BP turbo build/advice

solidus · 11-09-2018, 04:12 PM

Quote:

Originally Posted by hc_416

So I took off the down pipe... Filled with oil. I look at the lower input on the intercooler and it has oil dripping from each joint. The turbo looks full of oil but it does spin, no shaft playSo what do you guys think should be the next step? Here arebsone pics for reference.

Same exact thing that I just went through. Turn on accesory power and see if the exapump is running. Mine had the wires jacked up during install or uninstall of the engine. Also afterwards oil was in the exhaust to the point that I had to dunk it in gas because trying to burn it out by driving was like a smoke generator on a tank.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 07:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 09:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 12:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 08:24 AM