Yes it peels like a sheet of rubber look it up on you tube,plastidipyourcar.com

I was talking to a customer last week and he said that the Canadian Plastidip is different than the american stuff. Not sure if this is true or not, he said he even tried to order some up from the US but it got turned around at the boarder.

Anyone every hear of this before?

I say Bull****, it's almost 10 days now lol keke

PlastiDip is a hazardous chemical so I could certainly believe it. The wonderful state of California will not allow full gallons of PlastiDip to be shipped to their residents.

Thanks to this mid March snowfall today, the Z project must be put on hold. I do not have garage space right now, so yeah....I'm a little pissed.

That looks really good! Did u have to sand the surface prior to spraying?

you dont have to sand with plastidip

anyone do the front fangs? I wonder if i need to take off the whole thing because the radiator is right behind it...ty & cheers!

Yes. Search is your friend. IIRC, no need to remove bumper cover, they just used some paper to keep overspray off the radiator.

I did mine. Just put newspaper or what ever you find to cover the sides for over spray.

Sent from my SPH-L710 using Tapatalk 2

Rear wing and other little parts.

Sent from my SPH-L710 using Tapatalk 2

Did you screw your spoiler down? Or just use the 3m tape?

I don't get your question? If what your asking me is how I installed the rear wing the answer would be I did not. That is the wing that comes with the sports package. And I believe it uses 3m tape because I can't see any screws over the top.

Sent from my SPH-L710 using Tapatalk 2

I didn't realize you had a sport package. Those are installed with 2 screws and 3M tape..

I have a base and just put mine on & dipped it black. My bad!

no problem.

Sent from my SPH-L710 using Tapatalk 2

black headlight housing would be the killing blow on your car dude, nice pics!

I just did my wheels just for the heck of it haha
Attachment 65556
Attachment 65557
Attachment 65558

That thing is bad to the bone.

Do the handles and the side turn markers next!

You can even put a thin layer over your tails and side markers on the headlights. (Check my build for pics)

ALL Yellow & Black. :)

i love the way the license plate area came out. pure awesome, i may have to do this.

Beautiful car! :tup:

Love that plasti dip
http://i1308.photobucket.com/albums/...ps490ec4f2.jpg

Plasti dip wheel just to see if i would like it,now getting powder coated
http://i1308.photobucket.com/albums/...ps58177e65.jpg
http://i1308.photobucket.com/albums/...ps9985bd78.jpg

High pressure wash and it still looks great lol
Attachment 65870

I gave you a teaser a few weeks ago, finally I have completed the project. Please don't wet your pants!
http://farm9.staticflickr.com/8519/8...c1b95fdb2f.jpg
IMG_0350 by DufDaddy17, on Flickr

http://farm9.staticflickr.com/8381/8...bde53c98d3.jpg
IMG_0349 by DufDaddy17, on Flickr

http://farm9.staticflickr.com/8248/8...285fbdf566.jpg
IMG_0345 by DufDaddy17, on Flickr

Looks great duff! The blue from the curb is throwing off the color a bit, but it look like it turned out real smooth and exactly what you wanted. I anticipated a little more gloss however--

Now you need to get your hands on some wheel spacers and maybe some springs!

Thanks Nick, it probably isn't helping that it is a dreary, rainy day....no sunshine to make it sparkle

http://www.the370z.com/diy-section-d...ml#post2288169

Attachment 67933Attachment 67934
First time using the plasti dip..tomorrow the wheels :)

Attachment 68005
Why does it make bubbles???? It's the second time!!

LOL- Did you wash the wheels before you sprayed them?

Sometimes if you wash them, water gets into the lug holes and then gets trapped under the dip.

I always have to wipe the wheels off with a towel first and make sure they are 100% dry.

Looks like there was some cleaning solution or water that got trapped under.

A way to fix this is get a small needle or thumbtack & pop the hole. Then do a respray over that spot. Pretty easy!

Nice Vid. I did mine this past weekend and am really pleased with the look. I'll be doing my wheels in a few weeks. I really like the blacked out emblems, but now my wheels are screaming to be matched.

Oh yes probably it wasn't dry enough :/ but luckily it was only one wheel and I will try to do that quick fix..hopefully it won't look weird and still match the rest of the wheel. I love the new look thou :)
Attachment 68027

Did my rims, door handles, rear diffuser, and front.

http://i241.photobucket.com/albums/f...526_180832.jpg

http://i241.photobucket.com/albums/f...518_172610.jpg

http://i241.photobucket.com/albums/f...518_172432.jpg

I went to the track and ran many sessions and the plasti dip didn't come off the rims. I was surprised. I just saw on their web page that plasti dip is proven to hold up to 310 Farenheith or something like that. Anyways if someone is wondering. It will hold up at the track.

See a nice pic, click on it and its photobucket. I hate photobucket argg lol

Jajajja. True

Looks good!! Kinda reminds me of mine!!

Sent from my SPH-L710 using Tapatalk 2

Did the bottom line around the car like the 2014 model......... Will be doing the top of the spoiler as well.

http://i1261.photobucket.com/albums/...ps411c9876.jpg

http://i1261.photobucket.com/albums/...ps3b42d3f5.jpg

http://i1261.photobucket.com/albums/...psab0c265a.jpg

Thanks for those pics Kristina. I have been thinking about doing the same to my 2011 just have not had time to do it yet. Not 100% sure I will like it on my car but its plastidip so can remove it quickly.