BP V 2.0 turbo kits...ROUND 3 place your order now

Sean1125R · 04-05-2016, 09:38 AM

Is there a DIY page for the BP V 2.0 Turbo kits. Just curious is all.

1cleanZ · 04-05-2016, 09:44 AM

Quote:

Originally Posted by Sean1125R

Is there a DIY page for the BP V 2.0 Turbo kits. Just curious is all.

There's a public posted "installation manual" made by the manufacturer himself

Doesn't get much better then that sir!

PongSanity · 04-05-2016, 09:49 AM

Quote:

Originally Posted by Sean1125R

Is there a DIY page for the BP V 2.0 Turbo kits. Just curious is all.

Nissan 370z V2

Boosted Performance · 04-05-2016, 09:54 AM

For whatever reason, the FMIC manufacturer has some slight inconsistencies with the mounting hole locations. The jigs I use for these brackets make all the brackets 100% the same.

Sorry for the inconvenience that this may be causing. The brackets are 304 stainless, so they are not easy to drill, so if possible, try to elongate the FMIC mounting holes instead as it is a much softer material.

TheWeez · 04-05-2016, 10:36 AM

Ok I'll try that thanks. As for the fuel rails, they just needed a good tug.

Sent from my iPhone using Tapatalk

TheWeez · 04-05-2016, 07:39 PM

Haha well looks like day one is over. Oil cooler/pan/lines done except for the sensor (couldn't get that bugger off) injectors installed, turbo manifold bolted on, intake manifold tapped, and pump harness wired up.
I tried to change the spark plugs but no one had the right socket. Thank god for the gf to take me to work

Sent from my iPhone using Tapatalk

TcRocket · 04-06-2016, 01:43 PM

[QUOTE=TheWeez;3452155]Haha well looks like day one is over. Oil cooler/pan/lines done except for the sensor (couldn't get that bugger off) injectors installed, turbo manifold bolted on, intake manifold tapped, and pump harness wired up.
I tried to change the spark plugs but no one had the right socket. Thank god for the gf to take me to work

Sent from my iPhone using Tapatalk[/QUOTE

Damn nice work for day 1. I'm definitely taking longer than you lol. What's so special about the socket. I haven't got to that point yet.

jwick · 04-05-2016, 08:32 PM

I had to order the plug socket from Amazon

Sent from my iPhone using Tapatalk

TheWeez · 04-06-2016, 01:45 PM

It's a thin walled 14mm that is rare. Turbo mounted this morning

Going to have to wait until Sunday to finish because of work.

Sent from my iPhone using Tapatalk

jwick · 04-06-2016, 01:47 PM

Quote:

Originally Posted by TheWeez

It's a thin walled 14mm that is rare. Turbo mounted this morning

Going to have to wait until Sunday to finish because of work.

Sent from my iPhone using Tapatalk

Yes. ^^This^^

It's pretty hard to find a thin wall, deep socket, 14mm spark plug socket.

TcRocket · 04-06-2016, 02:41 PM

OK thanks got one ordered. My FI exhaust will be here tomorrow

jwick · 04-06-2016, 03:46 PM

Took the car out this morning to run errands. It was beastly today. It was high 70's/low 80's so must have been some weird combination of dense air and low humidity. She was so responsive I raped aped her for a few good pulls on the freeway.

TheWeez · 04-06-2016, 03:58 PM

If anyone with that spark plug socket can overnight it to me and I'll ship it back that would be amazing.

Sent from my iPhone using Tapatalk

TcRocket · 04-06-2016, 05:08 PM

Quote:

Originally Posted by TheWeez

If anyone with that spark plug socket can overnight it to me and I'll ship it back that would be amazing.

Sent from my iPhone using Tapatalk

It's seven bucks on Amazon

TheWeez · 04-06-2016, 05:48 PM

Oh I only saw the one that will ship out the 13th. Thanks

Extended the bracket hole one full hole to the right and she fits now

04-05-2016, 09:54 AM	#4 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3383	For whatever reason, the FMIC manufacturer has some slight inconsistencies with the mounting hole locations. The jigs I use for these brackets make all the brackets 100% the same. Sorry for the inconvenience that this may be causing. The brackets are 304 stainless, so they are not easy to drill, so if possible, try to elongate the FMIC mounting holes instead as it is a much softer material. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

04-05-2016, 10:36 AM	#5 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	Ok I'll try that thanks. As for the fuel rails, they just needed a good tug. Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-05-2016, 07:39 PM	#6 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	Haha well looks like day one is over. Oil cooler/pan/lines done except for the sensor (couldn't get that bugger off) injectors installed, turbo manifold bolted on, intake manifold tapped, and pump harness wired up. I tried to change the spark plugs but no one had the right socket. Thank god for the gf to take me to work Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-05-2016, 08:32 PM	#8 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	I had to order the plug socket from Amazon Sent from my iPhone using Tapatalk TheWeez likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-06-2016, 01:45 PM	#9 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	It's a thin walled 14mm that is rare. Turbo mounted this morning Going to have to wait until Sunday to finish because of work. Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-05-2016, 09:38 AM	#1 (permalink)
Sean1125R Base Member Join Date: Jan 2016 Location: NW Washington Posts: 69 Drives: 370Z Nismo Rep Power: 10	Is there a DIY page for the BP V 2.0 Turbo kits. Just curious is all.

04-06-2016, 01:43 PM	#7 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	[QUOTE=TheWeez;3452155]Haha well looks like day one is over. Oil cooler/pan/lines done except for the sensor (couldn't get that bugger off) injectors installed, turbo manifold bolted on, intake manifold tapped, and pump harness wired up. I tried to change the spark plugs but no one had the right socket. Thank god for the gf to take me to work Sent from my iPhone using Tapatalk[/QUOTE Damn nice work for day 1. I'm definitely taking longer than you lol. What's so special about the socket. I haven't got to that point yet.

04-06-2016, 02:41 PM	#11 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	OK thanks got one ordered. My FI exhaust will be here tomorrow jwick likes this.

04-06-2016, 03:46 PM	#12 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Took the car out this morning to run errands. It was beastly today. It was high 70's/low 80's so must have been some weird combination of dense air and low humidity. She was so responsive I raped aped her for a few good pulls on the freeway. EliteXpress and TheWeez like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-06-2016, 03:58 PM	#13 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	If anyone with that spark plug socket can overnight it to me and I'll ship it back that would be amazing. Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-06-2016, 05:48 PM	#15 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 24	BP V 2.0 turbo kits...ROUND 3 place your order now Oh I only saw the one that will ship out the 13th. Thanks Extended the bracket hole one full hole to the right and she fits now __________________ "It's not fast enough" - Edgar J. Hoover Last edited by TheWeez; 04-06-2016 at 09:09 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM