B pillar / Rear window delete & Front bumper CF trim

SpawnAeroJohn · 06-14-2009, 11:02 PM

We are proud to present more ideas for the 370Z for those who dont fancy our first thread :P

May I present to you! (drum roll)

B pillar + Rear window delete CF overlays

These would run between $300 - 350 since the rear would be double sided carbon.

(The rear window delete one will be made so that it can be swapped with the window instead of being used as an overlay and will have both sides of the panel finished with a beautiful layer of CF so from the inside you see CF as well)

The area highlighted in red is where the CF would be placed.

http://www.japanesesportcars.com/pho...llar-cover.jpg

And here is a picture of the B pillars installed from another company. Just to show you what they look like.

And the next product would be a CF overlay panel that goes right over the license plate area. IMO it would be a great highlight.

These would run around $200

High quality UV resistant parts with a life time warranty

bullitt5897 · 06-15-2009, 07:03 AM

Add me down for the B pillar but no rear window cover...

1.bullitt5897 - b pillar only + front license plate cover
2.
3.
4.
5.

jmlenz · 06-21-2009, 12:59 AM

any possibility to make a one peice B-pillar/side window delete? That would be amazing in my opinion!

SpawnAeroJohn · 06-21-2009, 01:29 AM

It is possible but then when you open the door the window portion would also open exposing the window.

jmlenz · 06-21-2009, 11:47 PM

^^^ not sure what you mean? The black plastic b-billar does not open with the door, both are fixed and static.

SpawnAeroJohn · 06-22-2009, 02:15 AM

Are you speaking of the panel that goes from the top of the fender / hood over the door and meets up with the quarter panel? If so we have had ideas to do those. But depending on how much time we have left over with bullittes car, we may or may not be able to do those with in the next 2 weeks. But if we can get a Z here after those 2 weeks for another product build then we can do them. Product build meaning a lip kit or such.

arcticreaver · 06-22-2009, 02:55 AM

i'm not getting the idea either....

Boost_lee · 06-22-2009, 03:33 AM

I believe he (jmlenz) is speaking of the same B pillar piece that you have highlighted

I borrowed this pic from 2theextreme to illustrate

The b pillar piece is fixed to the vehicle and is not part of the door assembly. If it was one piece, then it would possibly flow smoother than a 2 piece design (for those who want a rear window delete)

tonmed123 · 06-22-2009, 05:59 AM

Quote:

Originally Posted by bullitt5897

Add me down for the B pillar but no rear window cover...

1.bullitt5897 - b pillar only + front license plate cover
2.tonmed123-b pillar only + front license plate cover
3.
4.
5.

I really want some door handles and CF overlay for just the black trim on the mirros, too.

FuszNissan · 06-22-2009, 07:47 AM

I am down for a front license plate cover + bpillar+window cover

wstar · 06-22-2009, 10:35 AM

For those of us that care more about performance than looks, on the pieces you're making that allow deletion of existing parts, it would be helpful to know the weight savings (for example, the weight of the stock useless rear windows minus the weight of your CF replacement).

Also, can this stuff be painted? I really don't want a random piece of CF on my car. Black would fit in fine in that area.

SpawnAeroJohn · 06-22-2009, 11:02 AM

If you are looking for rear window deletes which we will offer in carbon fiber. They are paintable and can be painted by us as well for little extra. Way less than any other shop for sure.

Rear window deletes will be about $200 itself.

jmlenz · 06-22-2009, 09:30 PM

Quote:

Originally Posted by Boost_lee

I believe he (jmlenz) is speaking of the same B pillar piece that you have highlighted

I borrowed this pic from 2theextreme to illustrate

The b pillar piece is fixed to the vehicle and is not part of the door assembly. If it was one piece, then it would possibly flow smoother than a 2 piece design (for those who want a rear window delete)

EXACTLY what boost-lee said ^^^ It would look great if you made a one piece CF panel (ideally that replaced the rear quarter window) for this area. It would flow better and the damn side window is useless anyways! Imagine your highlighted area in the OP but in 1 large piece-

jmlenz · 06-22-2009, 09:31 PM

Originally Posted by bullitt5897
Add me down for the B pillar but no rear window cover...

1.bullitt5897 - b pillar only + front license plate cover
2.tonmed123-b pillar only + front license plate cover
3.jmlenz - b pillar + side window delete (ideally one piece!)
4.
5.

SpawnAeroJohn · 06-22-2009, 09:35 PM

AH I GOT IT OK! For some reason I believed that the B pillar was attatched to the front door.... Sorry for the confusion guys! B pillar with rear window delete will be available.

06-14-2009, 11:02 PM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 18	B pillar / Rear window delete & Front bumper CF trim We are proud to present more ideas for the 370Z for those who dont fancy our first thread :P May I present to you! (drum roll) B pillar + Rear window delete CF overlays These would run between $300 - 350 since the rear would be double sided carbon. (The rear window delete one will be made so that it can be swapped with the window instead of being used as an overlay and will have both sides of the panel finished with a beautiful layer of CF so from the inside you see CF as well) The area highlighted in red is where the CF would be placed. http://www.japanesesportcars.com/pho...llar-cover.jpg And here is a picture of the B pillars installed from another company. Just to show you what they look like. And the next product would be a CF overlay panel that goes right over the license plate area. IMO it would be a great highlight. These would run around $200 High quality UV resistant parts with a life time warranty

06-15-2009, 07:03 AM	#2 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Add me down for the B pillar but no rear window cover... 1.bullitt5897 - b pillar only + front license plate cover 2. 3. 4. 5. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-22-2009, 02:55 AM	#7 (permalink)
arcticreaver Track Member Join Date: Feb 2009 Location: Arcadia, CA Posts: 769 Drives: 2009 Z34 7AT PG Rep Power: 925	i'm not getting the idea either.... __________________ http://www.facebook.com/arcticreaver - FaceBook http://www.linkedin.com/pub/sam-yang/a/832/325 - LinkedIn Profile

06-22-2009, 03:33 AM	#8 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	I believe he (jmlenz) is speaking of the same B pillar piece that you have highlighted I borrowed this pic from 2theextreme to illustrate The b pillar piece is fixed to the vehicle and is not part of the door assembly. If it was one piece, then it would possibly flow smoother than a 2 piece design (for those who want a rear window delete) Last edited by Boost_lee; 06-22-2009 at 03:37 AM.

06-22-2009, 07:47 AM	#10 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 543	I am down for a front license plate cover + bpillar+window cover __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

06-21-2009, 12:59 AM	#3 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 644	any possibility to make a one peice B-pillar/side window delete? That would be amazing in my opinion!

06-21-2009, 01:29 AM	#4 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 18	It is possible but then when you open the door the window portion would also open exposing the window.

06-21-2009, 11:47 PM	#5 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 644	^^^ not sure what you mean? The black plastic b-billar does not open with the door, both are fixed and static.

06-22-2009, 02:15 AM	#6 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 18	Are you speaking of the panel that goes from the top of the fender / hood over the door and meets up with the quarter panel? If so we have had ideas to do those. But depending on how much time we have left over with bullittes car, we may or may not be able to do those with in the next 2 weeks. But if we can get a Z here after those 2 weeks for another product build then we can do them. Product build meaning a lip kit or such.

06-22-2009, 10:35 AM	#11 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	For those of us that care more about performance than looks, on the pieces you're making that allow deletion of existing parts, it would be helpful to know the weight savings (for example, the weight of the stock useless rear windows minus the weight of your CF replacement). Also, can this stuff be painted? I really don't want a random piece of CF on my car. Black would fit in fine in that area. __________________ 7AT Track Car! Journal thread / Car setup details

06-22-2009, 11:02 AM	#12 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 18	If you are looking for rear window deletes which we will offer in carbon fiber. They are paintable and can be painted by us as well for little extra. Way less than any other shop for sure. Rear window deletes will be about $200 itself.

06-22-2009, 09:31 PM	#14 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 644	Originally Posted by bullitt5897 Add me down for the B pillar but no rear window cover... 1.bullitt5897 - b pillar only + front license plate cover 2.tonmed123-b pillar only + front license plate cover 3.jmlenz - b pillar + side window delete (ideally one piece!) 4. 5.

06-22-2009, 09:35 PM	#15 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 18	AH I GOT IT OK! For some reason I believed that the B pillar was attatched to the front door.... Sorry for the confusion guys! B pillar with rear window delete will be available.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Front Bumper Removal	DIGItonium	DIY Section (Do-It-Yourself)	98	10-19-2022 08:48 AM
Holes in Front Bumper? Question about License Plate Holder	YoungTurk	Nissan 370Z General Discussions	36	01-20-2012 06:22 AM
REQUEST: Front Bumper Removal	Cyberium	DIY Section (Do-It-Yourself)	15	07-18-2010 01:43 PM
rear glass window wiper	joeyz10	Nissan 370Z General Discussions	8	03-17-2009 08:39 PM
Rear Bumper Question	smurfblu13	Exterior & Interior	25	02-12-2009 06:49 AM