cLKIO's Build -700HP on PUMP GAS!

xnick101 · 09-08-2016, 03:08 PM

Very nice my friend! Awesome transformation! But did I miss something? Was the car painted black after the built engine went in?

clkio · 09-08-2016, 03:17 PM

Quote:

Originally Posted by xnick101

Very nice my friend! Awesome transformation! But did I miss something? Was the car painted black after the built engine went in?

yes the car was silver originally then I wrapped it black. Silver and carbon fiber didn't look too good.

Sent from my Nexus 6P using Tapatalk

clkio · 04-24-2017, 10:36 AM

Life been busy guys and I have not had a chance to update This. In Feb 2017, I decided to build the Diff and add few suspension components (SPL endlinks and lockout kit). I also wanted to raise the car a little because the bodykit sits low making it very hard to drive everyday in the summer so I also installed the OEM nismo suspension as well. Here are some pics

Also one issue I had with the Z last summer were the brakes, I was changing rotors 3-4 times a season because they keep getting warped and that's only from SPIRITED DRIVING! So after some research, I pulled the trigger on the AP racing RADI-CALS from stillen which will be installed next week, here are some pics:

Lastly I decided to do some work to the interior of the Z so I ended up getting seats and a new steering wheel.

I will be tracking her this summer to see how she does. Next winter, I will be looking into custom coilover setup

B&W_Evader · 04-24-2017, 11:32 AM

After having done it a couple of times... How fast can you drop your motor?

clkio · 04-24-2017, 12:07 PM

I always take my time and there is no room in engine bay to do any work but I would say 2 days (about 20 hours) I can have it out with a help of one of my friends.

V1H · 04-24-2017, 02:32 PM

Absolutdly stunning and gargantuan those brakes! Price tag?
Beautiful steering wheel. Isit a re-trimmed OEM wheel? Who sculptured it?

Sent from my iPhone using Tapatalk

clkio · 04-25-2017, 05:47 AM

Quote:

Originally Posted by V1H

Absolutdly stunning and gargantuan those brakes! Price tag?
Beautiful steering wheel. Isit a re-trimmed OEM wheel? Who sculptured it?

Sent from my iPhone using Tapatalk

Thanks Pal. Brakes were $6200 and were ordered straight from Stillen. The steering wheel was done by Carbonfiberelement (tony) here is the facebook link

https://www.facebook.com/carbonfiberelement/

He does great work and the steering wheel quality is top notch, the cost was around $850.00

V1H · 04-25-2017, 06:36 AM

Thx for the infos. You must have deep pockets. Envy you

Sent from my iPhone using Tapatalk

clkio · 04-25-2017, 07:39 AM

Quote:

Originally Posted by V1H

Thx for the infos. You must have deep pockets. Envy you

Sent from my iPhone using Tapatalk

lol I wish dude. I worked a part time job for 3 years to pay for this car and once I saved up the funds for the project I literally quit as I was working 70 hours a week and didn't have much of a life.

B&W_Evader · 04-25-2017, 05:27 PM

Quote:

Originally Posted by clkio

I always take my time and there is no room in engine bay to do any work but I would say 2 days (about 20 hours) I can have it out with a help of one of my friends.

Dang, I thought it might be faster than that. Are you pulling it out the front or dropping it out the bottom still attached to the subframe?

LateShow24 · 04-25-2017, 08:26 PM

Impressive

clkio · 04-26-2017, 06:11 AM

Quote:

Originally Posted by B&W_Evader

Dang, I thought it might be faster than that. Are you pulling it out the front or dropping it out the bottom still attached to the subframe?

Right out the front, gives me more room and makes it easier on me as my engine lift is not the greatest.

Infidel · 04-26-2017, 06:41 PM

Quote:

Originally Posted by clkio

lol I wish dude. I worked a part time job for 3 years to pay for this car and once I saved up the funds for the project I literally quit as I was working 70 hours a week and didn't have much of a life.

I'm sure the savings from having to buy a box spring for your mattress or any furnature in your bedroom helped with the purchase price of all the goodies

clkio · 04-27-2017, 05:31 AM

Quote:

Originally Posted by Infidel

I'm sure the savings from having to buy a box spring for your mattress or any furnature in your bedroom helped with the purchase price of all the goodies

I am man enough to admit it! LOL

09-08-2016, 03:08 PM	#31 (permalink)
xnick101 Base Member Join Date: Aug 2014 Location: Florida Posts: 109 Drives: 2008 6MT G37 Rep Power: 11	Very nice my friend! Awesome transformation! But did I miss something? Was the car painted black after the built engine went in? __________________ \|Boosted Performance Turbo G37 Coupe\|

04-24-2017, 10:36 AM	#33 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 12	Life been busy guys and I have not had a chance to update This. In Feb 2017, I decided to build the Diff and add few suspension components (SPL endlinks and lockout kit). I also wanted to raise the car a little because the bodykit sits low making it very hard to drive everyday in the summer so I also installed the OEM nismo suspension as well. Here are some pics Also one issue I had with the Z last summer were the brakes, I was changing rotors 3-4 times a season because they keep getting warped and that's only from SPIRITED DRIVING! So after some research, I pulled the trigger on the AP racing RADI-CALS from stillen which will be installed next week, here are some pics: Lastly I decided to do some work to the interior of the Z so I ended up getting seats and a new steering wheel. I will be tracking her this summer to see how she does. Next winter, I will be looking into custom coilover setup jaytirbhaw, GaleForce, YzGyz and 1 others like this.

04-24-2017, 11:32 AM	#34 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	After having done it a couple of times... How fast can you drop your motor? __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

04-24-2017, 12:07 PM	#35 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 12	I always take my time and there is no room in engine bay to do any work but I would say 2 days (about 20 hours) I can have it out with a help of one of my friends. B&W_Evader likes this.

04-24-2017, 02:32 PM	#36 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	Absolutdly stunning and gargantuan those brakes! Price tag? Beautiful steering wheel. Isit a re-trimmed OEM wheel? Who sculptured it? Sent from my iPhone using Tapatalk __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

04-25-2017, 06:36 AM	#38 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	Thx for the infos. You must have deep pockets. Envy you Sent from my iPhone using Tapatalk __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

04-25-2017, 08:26 PM	#41 (permalink)
LateShow24 Base Member Join Date: Mar 2016 Location: City of angeles Posts: 92 Drives: Drives Rep Power: 10	Impressive

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Build and Install Fuel Pump Relay and Harness	m3chhawk	DIY Section (Do-It-Yourself)	14	10-03-2016 05:13 PM
FS: GTM 700hp stage 2 TT in ONTARIO	clkio	Canada	0	07-18-2015 08:44 AM
Stillen 700hp kit	TopgunZ	Forced Induction	12	06-23-2015 08:34 PM
[FOR SALE] Walbro 255 Lph Fuel Pump (PUMP ONLY)	Nism0	Parts for sale (Private Classifieds)	8	08-18-2013 03:23 PM
GTM Performance Engineering: VQ37VHR Engine Build 700HP Power Package	SAM@GTM	Forced Induction	73	10-12-2012 09:46 AM