Stillen Air to Air setup

JWillis72 · 09-12-2015, 08:39 PM

That's not bad at all!

Sent from my iPhone using Tapatalk

StillenZ84 · 09-12-2015, 09:50 PM

Quote:

Originally Posted by JWillis72

That's not bad at all!

Sent from my iPhone using Tapatalk

Yep and even threw in the Torque Converter for free.

Masterbeatty · 09-14-2015, 07:53 AM

Do you have any video of the runs?

TopgunZ · 09-14-2015, 10:10 AM

Sorry, I did not take any. Ill make one of my next trip after I put on the new 3.4" js pulley....when she breaks 500

TopgunZ · 09-15-2015, 06:27 PM

Quote:

Originally Posted by JWillis72

Where did you get the bigger Jack shaft pulley? Seeing your numbers I'm realizing I need to send my 7AT to level 10.

Sent from my iPhone using Tapatalk

You can get them from vortech.

JWillis72 · 09-15-2015, 06:47 PM

I'm going to see what a get from the smaller sc pulley and the Stillen 9lb but now I know where to go next, thank you. Do you have a new dyno day scheduled? How does the car feel with the new set up?

I canceled my Sebring trip for the first weekend in October because things are going slow and seeing your number I think I would have killed my 7AT. Hopefully I will have the piping done in the next week.

Sent from my iPhone using Tapatalk

Z&I · 09-15-2015, 10:36 PM

Quote:

Originally Posted by TopgunZ

Sorry, I did not take any. Ill make one of my next trip after I put on the new 3.4" js pulley....when she breaks 500

Awesome
Gotta congratulate you ...

... you persevered and made it work, but not just work, you made it work really well.
I was also shooting for 550whp @ 14~15 psi [@sea level] with the built motor ... kudos ... the little V3 finally flexed its muscles !

TopgunZ · 09-16-2015, 10:47 AM

I do not have a dyno day setup. I am going to enjoy the rest of the warm weather with my wife and try to stay out of the garage. Besides.. I have to do some work to my truck now anyway. I bought some huge meat tires for it and I need to grind down the welds to fit them on...lol..

The car feels good. It is a lot of fun when high in the RPM band. My turbo felt like it was slowing down up there and this thing just climbs faster and faster..its a good rush.

The sound of the Mortordyne ART pipes is awesome. They are the perfect match for me. They are actually loudest at cruising speeds around 2K rpms. At idle they sound stock which is awesome because no more pissed off neighbors at 6:45am! At WOT they scream bloody murder and cruising they are tame yet have the aggressive note.

EVOHUNTER · 09-18-2015, 06:04 PM

The Map sensor conversion has been figured out!

Using our factory MAP sensor on the intake manifold.

This is what I've done - Wire #3 SB - MAF signal. This wire needs to be removed on both MAF sensors. Your map sensor is behind your throttle bodies bolted to your intake manifold.

Your MAP has 3 wires, Ground, Power, and signal. (easily found with your mulit-meter)
Your 2 MAF wires you removed earlier need to be spliced into you signal wire.

Note: this only works with ECUTEK speed density tuning.

JWillis72 · 09-18-2015, 09:14 PM

The guy that works on my car kept telling me that we could use that MAP if we needed it. Did you tune it?

Sent from my iPhone using Tapatalk

EVOHUNTER · 09-19-2015, 09:00 AM

Quote:

Originally Posted by JWillis72

The guy that works on my car kept telling me that we could use that MAP if we needed it. Did you tune it?

Sent from my iPhone using Tapatalk

No tune yet.

I could E-tune it on the road.

But im going to rent the dyno for 2 hours, and get sebz to e -tune me.

TopgunZ · 09-21-2015, 02:02 PM

Quote:

Originally Posted by EVOHUNTER

The Map sensor conversion has been figured out!

Using our factory MAP sensor on the intake manifold.

This is what I've done - Wire #3 SB - MAF signal. This wire needs to be removed on both MAF sensors. Your map sensor is behind your throttle bodies bolted to your intake manifold.

Your MAP has 3 wires, Ground, Power, and signal. (easily found with your mulit-meter)
Your 2 MAF wires you removed earlier need to be spliced into you signal wire.

Note: this only works with ECUTEK speed density tuning.

Nice work man! I might have to go this route in the future.

TopgunZ · 09-30-2015, 10:31 AM

Evohunter... I have been playing with bpv options and experimenting.

Are you still driving your car with the turbosmart making turkey calls on high rpm decells?

TopgunZ · 09-30-2015, 10:32 AM

Quote:

Originally Posted by JWillis72

I'm going to see what a get from the smaller sc pulley and the Stillen 9lb but now I know where to go next, thank you. Do you have a new dyno day scheduled? How does the car feel with the new set up?

I canceled my Sebring trip for the first weekend in October because things are going slow and seeing your number I think I would have killed my 7AT. Hopefully I will have the piping done in the next week.

Sent from my iPhone using Tapatalk

Any info on the piping?

JWillis72 · 09-30-2015, 10:48 AM

The guy went on vacation and didn't tell me. It's been there for three weeks and they finally started on them this morning. Hopefully it will get moving now!

Sent from my iPhone using Tapatalk

09-12-2015, 08:39 PM	#451 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	That's not bad at all! Sent from my iPhone using Tapatalk StillenZ84 likes this.

09-14-2015, 07:53 AM	#453 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	Do you have any video of the runs? __________________ 2011 MB 6MT Masterbeatty journal

09-14-2015, 10:10 AM	#454 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Sorry, I did not take any. Ill make one of my next trip after I put on the new 3.4" js pulley....when she breaks 500 Z&I and wsarver like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

09-16-2015, 10:47 AM	#458 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I do not have a dyno day setup. I am going to enjoy the rest of the warm weather with my wife and try to stay out of the garage. Besides.. I have to do some work to my truck now anyway. I bought some huge meat tires for it and I need to grind down the welds to fit them on...lol.. The car feels good. It is a lot of fun when high in the RPM band. My turbo felt like it was slowing down up there and this thing just climbs faster and faster..its a good rush. The sound of the Mortordyne ART pipes is awesome. They are the perfect match for me. They are actually loudest at cruising speeds around 2K rpms. At idle they sound stock which is awesome because no more pissed off neighbors at 6:45am! At WOT they scream bloody murder and cruising they are tame yet have the aggressive note. roplusbee, ANMVQ, EVOHUNTER and 2 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 09-16-2015 at 12:26 PM.

09-18-2015, 06:04 PM	#459 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	The Map sensor conversion has been figured out! Using our factory MAP sensor on the intake manifold. This is what I've done - Wire #3 SB - MAF signal. This wire needs to be removed on both MAF sensors. Your map sensor is behind your throttle bodies bolted to your intake manifold. Your MAP has 3 wires, Ground, Power, and signal. (easily found with your mulit-meter) Your 2 MAF wires you removed earlier need to be spliced into you signal wire. Note: this only works with ECUTEK speed density tuning. Masterbeatty, TopgunZ and Z&I like this. __________________

09-15-2015, 06:47 PM	#456 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I'm going to see what a get from the smaller sc pulley and the Stillen 9lb but now I know where to go next, thank you. Do you have a new dyno day scheduled? How does the car feel with the new set up? I canceled my Sebring trip for the first weekend in October because things are going slow and seeing your number I think I would have killed my 7AT. Hopefully I will have the piping done in the next week. Sent from my iPhone using Tapatalk

09-18-2015, 09:14 PM	#460 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	The guy that works on my car kept telling me that we could use that MAP if we needed it. Did you tune it? Sent from my iPhone using Tapatalk

09-30-2015, 10:31 AM	#463 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Evohunter... I have been playing with bpv options and experimenting. Are you still driving your car with the turbosmart making turkey calls on high rpm decells? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 09-30-2015 at 10:58 AM.

09-30-2015, 10:48 AM	#465 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	The guy went on vacation and didn't tell me. It's been there for three weeks and they finally started on them this morning. Hopefully it will get moving now! Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM