Full car plastidip in Koi Orange...

Jayhovah

Until I feel like changing it up! I didn't buy quite enough dip...so I am pretty sure I will need to dip it again before I could peel it off anyway. I am hoping to do some graphics in the next few weeks as well.

For the most part... in some places where there isn't a big enough gap between rubber/plastic trim and the body its hard to peel..(example: rubber around rear glass.... black plastic around side mirrors) I ended up cutting those areas with an X-acto knife but it didn't come out great and I slipped with the knife and accidentally scratched my paint in one spot=(. Next time I will mask these and pull the tape while my last coat is wet (standard procedure with dip).

I also didn't spray enough on the side windows to peel it easy - next time I will mask all the way to the moulding to save dip and hassle. Lots of lessons learned this first time!

$800 seems like an ok price... the whole kit from DYC was only $450 though (including dip) and now I can dip again for just the cost of the gallons. The project took me about 10 hours total - I expect to cut that down to 6 or 7 next time though now that I have experience.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted