B pillar / Rear window delete & Front bumper CF trim

SpawnAeroJohn · 06-22-2009, 02:15 AM

Are you speaking of the panel that goes from the top of the fender / hood over the door and meets up with the quarter panel? If so we have had ideas to do those. But depending on how much time we have left over with bullittes car, we may or may not be able to do those with in the next 2 weeks. But if we can get a Z here after those 2 weeks for another product build then we can do them. Product build meaning a lip kit or such.

Boost_lee · 06-22-2009, 03:33 AM

I believe he (jmlenz) is speaking of the same B pillar piece that you have highlighted

I borrowed this pic from 2theextreme to illustrate

The b pillar piece is fixed to the vehicle and is not part of the door assembly. If it was one piece, then it would possibly flow smoother than a 2 piece design (for those who want a rear window delete)

jmlenz · 06-22-2009, 09:30 PM

Quote:

Originally Posted by Boost_lee

I believe he (jmlenz) is speaking of the same B pillar piece that you have highlighted

I borrowed this pic from 2theextreme to illustrate

The b pillar piece is fixed to the vehicle and is not part of the door assembly. If it was one piece, then it would possibly flow smoother than a 2 piece design (for those who want a rear window delete)

EXACTLY what boost-lee said ^^^ It would look great if you made a one piece CF panel (ideally that replaced the rear quarter window) for this area. It would flow better and the damn side window is useless anyways! Imagine your highlighted area in the OP but in 1 large piece-

06-22-2009, 03:33 AM	#2 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 31	I believe he (jmlenz) is speaking of the same B pillar piece that you have highlighted I borrowed this pic from 2theextreme to illustrate The b pillar piece is fixed to the vehicle and is not part of the door assembly. If it was one piece, then it would possibly flow smoother than a 2 piece design (for those who want a rear window delete) Last edited by Boost_lee; 06-22-2009 at 03:37 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Front Bumper Removal	DIGItonium	DIY Section (Do-It-Yourself)	98	10-19-2022 08:48 AM
Holes in Front Bumper? Question about License Plate Holder	YoungTurk	Nissan 370Z General Discussions	36	01-20-2012 06:22 AM
REQUEST: Front Bumper Removal	Cyberium	DIY Section (Do-It-Yourself)	15	07-18-2010 01:43 PM
rear glass window wiper	joeyz10	Nissan 370Z General Discussions	8	03-17-2009 08:39 PM
Rear Bumper Question	smurfblu13	Exterior & Interior	25	02-12-2009 06:49 AM

06-22-2009, 02:15 AM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 19	Are you speaking of the panel that goes from the top of the fender / hood over the door and meets up with the quarter panel? If so we have had ideas to do those. But depending on how much time we have left over with bullittes car, we may or may not be able to do those with in the next 2 weeks. But if we can get a Z here after those 2 weeks for another product build then we can do them. Product build meaning a lip kit or such.