MoonBeam Widebody kit from Carbonsignal

KaienZ34 · 03-02-2014, 05:52 PM

What's the sizes and offsets of the wheels your test fitting?

sfearl1 · 03-03-2014, 08:50 AM

Sorry if this has been posted.. when will final pics be up?

cooltoy · 03-03-2014, 09:11 AM

I'd guess, when the car is finished.

Mr&Mrs · 03-03-2014, 10:52 AM

By the pics I would guess by end of this week or next at the latest. Especially if they want sponsored cars ready by April.

DOM_370z · 03-03-2014, 11:10 AM

PM sent. Thanks

370ZNISMO#704 · 03-03-2014, 11:39 AM

Hmmm this looks tempting. I have 20"-10.5 +15 square setup and a 20mm in rear putting it at 10.5 -5 with good poke front and rear. But would love to take the neg camber out and get some meat on.

I'll text you Naj today. Show season is coming soon.

BrooklynBully · 03-03-2014, 11:39 AM

Work Hs202's 20x9.5 20x10.5 Think this kit would work on a Nismo ? I am in NY... I know the Dudes at Ravspec..

cooltoy · 03-03-2014, 12:15 PM

Quote:

Originally Posted by BrooklynBully

Work Hs202's 20x9.5 20x10.5 Think this kit would work on a Nismo ? I am in NY... I know the Dudes at Ravspec..

PM the proposal to them.

Masterbeatty · 03-03-2014, 05:28 PM

Now do these fender flairs require to cut the fenders and rear quarter panels? Or do they just screw on?

KaienZ34 · 03-04-2014, 12:00 PM

Ok wheel guys, please PM me or post on my profile what your thoughts are on wheel/size/spec based on the info from CS on this page. That will give a nice flush look maybe small poke, lowered but not slammed (don't want to cut the rear fenders) so a small gap between fender and tire. With coils and as close to normal camber as possible.

CarbonSignal · 03-23-2014, 12:37 AM

Finally we got the approval done by insurance on Wednesday for the door damage, took a lot of time, car getting painted as of now.

One good thing we saw fenders were going on easily on one amuse kit with very little modification mainly pressing, and we currently altering the small fender pieces for Nismo as well

Z34_Nismo · 03-23-2014, 02:32 AM

Glad to hear the Nismo is getting some wide options too!

I have the V2 fenders, would these work without having to cut into the wide portion - mainly where the vents start? I'm hoping the wide portion starts to taper back around that area so that it flows with the V2 fenders.

CarbonSignal · 03-23-2014, 02:51 AM

Quote:

Originally Posted by Z34_Nismo

Glad to hear the Nismo is getting some wide options too!

I have the V2 fenders, would these work without having to cut into the wide portion - mainly where the vents start? I'm hoping the wide portion starts to taper back around that area so that it flows with the V2 fenders.

our demo car has stock fenders on one side and V2 on other side

so will work with both slightly different design.

CarbonSignal · 03-24-2014, 04:42 AM

So today Nismo left the shop after kit was finalized for Nismo bumpers and side skirts.

We will be shipping out first Moonbeam for first Nismo to USA next week

KaienZ34 · 03-24-2014, 06:16 AM

Looking good, i can't wait to see the whole thing finished.

03-02-2014, 05:52 PM	#1 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 179	What's the sizes and offsets of the wheels your test fitting? __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-03-2014, 08:50 AM	#2 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 19	Sorry if this has been posted.. when will final pics be up? __________________ Scott

03-03-2014, 10:52 AM	#4 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	By the pics I would guess by end of this week or next at the latest. Especially if they want sponsored cars ready by April. CarbonSignal likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

03-03-2014, 11:10 AM	#5 (permalink)
DOM_370z Enthusiast Member Join Date: Nov 2011 Location: Sacramento, CA Posts: 391 Drives: '14 370z PW 6MT Rep Power: 15	PM sent. Thanks __________________ Dom [Team NuGen] 2014 370z PW/6MT/Base/Sport My Build Thread

03-03-2014, 11:39 AM	#6 (permalink)
370ZNISMO#704 Enthusiast Member Join Date: Nov 2010 Location: Seattle Posts: 466 Drives: Nismo10,EgH22,TSX04 Rep Power: 16	Hmmm this looks tempting. I have 20"-10.5 +15 square setup and a 20mm in rear putting it at 10.5 -5 with good poke front and rear. But would love to take the neg camber out and get some meat on. I'll text you Naj today. Show season is coming soon. CarbonSignal and synolimit like this. __________________ 2010NISMO•305.9whp 250tq Osirus•STANCE GR+•and Camber & Toe bars•KICS R 20mm•VOSSEN CV3 20"-10.5x4•Stillen GENIII•AAM S-Line Nimso mid-pipe•CarbonSignal Sponsored car•EVOR F1mirrors•NST short shifter•Zspeed Nismo under tray.

03-03-2014, 09:11 AM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243725	I'd guess, when the car is finished.

03-03-2014, 05:28 PM	#9 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122869	Now do these fender flairs require to cut the fenders and rear quarter panels? Or do they just screw on? __________________ 2011 MB 6MT Masterbeatty journal

03-04-2014, 12:00 PM	#10 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 179	Ok wheel guys, please PM me or post on my profile what your thoughts are on wheel/size/spec based on the info from CS on this page. That will give a nice flush look maybe small poke, lowered but not slammed (don't want to cut the rear fenders) so a small gap between fender and tire. With coils and as close to normal camber as possible. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-23-2014, 12:37 AM	#11 (permalink)
CarbonSignal A True Z Fanatic Join Date: Jan 2011 Location: Dubai/California Posts: 2,092 Drives: 370z Rep Power: 22	Finally we got the approval done by insurance on Wednesday for the door damage, took a lot of time, car getting painted as of now. One good thing we saw fenders were going on easily on one amuse kit with very little modification mainly pressing, and we currently altering the small fender pieces for Nismo as well tibal, Amuse370z and carlitos_370z like this. __________________ CS 2018 Summer Nismo NEW GB............MOONBEAM Forum OFFER.....................09-14 CS Nismolipkit Forum OFFER Facebook.... Instagram ....Website

03-23-2014, 02:32 AM	#12 (permalink)
Z34_Nismo Base Member Join Date: Oct 2012 Location: Houston, TX Posts: 172 Drives: Nismo Moonbeam Rep Power: 14	Widebody...over fenders...Interest Glad to hear the Nismo is getting some wide options too! I have the V2 fenders, would these work without having to cut into the wide portion - mainly where the vents start? I'm hoping the wide portion starts to taper back around that area so that it flows with the V2 fenders. __________________ CarbonSignal: V2 Fenders, Nismo Moonbeam & Lip Kit\|Swift Springs\|aFe Stage 2 Intakes\|Berk HFC\|Finite Element RC Ducts\|NST UD Pulley Kit

03-24-2014, 06:16 AM	#15 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 179	Looking good, i can't wait to see the whole thing finished. carlitos_370z likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Track widebody	Reaper42	Track / Autocross / Drifting / Dragstrip	13	04-12-2013 12:49 PM
RS widebody	Reaper42	Exterior & Interior	10	04-03-2013 05:17 PM
Photoshoot: Our widebody e92 M3	GTHAUS	Other Vehicles	24	02-16-2012 09:38 AM
Widebody u say??...yes please!	Soon	Exterior & Interior	285	01-31-2011 03:30 PM
Tamon Widebody	370Ztune	Exterior & Interior	23	10-15-2010 05:31 PM