BP turbo build/advice

hc_416

Hey guys,

Was back at it again. After i got the pump off i took the bottom plate off to see what happened. I see no shear pin? in one of the gears; and if im correct that is what attach's the gears to the pump!! is there anyway to just get the pump rebuilt? it seems if you replace the shear pin it should work. Any ideas or info?

https://imgur.com/a/mlcCwbi

Boosted Performance

There are no shear pins, there is a key to hold the gear on to the shaft as it rotates. It is not possible for the key to come out with the cover on, and the gear in place. It is not a large key, so it just slides down the square hole on the right gear. You can pull that gear out to inspect it.

Those gears look mint.

Did you pull the gears out at all? If the motor is running there is absolutely no reason for a rebuild. I have never seen one of these fail.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

hc_416

I agree but the key is not there; not really sure what happened. I only checked out the pump with the bottom on so I am going to try today to check it out with the bottom off and see if the motor works. should the gears be rubbing on the back plate?