Interest check - ~Kellyefields~ custom hood damper kit

kellyefields · 02-11-2013, 07:16 PM

gurneyeagle thanks for the great guy post. I appreciate knowing that people appreciate me helping out.

On to business. the parts arrived today and I quality checked them and they are the best yet. This new company did right by us. I have made the small modification needed to bolt the bracket to the hood and they are all packed up in the back of the wifes car ready for her to take them to the post office tomorrow. she will get a delivery confirmation number I will be able to send to those in the us. Sorry for the Canada folks they dont do delivery confirmation but I will put in paypal that they have shipped and add the delivery confirmation number for in the US.

I currently have 8 sets left ready to ship when orders are placed so if you are interested you will get them within a week depending on where you are located.

Even though I provide a detailed install sheet I will also be doing another install video with CHPT11 this friday and will post it here for all to see. He has a new 2013 and this will be the first time the hood struts will be going on so you will be able to see how it is done and will be walked through any steps to correct any problems if they occur. I will do one side and turn it over to him so you can see that this can be done by anyone that gets this. Also of note if you have any issues you can always PM me and I will send you my phone number and I will help you dignose any issues which with this set I do not forsee any issues with from what I can tell from checking these struts.

Again I only have 8 sets remaining and since I front the cost of these I cannot do another build until I have at least 10 committed buyers and with that comes a longer wait.

Mitco39 · 02-11-2013, 07:18 PM

Woot Woot!

dmhenderson · 02-11-2013, 07:20 PM

Quote:

Originally Posted by kellyefields

gurneyeagle thanks for the great guy post. I appreciate knowing that people appreciate me helping out.

On to business. the parts arrived today and I quality checked them and they are the best yet. This new company did right by us. I have made the small modification needed to bolt the bracket to the hood and they are all packed up in the back of the wifes car ready for her to take them to the post office tomorrow. she will get a delivery confirmation number I will be able to send to those in the us. Sorry for the Canada folks they dont do delivery confirmation but I will put in paypal that they have shipped and add the delivery confirmation number for in the US.

I currently have 8 sets left ready to ship when orders are placed so if you are interested you will get them within a week depending on where you are located.

Even though I provide a detailed install sheet I will also be doing another install video with CHPT11 this friday and will post it here for all to see. He has a new 2013 and this will be the first time the hood struts will be going on so you will be able to see how it is done and will be walked through any steps to correct any problems if they occur. I will do one side and turn it over to him so you can see that this can be done by anyone that gets this. Also of note if you have any issues you can always PM me and I will send you my phone number and I will help you dignose any issues which with this set I do not forsee any issues with from what I can tell from checking these struts.

Again I only have 8 sets remaining and since I front the cost of these I cannot do another build until I have at least 10 committed buyers and with that comes a longer wait.

Great. Please make sure mine gets to Maryland by Saturday! If you need me to pay more for shipping, please let me know. I know your margins aren't great.

kellyefields · 02-11-2013, 07:25 PM

Quote:

Originally Posted by dmhenderson

Great. Please make sure mine gets to Maryland by Saturday! If you need me to pay more for shipping, please let me know. I know your margins aren't great.

there should be no problem in you getting them unless the weather delays the mail or by some act the post office looses them. I have never had this happen but I am knocking on wood right now just to be on the safe side.

Rocket · 02-12-2013, 07:28 AM

PM Sent.

kellyefields · 02-12-2013, 07:01 PM

Have 7 sets left. Due to shipping costs to canada going up all orders from here on out shipped out of the us would be 110 plus paypal fees. I will eat the cost for those that have already ordered but from here on out I must charge what it costs me to ship them.

all orders placed by yesterday shipped today. Another shipping day will be this thrusday.

Mitco39 · 02-12-2013, 07:41 PM

I have no trouble covering the added cost of having to ship it up here

Thanks again for doing this.

Mitch

LMBmikeZ · 02-12-2013, 09:27 PM

Quote:

Originally Posted by Mitco39

I have no trouble covering the added cost of having to ship it up here

Thanks again for doing this.

Mitch

I will send you another paypal gift for $10 I am just happy you did this for us again

TerribleONE · 02-12-2013, 09:40 PM

how many left? Im in!

kellyefields · 02-13-2013, 03:32 AM

Quote:

Originally Posted by Mitco39

I have no trouble covering the added cost of having to ship it up here

Thanks again for doing this.

Mitch

Quote:

Originally Posted by LMBmikeZ

I will send you another paypal gift for $10 I am just happy you did this for us again

You guys did not have to do this but I do appreciate it, you should be getting your struts in about a week or so.

Quote:

Originally Posted by TerribleONE

how many left? Im in!

I have 7 right now.

wheee! · 02-13-2013, 09:40 AM

Quote:

Originally Posted by LMBmikeZ

I will send you another paypal gift for $10 I am just happy you did this for us again

damn rich Canadians showing off again...

dmhenderson · 02-13-2013, 09:59 AM

Some of the MD Z club people might want these (not MAZOC). I said I'd throw up an add on their site if you want to provide me with a video or something.

LMBmikeZ · 02-13-2013, 10:11 AM

Quote:

Originally Posted by wheee!

damn rich Canadians showing off again...

I wish I could say I was rich

I just don't want the guy to get the short end on this and end up paying out of pocket when he is already hooking us up

kellyefields · 02-13-2013, 11:08 AM

Quote:

Originally Posted by dmhenderson

Some of the MD Z club people might want these (not MAZOC). I said I'd throw up an add on their site if you want to provide me with a video or something.

It will be up friday for all to see.

MX52Z · 02-13-2013, 11:11 AM

Does the base of this kit (fender) require cutting the stock rubber seal like the Evo-R kit?

02-11-2013, 07:16 PM	#91 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	gurneyeagle thanks for the great guy post. I appreciate knowing that people appreciate me helping out. On to business. the parts arrived today and I quality checked them and they are the best yet. This new company did right by us. I have made the small modification needed to bolt the bracket to the hood and they are all packed up in the back of the wifes car ready for her to take them to the post office tomorrow. she will get a delivery confirmation number I will be able to send to those in the us. Sorry for the Canada folks they dont do delivery confirmation but I will put in paypal that they have shipped and add the delivery confirmation number for in the US. I currently have 8 sets left ready to ship when orders are placed so if you are interested you will get them within a week depending on where you are located. Even though I provide a detailed install sheet I will also be doing another install video with CHPT11 this friday and will post it here for all to see. He has a new 2013 and this will be the first time the hood struts will be going on so you will be able to see how it is done and will be walked through any steps to correct any problems if they occur. I will do one side and turn it over to him so you can see that this can be done by anyone that gets this. Also of note if you have any issues you can always PM me and I will send you my phone number and I will help you dignose any issues which with this set I do not forsee any issues with from what I can tell from checking these struts. Again I only have 8 sets remaining and since I front the cost of these I cannot do another build until I have at least 10 committed buyers and with that comes a longer wait. gurneyeagle, MarkGideon and Mitco39 like this. __________________ MY 2009 SC BUILD.

02-11-2013, 07:18 PM	#92 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Woot Woot! __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

02-12-2013, 07:01 PM	#96 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	Have 7 sets left. Due to shipping costs to canada going up all orders from here on out shipped out of the us would be 110 plus paypal fees. I will eat the cost for those that have already ordered but from here on out I must charge what it costs me to ship them. all orders placed by yesterday shipped today. Another shipping day will be this thrusday. __________________ MY 2009 SC BUILD.

02-12-2013, 07:41 PM	#97 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	I have no trouble covering the added cost of having to ship it up here Thanks again for doing this. Mitch __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

02-12-2013, 09:40 PM	#99 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5851	how many left? Im in! __________________ 638WHP 541WTQ @ 13.5PSI Build thread

02-12-2013, 07:28 AM	#95 (permalink)
Rocket Base Member Join Date: Aug 2010 Location: Edmonton, AB Posts: 33 Drives: 2010 370Z 40th M6 Rep Power: 15	PM Sent.

02-13-2013, 09:59 AM	#102 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 27	Some of the MD Z club people might want these (not MAZOC). I said I'd throw up an add on their site if you want to provide me with a video or something. kellyefields likes this. __________________

02-13-2013, 11:11 AM	#105 (permalink)
MX52Z Enthusiast Member Join Date: Dec 2012 Location: Port Charlotte, FL Posts: 471 Drives: Z'less por ahora Rep Power: 13	Does the base of this kit (fender) require cutting the stock rubber seal like the Evo-R kit?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evo-R Hood Damper Install	Stealth36	Exterior & Interior	10	06-29-2013 07:11 PM
The Z Store - CF hood damper kit	whittier	Nissan 370Z Roadster (Convertible)	3	01-25-2013 08:17 AM
hood damper kit??? where?	boomboom	Exterior & Interior	4	08-22-2012 06:19 PM
FS: Prosport CF Hood damper set with bracket	kenchan	Parts for sale (Private Classifieds)	14	08-27-2010 12:12 AM