Custom Lexan Cabin / Trunk Divider (Ferrari esque), pics inside

'10Anamoly · 12-06-2011, 05:16 PM

So I have another guy interested in buying these and I was wondering if there might be a few more left that were interested. The manufacturer offered me another $10 cut in labor costs for cutting the pieces which I can pass on to you all if we can get four more guys (5 total). At this price I am not making any money at all but I dont mind doing it for you all. If I can sell 8 I'll make about $30 so thats fine too.

This would be at $165 + shipping.

Lemme know if anyone else is interested!

NickBaragona · 02-20-2012, 02:26 PM

Has anybody tried this yet with the Zenclosure box?

'10Anamoly · 02-20-2012, 07:00 PM

Not that I have heard.

I have the development piece for sale still if anyone is interested. It is 3/8" thick and has all the hardware I tested install with. Will let it go for $110+ actual shipping in the USA. Let me know if you are interested, thanks!

bdavis89 · 02-21-2012, 09:59 PM

Where in GA are you? I may be interested. Whats the difference between the developmental piece and the production pieces? Can't get another 8 buyers?

'10Anamoly · 02-22-2012, 06:23 AM

Hey dude, I am in Atlanta. The development piece is the same material/shape/cut and everything, but its thicker than the production pieces were. The production pieces were 1/4", this one is 3/8" material. Still fits perfectly with no issues, we just chose the thinner material for production. We do not have eight more people who wanted them after I sold the first round or I would be happy to make more. For now, this is the last one available.

Lemme know if you are interested, thanks!

RoshDawg · 05-24-2012, 11:09 PM

So I just got around to installing mine. Could you take some pics of your mounting points? It's just not looking right with my setup and I think I'm doing something wrong. Also, unsure to why there is such a large gap on top of the glass. Could have easily fit better. Also getting a lot of glare. Any tips on making it work better?

'10Anamoly · 05-25-2012, 07:35 AM

I actually sold mine to a local buyer who really wanted one as I can have more made so I dont have pics at the moment. I sat the piece down on the metal crossbar and slid it back towards the top until it was tightly in place. The gap on the top is meant to be there to let some air through for proper door closing function.

RoshDawg · 08-02-2012, 01:23 PM

I tried installing this again. Damn I cant believe I wasted (and greatly over paid) so much money on this. The glass does not properly fit in any direction. Proper door closing function? Really...? It was my fault though for not asking for detailed close up pics to see truly how horrible this design was.
1. It should have been antireflective. When looking in my rear view mirror, its like looking at a whole other mirror during night time. Its constantly reflecting whats in front of me.
2. It should actually fit!! Oh my I can't stress this point enough. Theres a lot of space above it, and a tremendous amount of space on the sides. A true lexan divider blocks off everything from the back. How is road noise and drone reduced when the glass doesnt divide jack shi*? Oh, and doors close just fine when the trunk is divided from the cabin.
3. The tools and mounting is really truly a disgrace.
4. The price? I was one of the first to get this piece and paid the most. Almost $200 for a thin misshaped piece of lexan glass that doesn't fit??

The one good thing about this is the air circulation when the windows are down. I would probably pay $10-$20 for this.

Not trying to attack you personally Anamoly, just sharing my distaste for the crappy product you built and hyped up. That's not sarcastic, I really do not have anything against you, just your product.

'10Anamoly · 08-02-2012, 06:24 PM

If you would have pinged me with some diplomatic questions about the install and fit, I would have been more than happy to help you. I posted pics previously of the unit installed with a great fit on my car and your piece was cut to the same exact CNC spec as mine. Ragging on a piece that you need the sellers help with is not the way to go. I only made about $10 per piece and I thought the community would like these which is the only reason I went to the effort. I guess it is remember sometimes how rude someone can be after hard work though. I am sorry that you did not get what you were looking for, but I am not sorry that you lack manners or any sense of maturity.

Have a nice life Rosh.

Pic9148 · 04-08-2019, 08:07 AM

I now you posted this a while ago .Are you still providing theses divisions?

cooltoy · 04-08-2019, 10:58 AM

He has not logged in since 2017.

Pic9148 · 04-09-2019, 06:52 AM

Thanks

12-06-2011, 05:16 PM	#76 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 15	So I have another guy interested in buying these and I was wondering if there might be a few more left that were interested. The manufacturer offered me another $10 cut in labor costs for cutting the pieces which I can pass on to you all if we can get four more guys (5 total). At this price I am not making any money at all but I dont mind doing it for you all. If I can sell 8 I'll make about $30 so thats fine too. This would be at $165 + shipping. Lemme know if anyone else is interested! __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

02-20-2012, 07:00 PM	#78 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 15	Not that I have heard. I have the development piece for sale still if anyone is interested. It is 3/8" thick and has all the hardware I tested install with. Will let it go for $110+ actual shipping in the USA. Let me know if you are interested, thanks! __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

02-21-2012, 09:59 PM	#79 (permalink)
bdavis89 Track Member Join Date: Oct 2011 Location: Jacksonville FL Posts: 586 Drives: '10 370Z PW Auto Rep Power: 14	Where in GA are you? I may be interested. Whats the difference between the developmental piece and the production pieces? Can't get another 8 buyers? __________________ 2010 Pearl White Touring Sport Package \| Navigation \| 7 Speed Automatic

02-22-2012, 06:23 AM	#80 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 15	Hey dude, I am in Atlanta. The development piece is the same material/shape/cut and everything, but its thicker than the production pieces were. The production pieces were 1/4", this one is 3/8" material. Still fits perfectly with no issues, we just chose the thinner material for production. We do not have eight more people who wanted them after I sold the first round or I would be happy to make more. For now, this is the last one available. Lemme know if you are interested, thanks! __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

05-24-2012, 11:09 PM	#81 (permalink)
RoshDawg Track Member Join Date: May 2011 Location: NM / CA Posts: 981 Drives: '13 911 C2S Rep Power: 14	So I just got around to installing mine. Could you take some pics of your mounting points? It's just not looking right with my setup and I think I'm doing something wrong. Also, unsure to why there is such a large gap on top of the glass. Could have easily fit better. Also getting a lot of glare. Any tips on making it work better? __________________ \| EVO X MR \| '11 WRX STI \| 370Z SPRT \| 911 (991) C2S \|

02-20-2012, 02:26 PM	#77 (permalink)
NickBaragona Enthusiast Member Join Date: Jun 2011 Location: Maryland Posts: 353 Drives: 40th 370Z Rep Power: 13	Has anybody tried this yet with the Zenclosure box?

05-25-2012, 07:35 AM	#82 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 15	I actually sold mine to a local buyer who really wanted one as I can have more made so I dont have pics at the moment. I sat the piece down on the metal crossbar and slid it back towards the top until it was tightly in place. The gap on the top is meant to be there to let some air through for proper door closing function. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

08-02-2012, 01:23 PM	#83 (permalink)
RoshDawg Track Member Join Date: May 2011 Location: NM / CA Posts: 981 Drives: '13 911 C2S Rep Power: 14	I tried installing this again. Damn I cant believe I wasted (and greatly over paid) so much money on this. The glass does not properly fit in any direction. Proper door closing function? Really...? It was my fault though for not asking for detailed close up pics to see truly how horrible this design was. 1. It should have been antireflective. When looking in my rear view mirror, its like looking at a whole other mirror during night time. Its constantly reflecting whats in front of me. 2. It should actually fit!! Oh my I can't stress this point enough. Theres a lot of space above it, and a tremendous amount of space on the sides. A true lexan divider blocks off everything from the back. How is road noise and drone reduced when the glass doesnt divide jack shi*? Oh, and doors close just fine when the trunk is divided from the cabin. 3. The tools and mounting is really truly a disgrace. 4. The price? I was one of the first to get this piece and paid the most. Almost $200 for a thin misshaped piece of lexan glass that doesn't fit?? The one good thing about this is the air circulation when the windows are down. I would probably pay $10-$20 for this. Not trying to attack you personally Anamoly, just sharing my distaste for the crappy product you built and hyped up. That's not sarcastic, I really do not have anything against you, just your product. __________________ \| EVO X MR \| '11 WRX STI \| 370Z SPRT \| 911 (991) C2S \|

08-02-2012, 06:24 PM	#84 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 15	If you would have pinged me with some diplomatic questions about the install and fit, I would have been more than happy to help you. I posted pics previously of the unit installed with a great fit on my car and your piece was cut to the same exact CNC spec as mine. Ragging on a piece that you need the sellers help with is not the way to go. I only made about $10 per piece and I thought the community would like these which is the only reason I went to the effort. I guess it is remember sometimes how rude someone can be after hard work though. I am sorry that you did not get what you were looking for, but I am not sorry that you lack manners or any sense of maturity. Have a nice life Rosh. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd Last edited by '10Anamoly; 08-02-2012 at 06:28 PM.

04-08-2019, 08:07 AM	#85 (permalink)
Pic9148 Base Member Join Date: Jan 2012 Location: Shelton,CT Posts: 49 Drives: 2009 370Z Sport Auto Rep Power: 13	I now you posted this a while ago .Are you still providing theses divisions?

04-08-2019, 10:58 AM	#86 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,937 Drives: 14 PW 370Z S/T MT Rep Power: 240204	He has not logged in since 2017. Boomzig likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-09-2019, 06:52 AM	#87 (permalink)
Pic9148 Base Member Join Date: Jan 2012 Location: Shelton,CT Posts: 49 Drives: 2009 370Z Sport Auto Rep Power: 13	Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Detailer's Domain and a Ferrari 458 - 40 hours - 160 + pics	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	5	10-04-2011 11:45 PM
GT Motoring - custom tow hook finshing pics, Custom finishes now available	GT Motoring	Exterior & Interior	45	09-05-2010 03:31 AM
Running wires from trunk to cabin	axeman71	Nissan 370Z Roadster (Convertible)	1	07-01-2010 01:08 PM
Need Help: Glueing Felt onto Lexan (Polycarbonate Plastic)	labk888	The Lounge (Off Topic)	0	05-16-2010 02:08 AM
Nissan 370z custom rally hood and trunk graphic decals	kdo2milger	Exterior & Interior	20	03-02-2009 04:44 AM