Carbon fiber amuse install help needed

pfdaxe

Well, many of you know there's an issue with the hole in the skid plate being too small to change oil (unless you want to remove bumper every time). The hole is just large enough to get to the plug, but not the filter. I hadn't seen any pics of what it looked like so I decided to snap a few for reference. After I made the hole larger, I test fit the bumper and the hole was perfect size to drain oil and replace filter with my thermo plate. I forgot to snap a pic with it mounted, but I will when back from paint. I'm thinking about putting a nice piece of rubber trim around it to clean it up a bit.

Regular snips cut like butter

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html