EVO-R 370Z Rear Diffuser

Majestik · 05-21-2010, 05:13 PM

Quote:

Originally Posted by JB-370z

updates?

Gimme a few days. We've got a cruise tomorrow and I'll get someone with a pro camera to take some snaps.

The fitment is a lot better than I thought but it took a lot for screws to hold.

There's still a gap on the left and right edges and underneath the corners but I've disguised it the best I can with chrome stripping.

Pics up in a few days. My apologies as my phone camera sux.

simota1 · 05-21-2010, 05:19 PM

if you use the 4 threaded holes in the back of the diffuser.... itll fit and align perfectly... rather than the screws alone... only problem is doing the layout for drilling the holes is kinda hard... i actually made tabs on my rear bumper so there was play room and i could center it...

Majestik · 05-21-2010, 10:00 PM

Quote:

Originally Posted by simota1

if you use the 4 threaded holes in the back of the diffuser.... itll fit and align perfectly... rather than the screws alone... only problem is doing the layout for drilling the holes is kinda hard... i actually made tabs on my rear bumper so there was play room and i could center it...

I actually got mine professionally fitted by the panel shop that's looked after the last 5 of my cars.

I am unsure how flexible the non-cf diffuser is but I can tell you now that my cf is extremely difficult to bend..

370Z JT · 05-21-2010, 10:41 PM

Quote:

Originally Posted by Majestik

I actually got mine professionally fitted by the panel shop that's looked after the last 5 of my cars.

I am unsure how flexible the non-cf diffuser is but I can tell you now that my cf is extremely difficult to bend..

Did they follow EVOR's detailed instructions on how to install? I'm assuming they removed the bumper from the car as well?

simota1 · 05-22-2010, 12:19 AM

Quote:

Originally Posted by Majestik

I actually got mine professionally fitted by the panel shop that's looked after the last 5 of my cars.

I am unsure how flexible the non-cf diffuser is but I can tell you now that my cf is extremely difficult to bend..

the non cf diffuser is difficult to bend as well.... in fact lol it doesnt bend well... u could actually crack it like the carbon.... using the self tap screws alone and double stick tape wont do the job.... the non cf version are hallow so u only have a thin layer of fiber glass to screw it on too... which isnt that good... the self taps wont have enough meat on them and could actually pull them selves off.... btw man... im not trying to offend you or sound like a know it all.. im just saying..... for other peoples reference who install them

Majestik · 05-22-2010, 04:55 AM

Quote:

Originally Posted by simota1

the non cf diffuser is difficult to bend as well.... in fact lol it doesnt bend well... u could actually crack it like the carbon.... using the self tap screws alone and double stick tape wont do the job.... the non cf version are hallow so u only have a thin layer of fiber glass to screw it on too... which isnt that good... the self taps wont have enough meat on them and could actually pull them selves off.... btw man... im not trying to offend you or sound like a know it all.. im just saying..... for other peoples reference who install them

Dont be silly Simota1. Your status as a good guy on this forum is legendary!

I wouldn't think you were offending me even if you were...

Also, no I didn't follow the instructions. The panel shop just did whatever was required to hold it.

simota1 · 05-22-2010, 08:10 AM

Quote:

Originally Posted by Majestik

Dont be silly Simota1. Your status as a good guy on this forum is legendary!

I wouldn't think you were offending me even if you were...

Also, no I didn't follow the instructions. The panel shop just did whatever was required to hold it.

haha thanks man...

05-21-2010, 05:19 PM	#2 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	if you use the 4 threaded holes in the back of the diffuser.... itll fit and align perfectly... rather than the screws alone... only problem is doing the layout for drilling the holes is kinda hard... i actually made tabs on my rear bumper so there was play room and i could center it... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil change, Jack stands or ramps with diffuser?	spearfish25	Nissan 370Z General Discussions	31	08-10-2010 08:38 PM
Name this rear diffuser!	JoeD	Exterior & Interior	13	05-22-2010 07:45 PM
rear diffuser	jrmlk	Exterior & Interior	5	08-20-2009 09:58 PM
k40 calibre laser diffuser and detector.	dahbour	The Lounge (Off Topic)	2	08-17-2009 03:16 PM
Rear Diffuser 370Z	355890	Exterior & Interior	9	07-01-2009 08:17 PM