Well I just picked up a 54mm idler pulley. Now I just need to figure out a belt. Pulley looks like it will be perfect. Seb wants to wait till I get the Tial hooked up before continuing with tuning. Right now he has the a/f around the 11's but it gets down to 10.5 around 6500 rpms.

Sent from my SM-N920V using Tapatalk

Hey guys I ordered the TIAL, got it yesterday.

Bought the pipe Topz recommended.

The clamp and the flange are way to small for the pipe.

do you have part #'s, so I can get the right clamp and TIAL flange.

also, anyone looking for a V3 to frankenstien I found this :

http://www.ebay.com/itm/301978243253 good deal, needs seals.

I got the small clamp too that is the one for that model. You have to get the 50mm clamp .

Sent from my SM-N920V using Tapatalk

Yeah the pipe has a 50mm flange, so you need the tial 50mm flange and a 50mm clamp.

Got the Tial installed today! You all weren't joking, this thing does sound like a jet.

http://uploads.tapatalk-cdn.com/2016...058220298a.jpg

http://uploads.tapatalk-cdn.com/2016...b798ced01c.jpg

Sent from my SM-N920V using Tapatalk

Does anyone know if the tial in the pic would fit in place of the turbosmart bov that is used in the gtm kits ... And if it would be any better .. My turbosmart has a tendency to stick often and was looking for a replacement that wouldn't stick

Install is going well, just slow. Hey, I'm old, what's your excuse?

Well is was going good until I ran into a bad Y-pipe. Top and I are working through it.

Before you cause some major damage!

Your BPV is installed the wrong way, you inlet plunger in on your outlet side. atleast I think it is?

Fix that ASAP!

According to Tial that's the way it's supposed to be.

Sent from my SM-N920V using Tapatalk

Nope. Thats all good. It is a reverse design.

hahah wow good thing I didn't install it the other way. sorry guys lol

I'm looking to quiet down the BOV with a muffler. Found these at McMaster-Carr. I'll let you know how well it works. At least it is a cheap experiment.

McMaster-Carr

I have the 1 inch version style A. I'm planning on turning down the threads on my lathe except for the very end so a clamp can hold it on.

That's a good idea. let me know what u figure out

Come on.. You guys don't want to frighten women, children and squirrels as you drive by?

It is hard to get into a street race against most cars that know not to Fudge with a boosted 370 though.

After I blew the top off of my filter that I had on the Tial, I have just left it off. So loud but I have pretty much got use to it now. lol