Mounting Oil Cooler Behind IC vs. Wheel Well

AntiVenom · 05-04-2016, 08:27 AM

Wanted to follow-up here.

I mounted the oil cooler behind the intercooler There is about 7-8mm clearance to the radiator and about 3mm to the intercooler. It's snug but it works.

theDreamer · 05-04-2016, 12:17 PM

That is tight!!

Jinxx · 11-22-2018, 07:56 PM

I have mine mounted behind the inter cooler with my boosted performance and with my gtm supercharger kit it was mounted in the wheel well no vents ...comparing the two boosted performance location with 30 row cooler was running ~220 daily driving and when driving hard it might creep up to 225-230 ish ...and with the supercharger kit I was using a 25 row cooler and it was about 10 degrees less in both circumstances with wheel well location ...that was in 100 degree or better South Carolina summer

One thing I have noticed is in stopped traffic the cooler located behind the inter cooler ...coolant temps would increase taking the temp gauge to 60-65% it would drop as soon as I started moving getting air flowing again .....I didn’t like that and I’m in the process of relocating to the wheel well with some non-fanned vents

jwick · 11-22-2018, 09:55 PM

Quote:

Originally Posted by Jinxx

I have mine mounted behind the inter cooler with my boosted performance and with my gtm supercharger kit it was mounted in the wheel well no vents ...comparing the two boosted performance location with 30 row cooler was running ~220 daily driving and when driving hard it might creep up to 225-230 ish ...and with the supercharger kit I was using a 25 row cooler and it was about 10 degrees less in both circumstances with wheel well location ...that was in 100 degree or better South Carolina summer

One thing I have noticed is in stopped traffic the cooler located behind the inter cooler ...coolant temps would increase taking the temp gauge to 60-65% it would drop as soon as I started moving getting air flowing again .....I didn’t like that and I’m in the process of relocating to the wheel well with some non-fanned vents

Is your BP kit the Comp Turbo?

Jinxx · 11-23-2018, 05:04 AM

Quote:

Originally Posted by jwick

Is your BP kit the Comp Turbo?

Yes

jwick · 11-23-2018, 10:26 AM

Quote:

Originally Posted by Jinxx

Yes

I was curious if you have oil cooling the turbo.

turtle64b · 11-23-2018, 11:12 AM

My coolers setup between radiator and IC. Middle pictures are clearances looking from either side. Daily driven in South Carolina summer (not as hot as some, I know) with zero issues.

Lower left: Power Steering
Upper left: Transmission
Right: Oil

Jinxx · 11-23-2018, 12:55 PM

Quote:

Originally Posted by jwick

I was curious if you have oil cooling the turbo.

No it’s the comp oil less turbo

Jinxx · 11-23-2018, 01:02 PM

Quote:

Originally Posted by turtle64b

My coolers setup between radiator and IC. Middle pictures are clearances looking from either side. Daily driven in South Carolina summer (not as hot as some, I know) with zero issues.

Lower left: Power Steering
Upper left: Transmission
Right: Oil

The boosted performance intercooler is much wider ...I wouldn’t say I was having a issue ..just noticed the increase in coolant temp when stopped on a hot day ....but relocating it shouldn’t do anything but increase airflow and maximize the coolers ..the 2015 and up in’s one bumpers have a lower vent that guides air straight to the wheel well

05-04-2016, 08:27 AM	#16 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 11	Wanted to follow-up here. I mounted the oil cooler behind the intercooler There is about 7-8mm clearance to the radiator and about 3mm to the intercooler. It's snug but it works. bullitt5897 likes this. __________________ The GREY GHOST Chronicle instagram: jdmunilla

05-04-2016, 12:17 PM	#17 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	That is tight!! __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OCTOBER ALIGNMENT & WHEEL MOUNTING SPECIAL! 10/1 to 10/31	Doug@PTUNING	Mid-Atlantic Region	12	10-28-2012 02:00 AM
Oil cooler mounting question =o)	CC_370z	Nissan 370Z General Discussions	6	02-10-2012 08:50 PM
SOLD: GTM Differential Cooler / Mounting Shroud / Temp Controller	Equinox	Parts for sale (Private Classifieds)	9	01-04-2012 07:49 PM
Sideways oil cooler mounting?	gozfast	Nissan 370Z General Discussions	3	12-01-2010 11:16 AM
Problem mounting wheel?	resdm50	Wheels & Tires	8	01-27-2010 06:19 PM

11-22-2018, 07:56 PM	#18 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	I have mine mounted behind the inter cooler with my boosted performance and with my gtm supercharger kit it was mounted in the wheel well no vents ...comparing the two boosted performance location with 30 row cooler was running ~220 daily driving and when driving hard it might creep up to 225-230 ish ...and with the supercharger kit I was using a 25 row cooler and it was about 10 degrees less in both circumstances with wheel well location ...that was in 100 degree or better South Carolina summer One thing I have noticed is in stopped traffic the cooler located behind the inter cooler ...coolant temps would increase taking the temp gauge to 60-65% it would drop as soon as I started moving getting air flowing again .....I didn’t like that and I’m in the process of relocating to the wheel well with some non-fanned vents