Front windshield Replacement

Ghostvette · 09-26-2016, 11:22 AM

Quote:

Originally Posted by cigarclifford

same here and I'm on my 5th windshield

-Clifford

Quote:

Originally Posted by Firebase99

What are you, a stunt driver? Good Lord.

Almost 100k miles on his NISMO. I'll bet the windshield gets sand-blasted out in Cali. My Camaro had 3 in the 3 years I had it because of sand.

axio · 11-03-2016, 05:45 PM

Just had mine done by safelite, requested Pilkington. After closing the hood right after the tech drove away, noticed the A-pillar doesn't line up right on one side, and that same side's A-pillar cover is pretty loose near the bottom even though the clip at the bottom of the cover is attached... Do you guys know if the A-pillar cover's weatherstripping is supposed to sit over the plastic weatherguard at the bottom of the windshield near the hood, or if it supposed to sit under it? Currently they have the A-pillar's sitting above it.

When you guys press on your A-pillar or try to wobble it around, is it pretty solid near the bottom of the A-pillar? Never really paid attention but it does move around now.

JARblue · 11-08-2016, 09:32 AM

Quote:

Originally Posted by axio

Just had mine done by safelite, requested Pilkington. After closing the hood right after the tech drove away, noticed the A-pillar doesn't line up right on one side, and that same side's A-pillar cover is pretty loose near the bottom even though the clip at the bottom of the cover is attached... Do you guys know if the A-pillar cover's weatherstripping is supposed to sit over the plastic weatherguard at the bottom of the windshield near the hood, or if it supposed to sit under it? Currently they have the A-pillar's sitting above it.

When you guys press on your A-pillar or try to wobble it around, is it pretty solid near the bottom of the A-pillar? Never really paid attention but it does move around now.

It's definitely supposed to go over the top of the plastic shroud at the bottom of the windshield. And I checked both of my Z's A-pillars for movement - neither has ever been removed. They definitely wobble back and forth more than I ever noticed or would have guessed. Maybe 1/2" play overall. So it sounds like you're probably ok.

madeinjapan · 11-08-2016, 09:45 AM

Quote:

Originally Posted by Minsu

So mine cracked due to a rock chip, anyone know the general ballpark estimate for a new one? And it cant be repaired the crack is way to big, look at your thumb fingernail, you have that inner sunshine looking thing that what it looks like if your whole thumbnail was the windshield.

$100 deductible

JARblue · 11-08-2016, 09:46 AM

Quote:

Originally Posted by madeinjapan

$100 deductible

You just responded to a 2.5 year old post

madeinjapan · 11-08-2016, 10:10 AM

Quote:

Originally Posted by JARblue

It's definitely supposed to go over the top of the plastic shroud at the bottom of the windshield. And I checked both of my Z's A-pillars for movement - neither has ever been removed. They definitely wobble back and forth more than I ever noticed or would have guessed. Maybe 1/2" play overall. So it sounds like you're probably ok.

Quote:

Originally Posted by JARblue

You just responded to a 2.5 year old post

you just posted today in here ???

JARblue · 11-08-2016, 10:33 AM

Quote:

Originally Posted by madeinjapan

you just posted today in here ???

And what's your fuckin point? I responded to a post that was 6 days old. With a relevant answer I might add. Do you have a problem with that?

You, on the other hand, continue to $hit all over threads on this forum with useless garbage. You responded to the OP from July 2014. With an absolutely worthless response

11-03-2016, 05:45 PM	#2 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 18	Just had mine done by safelite, requested Pilkington. After closing the hood right after the tech drove away, noticed the A-pillar doesn't line up right on one side, and that same side's A-pillar cover is pretty loose near the bottom even though the clip at the bottom of the cover is attached... Do you guys know if the A-pillar cover's weatherstripping is supposed to sit over the plastic weatherguard at the bottom of the windshield near the hood, or if it supposed to sit under it? Currently they have the A-pillar's sitting above it. When you guys press on your A-pillar or try to wobble it around, is it pretty solid near the bottom of the A-pillar? Never really paid attention but it does move around now. __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tint on front windshield?	wat2win	Exterior & Interior	55	03-01-2019 11:26 AM
Windshield glass replacement	darli328	Exterior & Interior	31	11-23-2013 12:54 AM
Windshield replacement	KingJoseph	Nismo 370Z	2	07-10-2013 10:25 AM
Pls recommend a Windshield Replacement shop in Philly/S. NJ area	k.alexander	Nissan 370Z General Discussions	1	04-01-2013 04:27 PM
Houston Windshield Replacement Suggestions	zero610	Texas	1	06-30-2010 08:07 AM