BP V 2.0 turbo kits...ROUND 3 place your order now

jwick

I wouldn't run it that way. Take your EBC source pressure and take it from the manifold or Tee the charge pipe again. If you controller is controlling maximum boost from the compressor cover itself you will never see that boost at the manifold.

I'd also run an independent line for the BOV and tap the manifold again for the Greddy/AEM.

Also for any lines requiring different size vacuum line, I'd tap for that size specifically.

For example my boost gauge and the controller for my EBC are 4mm but the rest of the system is 6mm. So I tapped the manifold for both.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build