06-02-2016, 05:50 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Jun 2013
Location: Houston
Posts: 1,449
Drives: 2010 Nismo
Rep Power: 64
|
Quote:
Originally Posted by instroke
Bottom 3 ports should have 1 hooked to vacuum line - and 2 should be plugged - top ports helps control closing the wastegate 1 should be plugged and other to Boost controller.
If you are missing a plug from bottom - this is why you would be overboosting - if missing plug from top ports
you probally won't be able to boost over spring pressure.
Jwick/Sasha - feel free to correct me if I am wrong.
|
I'm talking about the port that is on the side reading MVS above it. What do we do with this port? The port on the top by "Tial" in currently open to air for spring pressure but will be hooked to the EBC Soleniod after I figure out the overboost problem. 2 of the bottom ports are plugged as shown in the picture I posted before. The third of the bottom is also hooked to the EBC Solenoid.
YzGyz
|
|
|
Similar Threads
420Likes
Threaded Mode
