Yaw sensor switch

sschaffer27 · 05-29-2016, 08:18 PM

I was doing this mod and installing an LED rocker switch, when i accidentally touched a wire to the hand brake bolt. I got a nice spark and now I'm having all sorts of issues:

- ABS light on
- VDC light on (even with cut wire reconnected)
- key fob light on
- tpms light on

The car will start fine, but the push button isn't responsive in trying to turn the car off.

Did I fry a bunch of electronics or is there a blown fuse that I'm missing??

SouthArk370Z · 05-30-2016, 06:22 AM

Quote:

Originally Posted by sschaffer27

I was doing this mod and installing an LED rocker switch, when i accidentally touched a wire to the hand brake bolt. ... Did I fry a bunch of electronics or is there a blown fuse that I'm missing??

IIRC, there are two fuse blocks: one near to the driver door hinge (easy to get to) and the other next to the battery (PITA to get to).

The FSM will have wiring diagrams, diagnostic procedures, fuse locations, &c.

Disconnect the battery when doing electrical work.

pokeyl · 05-30-2016, 05:51 PM

Traction Controll Completely Off?
another thread

Last, if you could turn the sensor 90 degrees, it would not not have any input?

sschaffer27 · 05-31-2016, 06:45 AM

Quote:

Originally Posted by pokeyl

Traction Controll Completely Off?
another thread

Last, if you could turn the sensor 90 degrees, it would not not have any input?

Thanks Pokey. I got it figured out in another thread. I forgot about the large fuse box in the battery compartment. Then after going for a spin around the neighborhood, the other items fixed themselves.

Sent from my iPhone using Tapatalk

370Zoey · 08-09-2017, 10:13 PM

Sounds Like you either blew the ABS fuse or actually Fried the ABS control Module. Same issues if you disconnect the connector that goes to the module.

05-29-2016, 08:18 PM	#1 (permalink)
sschaffer27 Base Member Join Date: Jun 2012 Location: Cincinnati Posts: 11 Drives: '12 Nismo 370z Rep Power: 14	HELP - fuse? I was doing this mod and installing an LED rocker switch, when i accidentally touched a wire to the hand brake bolt. I got a nice spark and now I'm having all sorts of issues: - ABS light on - VDC light on (even with cut wire reconnected) - key fob light on - tpms light on The car will start fine, but the push button isn't responsive in trying to turn the car off. Did I fry a bunch of electronics or is there a blown fuse that I'm missing??

05-30-2016, 05:51 PM	#3 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 901 Drives: ??? Rep Power: 56	Traction Controll Completely Off? another thread Last, if you could turn the sensor 90 degrees, it would not not have any input? __________________ It's not my fault I'm old, I was born a very long time ago!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
YAW Sensor Rocker Switch	dP3NGU1N	DIY Section (Do-It-Yourself)	23	11-10-2013 05:57 PM
Viper Security System/Tilt sensor/Proximity sensor	kfull	Nissan 370Z General Discussions	4	04-27-2012 12:10 AM
Need help o2 sensor	dinobino	Intake/Exhaust	2	10-15-2010 12:59 PM
WTB: oem AFR sensor	DJ_TJ	Wanted	9	01-18-2010 04:46 PM
O2 Sensor	Knives	Intake/Exhaust	8	01-10-2010 08:06 PM

08-09-2017, 10:13 PM	#5 (permalink)
370Zoey Base Member Join Date: Apr 2017 Location: Anderson Posts: 1 Drives: 12 Nissan 370z WT M6 Rep Power: 10	Sounds Like you either blew the ABS fuse or actually Fried the ABS control Module. Same issues if you disconnect the connector that goes to the module.