Nissan 370Z Forum
Page 24 of 114 « First 142223 24 25263474 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Stillen Air to Air setup (http://www.the370z.com/forced-induction/104308-stillen-air-air-setup.html)

jwick 08-24-2015 07:01 PM
Quote:
Originally Posted by JWillis72 (Post 3293004)
That's a big pipe.

That's what she said!

TopgunZ 08-24-2015 10:02 PM
Quote:
Originally Posted by EliteXpress (Post 3292974)
This pipe would fit.

JWillis72 08-25-2015 06:28 PM
TopgunZ, are you still going to the dyno tomorrow?


Sent from my iPhone using Tapatalk

TopgunZ 08-25-2015 09:44 PM
3 Attachment(s)
Yes I am. Heres some almost finished pics.

JWillis72 08-26-2015 06:24 AM
Good luck today!

ANMVQ 08-26-2015 08:05 AM
is the bumper going to fit back on :)

TopgunZ 08-26-2015 08:15 AM
Quote:
Originally Posted by JWillis72 (Post 3293955)
Good luck today!
Thank you!
Quote:
Originally Posted by ANMVQ (Post 3294024)
is the bumper going to fit back on :)
Yes, it was designed for fitment. My stillen will anyway. Oem, probably not.

TopgunZ 08-26-2015 12:46 PM
Car wont dyno. Huge oversight. Since I used the stillen y pipe my mafs are in backwards. It was a pull through and I am using it as blow through.

Back to the drawing board.

jwick 08-26-2015 12:50 PM
Quote:
Originally Posted by TopgunZ (Post 3294231)
Car wont dyno. Huge oversight. Since I used the stillen y pipe my mafs are in backwards. It was a pull through and I am using it as blow through.

Back to the drawing board.

Oops. I'm surprised it ran.

JWillis72 08-26-2015 01:07 PM
Oh crap, sorry to hear it.

TopgunZ 08-26-2015 02:24 PM
Problem solved. Just opened up the holes and flipped the mafs. But now she runs pig rich.

Edit...Meant lean as hell. My AFR is set to Lambda and I am at 1.29 which is high as it can read so it could be well over that. Not safe to drive on. I am getting a new map made but I keep running into people on vacation. The guy that will build it for me left last night and won't be back until next week. Once I have the map I can take it down the 40 miles to the tune shop.

JWillis72 08-26-2015 02:27 PM
Did you reschedule dyno time?


Sent from my iPhone using Tapatalk

EVOHUNTER 08-27-2015 10:54 AM
That sucks dude! I haven't heard back from Sasha yet. Im not sure what we will do at this point. Hopefully everything goes well for you!

TopgunZ 08-27-2015 11:19 AM
Yes he will not reply to my concerns about the piping I purchased from him.

I have rescheduled the dyno for Saturday the 12th of Sept. Soooooo...till then. :confused:

swiss370Z 08-27-2015 12:47 PM
Quote:
Originally Posted by TopgunZ (Post 3295062)
Yes he will not reply to my concerns about the piping I purchased from him.

I have rescheduled the dyno for Saturday the 12th of Sept. Soooooo...till then. :confused:
Hey TopgunZ

I wish You the best :tup:
I feel for you!
It sometimes takes a little longer ....:stirthepot:
I could tell you my story!
But that would take far too long................

Keep up the good Work Sir :tup::tup:


All times are GMT -5. The time now is 01:28 AM.
Page 24 of 114 « First 142223 24 25263474 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2