Topgunz - air to air upgrade

DUSHER · 11-12-2019, 11:48 AM

I work at a dealership so I tried using an aerosol silicon lubricant. The rear throttle body connects up fine its the front one that is being a pain in the ***. Its almost as if the pipe needs to be dropped down further but to do that ill need to start cutting in to the metal.

cgr406 · 11-12-2019, 12:16 PM

Mine was def a PITA to get installed. But after ample cussing & lots of Windex & lots of wiggling of the Y pipe, I was able to get it to fit. You certainly shouldn't need to cut anything.

11-12-2019, 12:16 PM	#2 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3368	Mine was def a PITA to get installed. But after ample cussing & lots of Windex & lots of wiggling of the Y pipe, I was able to get it to fit. You certainly shouldn't need to cut anything. __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM

11-12-2019, 11:48 AM	#1 (permalink)
DUSHER Base Member Join Date: Oct 2017 Location: Colorado Posts: 130 Drives: stillen 370z Rep Power: 9	I work at a dealership so I tried using an aerosol silicon lubricant. The rear throttle body connects up fine its the front one that is being a pain in the ***. Its almost as if the pipe needs to be dropped down further but to do that ill need to start cutting in to the metal.