Fix for the rattling front under tray.

Rusty · 10-28-2013, 04:27 PM

I have the Zspeed aluminum front under tray installed. I had clipped a few corners while doing track days and hit a road kill one time. This had popped the 3 plastic fasteners off from under the Z. You know the 3. On the part of the frame in front of the engine. While here is my fix for never again having those 3 pieces of plastic mess with me.

This will work with the stock plastic under tray too.

Ordered from McMaster-Carr some rivet-nuts. A 25/64" drill bit, a 1/4 fender washer, 3 1/4x20 stainless bolts, 3 1/4" stainless flat washers.

Rusty · 10-28-2013, 04:33 PM

First step. Drill the 3 holes with the 25/64" drill.

Second step. Put the fender washer in the vice. Put the bolt through the washer and thread on the rivet-nut. Now start to tighten down on the rivet-nut alittle bit. Just enough to start it to squeeze out. This is to make sure that the rivet-nut is biting down on the fender washer.

Rusty · 10-28-2013, 04:40 PM

Third step. Install the rivet-nut and fender washer into one of the holes. You have to tap it in with a hammer. Now put a pair of vise-grips on the fender washer to hold it while you tighten down on the rivet-nut. When you think you have it tight enough. Remove the bolt and take a look. Now do the other two holes the same way.

If anybody is interested. I got some left over rivet-nuts.

gurneyeagle · 10-28-2013, 05:55 PM

As usual, excellent write-up Rusty!

scruffydog · 10-28-2013, 06:32 PM

Quote:

Originally Posted by Rusty

I have the Zspeed aluminum front under tray installed. I had clipped a few corners while doing track days and hit a road kill one time. This had popped the 3 plastic fasteners off from under the Z. You know the 3. On the part of the frame in front of the engine. While here is my fix for never again having those 3 pieces of plastic mess with me.

This will work with the stock plastic under tray too.

Ordered from McMaster-Carr some rivet-nuts. A 25/64" drill bit, a 1/4 fender washer, 3 1/4x20 stainless bolts, 3 1/4" stainless flat washers.

thanks for the write up...funny thing i was dealing with that issue the other day....the 3 plastic clip completely ripped a giant hole in my undertray.

sparky · 10-28-2013, 07:41 PM

Great idea and shame on the auto industry for inventing these stupid clips and using them to hold half the car together.

Sorry, end of rant.

Rusty · 10-29-2013, 07:03 AM

I got a bunch of rivet-nuts left. Bought like 25 of them. If anybody wants some. Let me know.

kenchan · 10-29-2013, 09:28 AM

Quote:

Originally Posted by sparky

Great idea and shame on the auto industry for inventing these stupid clips and using them to hold half the car together.

Sorry, end of rant.

true true... im wondering if the clips were stronger, would it cause more impact damage to the panels since the clips would not give away?

sometimes it's better for these clips to break off. clips are easy to replace, body panels, etc, not so much.

GJ -rusty.

i like looking at your workshop-DIY's.

takjak2 · 11-02-2013, 08:10 PM

saving to later

scottIN · 11-04-2013, 06:44 AM

So for a long time, I've had a rattle / buzz at certain RPMs (2500-2700). Quite annoying. I was pretty sure it was coming from the hatch area.

Last week, I trashed my Stillen spoiler. Few days ago, got under the car to remove the remnants. It was thru-bolted so I had to remove the undertray. Took everything off, removed what was left of the spoiler and put it all back together. Now there's no buzz!

Though I didn't do this fix, I'm thinking that the buzz was coming from the undertray and just echoing so it sounded like it was coming from the rear. Maybe one of the clips wasn't in super tight or I just tweaked it in a way that stopped it from rattling. We'll see...

I'da bet anything that the noise was from the rear, but I guess it was just finding channels & echoing off the hatch.

kenchan · 11-04-2013, 09:53 AM

or your car was warmer and that particular frequency did not resonate...

10-28-2013, 05:55 PM	#4 (permalink)
gurneyeagle A True Z Fanatic Join Date: Jul 2011 Location: Houston/Saint Augustine Posts: 2,681 Drives: '18 Audi TT RS Rep Power: 20214	As usual, excellent write-up Rusty! Rusty likes this. __________________ Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

10-28-2013, 07:41 PM	#6 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 14	Great idea and shame on the auto industry for inventing these stupid clips and using them to hold half the car together. Sorry, end of rant. didymus and Holy like this. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

10-29-2013, 07:03 AM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,851 Drives: 2011 Nismo GM 6M Rep Power: 2684436	I got a bunch of rivet-nuts left. Bought like 25 of them. If anybody wants some. Let me know. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-02-2013, 08:10 PM	#9 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	saving to later __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2013, 06:44 AM	#10 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 54	So for a long time, I've had a rattle / buzz at certain RPMs (2500-2700). Quite annoying. I was pretty sure it was coming from the hatch area. Last week, I trashed my Stillen spoiler. Few days ago, got under the car to remove the remnants. It was thru-bolted so I had to remove the undertray. Took everything off, removed what was left of the spoiler and put it all back together. Now there's no buzz! Though I didn't do this fix, I'm thinking that the buzz was coming from the undertray and just echoing so it sounded like it was coming from the rear. Maybe one of the clips wasn't in super tight or I just tweaked it in a way that stopped it from rattling. We'll see... I'da bet anything that the noise was from the rear, but I guess it was just finding channels & echoing off the hatch.

11-04-2013, 09:53 AM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	or your car was warmer and that particular frequency did not resonate...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Nismo plastic underbody tray	BrandonSS	Parts for sale (Private Classifieds)	17	11-15-2013 02:01 PM
[FOR SALE] Arm Rest Cup Holder Tray	stubie1918	Parts for sale (Private Classifieds)	26	07-15-2013 07:45 PM
WTB:370z console tray/cup holder	ryang	Wanted	2	06-28-2012 06:25 PM
WTB:370z console tray	SvR370z	Wanted	6	09-06-2011 04:10 PM
anyone ever try these Wheelmate Steering Wheel Desk Tray	AK370Z	The Lounge (Off Topic)	7	07-16-2010 08:37 AM