlights.	Tee's Z	Exterior & Interior	17	08-01-2010 10:46 AM
Forged Distributing Taking Orders	Forged DST	Wheels & Tires	51	10-23-2009 08:37 PM
Dealers Not taking anymore custom orders	YamahaR6	Canada	18	05-20-2009 09:31 PM

02-03-2018, 07:34 PM	#3 (permalink)
JonellZ34_ Base Member Join Date: Aug 2017 Location: New jersey Posts: 9 Drives: 13-Nissan370z-sil-m6 Rep Power: 8	Hello fam ..with the BP for the 370z nismo what clutch and flywheels ya recommend ? I'll appreciate the help. Sent from my iPhone using Tapatalk

02-09-2018, 01:49 PM	#5 (permalink)
MoulaZ Base Member Join Date: Jun 2013 Location: Sydney, Australia Posts: 230 Drives: '09 Z34 BP Turbo V2 Rep Power: 26	**** just got real... still getting over the shock it arrived on Thursday after being shipped out on Tuesday from the US, lol. I won't be back home till next Monday night or Tuesday but man I can't wait to tear into those boxes! Sent from my LG-H930 using Tapatalk

02-12-2018, 08:46 AM	#10 (permalink)
JonellZ34_ Base Member Join Date: Aug 2017 Location: New jersey Posts: 9 Drives: 13-Nissan370z-sil-m6 Rep Power: 8	Any here using AAM midpipes and short tail exhaust 2.5' ? Sent from my iPhone using Tapatalk

02-12-2018, 07:41 PM	#13 (permalink)
JonellZ34_ Base Member Join Date: Aug 2017 Location: New jersey Posts: 9 Drives: 13-Nissan370z-sil-m6 Rep Power: 8	Getting a tomei would be the best option then ? Sent from my iPhone using Tapatalk