AERO JACKET Type III wing

KaienZ34 · 03-29-2011, 08:22 PM

Quote:

Originally Posted by XwChriswX

It wouldn't come out right if you cut the CF to square it. You're gonna have a nice hole.

With the CF, i would not want it to be done after me receiving it. Must be done by rick before shipping.

NewYorkJon34 · 03-29-2011, 10:10 PM

So im guessing you'll have pics by tomorrow or thursday

Junior370z · 03-29-2011, 10:15 PM

I just got off the phone with him. He wanted me to go there tomorrow to color match it but I'll be on duty. I'll be heading up there Thursday so he can match it. Clear coat Friday, then pick it up Saturday.

KaienZ34 · 03-29-2011, 10:20 PM

Quote:

Originally Posted by Junior370z

I just got off the phone with him. He wanted me to go there tomorrow to color match it but I'll be on duty. I'll be heading up there Thursday so he can match it. Clear coat Friday, then pick it up Saturday.

cool deal yo

Fly1 Motorsports · 03-29-2011, 11:15 PM

Quote:

Originally Posted by Junior370z

I just got off the phone with him. He wanted me to go there tomorrow to color match it but I'll be on duty. I'll be heading up there Thursday so he can match it. Clear coat Friday, then pick it up Saturday.

Awesome! It's gonna look great!!

batman_4 · 03-29-2011, 11:19 PM

is there any chance we could get actual straight side shots?? all these shots keep us from seeing how far back it actually extends.....a big factor IMO.

those new pics make the wing look hot again....sway me back to getting one.

Junior370z · 03-29-2011, 11:41 PM

Quote:

Originally Posted by batman_4

is there any chance we could get actual straight side shots?? all these shots keep us from seeing how far back it actually extends.....a big factor IMO.

those new pics make the wing look hot again....sway me back to getting one.

It lines up to about the edge of the hatch.

VIP-STATUS · 03-30-2011, 11:51 AM

Quote:

Originally Posted by batman_4

is there any chance we could get actual straight side shots?? all these shots keep us from seeing how far back it actually extends.....a big factor IMO.

those new pics make the wing look hot again....sway me back to getting one.

FairladyZ10PG · 03-31-2011, 06:06 PM

Quote:

Originally Posted by VIP-STATUS

Where are the new fenders?

Bluebatmobile · 03-30-2011, 04:37 PM

Now thats one B@tass Wing

!

B@t

christian370z · 03-31-2011, 09:27 PM

^I would second this, if that is possible it would be perfection. I would buy that version if it ever gets made.

Junior370z · 04-01-2011, 11:43 PM

Here's all the holes when you remove the oem spoiler if anyone want to know. It was a PAIN taking it off!
The holes don't really match Ricks wing because it is aftermarket, but you will notice Ricks wing has evidence it was molded off a factory wing base. Depending on if you want to use the mount holes on Ricks wing, you'll have too drill 2 holes, one on each end. I will be trying to use the factory holes on the hatch and double stick tape the ends like the factory. Since the factory was pretty hard to remove I'm sure it shouldn't be a problem. I'll start the install in the morning. I'll take pics when I'm finished.

Here is Ricks wing. Awesome! Can't wait to put the mofo on!

KaienZ34 · 04-02-2011, 12:21 PM

Quote:

Originally Posted by Junior370z

Here's all the holes when you remove the oem spoiler if anyone want to know. It was a PAIN taking it off!
The holes don't really match Ricks wing because it is aftermarket, but you will notice Ricks wing has evidence it was molded off a factory wing base. Depending on if you want to use the mount holes on Ricks wing, you'll have too drill 2 holes, one on each end. I will be trying to use the factory holes on the hatch and double stick tape the ends like the factory. Since the factory was pretty hard to remove I'm sure it shouldn't be a problem. I'll start the install in the morning. I'll take pics when I'm finished.
Here is Ricks wing. Awesome! Can't wait to put the mofo on!

So rick's wing ues the stock holes, but you need to either drill two new ones or just 3m double stick tape the two spots? Do the rest of the holes line up and are they usable?

KaienZ34 · 04-02-2011, 02:03 PM

Quote:

Originally Posted by KaienZ34

So rick's wing ues the stock holes, but you need to either drill two new ones or just 3m double stick tape the two spots? Do the rest of the holes line up and are they usable?

Maybe this^ is a question for Rick.

Junior370z · 04-02-2011, 02:14 PM

Quote:

Originally Posted by KaienZ34

So rick's wing ues the stock holes, but you need to either drill two new ones or just 3m double stick tape the two spots? Do the rest of the holes line up and are they usable?

You can tell where the holes were from the mold. What I did was use the stock clips and used epoxy to mount them on the wing after drilling holes for them on the wing. I didn't want to drill holes in my hatch for the bolt anchors toward the end of the wing.
I was so into trying to get the wing mounted I forgot to take pics of how I did it.

Anyways here's some pics of the color matched wing!

And finally the rear view mirror shot lol!

03-29-2011, 10:15 PM	#3 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 51 Posts: 1,024 Drives: over the speed limit Rep Power: 295	I just got off the phone with him. He wanted me to go there tomorrow to color match it but I'll be on duty. I'll be heading up there Thursday so he can match it. Clear coat Friday, then pick it up Saturday. __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold

03-29-2011, 11:19 PM	#6 (permalink)
batman_4 A True Z Fanatic Join Date: Dec 2008 Location: McAllen Tx. Posts: 1,038 Drives: '09 PW 370Z Rep Power: 369	is there any chance we could get actual straight side shots?? all these shots keep us from seeing how far back it actually extends.....a big factor IMO. those new pics make the wing look hot again....sway me back to getting one. __________________ '09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE

03-30-2011, 04:37 PM	#10 (permalink)
Bluebatmobile The370Z.com Vendor Join Date: Nov 2008 Location: San Diego Posts: 934 Drives: 1997 Acura NSX Rep Power: 19	Now thats one B@tass Wing ! B@t __________________ email: bluebatmobile@san.rr.com custom vinyl overlays: WWW.BLUEBATOVERLAYS.COM facebook:https://www.facebook.com/groups/bluebatoverlays/ @bluebatoverlays on IG

03-31-2011, 09:27 PM	#11 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 433	^I would second this, if that is possible it would be perfection. I would buy that version if it ever gets made. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

04-01-2011, 11:43 PM	#12 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 51 Posts: 1,024 Drives: over the speed limit Rep Power: 295	Here's all the holes when you remove the oem spoiler if anyone want to know. It was a PAIN taking it off! The holes don't really match Ricks wing because it is aftermarket, but you will notice Ricks wing has evidence it was molded off a factory wing base. Depending on if you want to use the mount holes on Ricks wing, you'll have too drill 2 holes, one on each end. I will be trying to use the factory holes on the hatch and double stick tape the ends like the factory. Since the factory was pretty hard to remove I'm sure it shouldn't be a problem. I'll start the install in the morning. I'll take pics when I'm finished. Here is Ricks wing. Awesome! Can't wait to put the mofo on! __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold Last edited by Junior370z; 04-01-2011 at 11:54 PM.

03-29-2011, 10:10 PM	#2 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1066	So im guessing you'll have pics by tomorrow or thursday

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AERO JACKET Type I + Type II wing	VIP-STATUS	Body Interior/Exterior	35	01-30-2012 02:50 AM
Amuse Wing or Mines Wing Add on	Calvin	Exterior & Interior	54	11-13-2011 09:39 PM
Gallardo Type Wing	Joebarchuck	Exterior & Interior	15	08-22-2011 10:17 AM
Aero Jacket?	Stix	Exterior & Interior	2	11-20-2010 09:52 PM