Fujimura Auto Carbon Z34 Diffuser!

Knives · 09-06-2010, 08:39 PM

Quote:

Originally Posted by 370Z JT

^pretty sick man. I like the CF wing. Saving the loot.

Thanks man. Pretty happy with the turnout.

CF wing is a good investment, quality is solid plus since you already have the holes drilled from the sports pkg spoiler, it should be a quick install.

base64 · 09-06-2010, 09:14 PM

Thanks for the link I'm definitely going to pick up one of these

370zee · 09-08-2010, 10:27 PM

Guys quick question...
i got my diffuser, put it on, and a few days later the right side has a SLIGHT sag/gap at the top (not noticable unless you know its there and really look for it).
because i'm really anal with stuff like this (even though nobody can see it) it is really frustrating me..

i am wondering - is this normal? ie is it a fujimura defect on the diffuser?

or did i not apply tape/pressure in that area and therefore thats what has happened?

If it is my fault, CAN i remove the diffuser (unbolt it) and re-do it? or once its on with the 3M VHB tape, its pretty much game over?

i've attached a pic (used Knives pic and just circled the spot where it is).

Any feedback would be great.. I hope its my fault and that i can remove it and re-do it again!

Thx

kenchan · 09-08-2010, 10:52 PM

yah, remove it and redo the tape, double up at the top with 3M VHB.

also your exhaust tips are awefully close to the diffuser... might want to get some washers and lower that exhaust a notch.

Knives · 09-08-2010, 11:04 PM

Quote:

Originally Posted by kenchan

yah, remove it and redo the tape, double up at the top with 3M VHB.

also your exhaust tips are awefully close to the diffuser... might want to get some washers and lower that exhaust a notch.

Yea, I'm kinda watching the situation. I have a couple of millimeters of clearance, but I'll prob lower the exhaust a tad when I finally get off my @ss and install my sway bars.

370zee · 09-08-2010, 11:10 PM

so when removing it, the tape wont be that strong that it will require alot of force to pry off (and possibly risk busting the diffuser (since it lightweight/fragile)?
i guess i should re-rub the area on the car again with rubbing alcohol to remove any of the VHM tape residue?

when u say double up at the top with the vhb tape, do you mean to put 2 strips side by side? or stack them ontop of each other to make them double the thickness?

sorry for the annoying questions.. just want to get it right =)

thanks for your quick response!

hehe thats knives car (i just pinched his pic to demonstrate where my issue is)
but i am getting the same exhaust so atleast i know i'll need to get the tips lowered a touch

Knives · 09-08-2010, 11:20 PM

Quote:

Originally Posted by 370zee

so when removing it, the tape wont be that strong that it will require alot of force to pry off (and possibly risk busting the diffuser (since it lightweight/fragile)?
i guess i should re-rub the area on the car again with rubbing alcohol to remove any of the VHM tape residue?

when u say double up at the top with the vhb tape, do you mean to put 2 strips side by side? or stack them ontop of each other to make them double the thickness?

sorry for the annoying questions.. just want to get it right =)

thanks for your quick response!

hehe thats knives car (i just pinched his pic to demonstrate where my issue is)
but i am getting the same exhaust so atleast i know i'll need to get the tips lowered a touch

Yea, you're going to want to remove as much of the VHB residue as you can. I'm guessing after a couple of days, the VHB tape will leave some residue. If that's the case, just use mineral spirits and heat up the area with a hairdryer. The cleaner you make the area, the better the new tape will take hold.

And yes, he means stack two layers of VHB tape ontop of each other. It will make for better contact and will most likely resolve the "sag" issue you have.

370zee · 09-08-2010, 11:36 PM

cool sounds good.. going to do it when i get home tonight! just glad that it can be done.. its been eating at me..
oh well shouldn't take too long, since the holes have already been drilled on the bar etc..

thanks for your help guys!

Westwood · 10-15-2010, 09:20 AM

how much time does it take to get that diffuser? J at Evo R is not replying so im tired of waiting

kenchan · 10-15-2010, 10:10 AM

takes about 10 days. order from japanparts.com

Westwood · 10-15-2010, 11:18 AM

Quote:

Originally Posted by kenchan

takes about 10 days. order from japanparts.com

whats wrong with rhdjapan.com?

phelan · 10-15-2010, 11:20 AM

Quote:

Originally Posted by Westwood

whats wrong with rhdjapan.com?

PITA website lol

Westwood · 10-15-2010, 08:32 PM

hummm well i wanna buy from a safe seller and ion wanna wait a month.

KB2 · 10-24-2010, 06:14 PM

does anybody have this in the black version on their car???

JaredGraves · 01-15-2011, 04:13 AM

Installed mine today, Its about as easy any mod could possibly be to install, 15-20 minutes max. 99% happy with the fitment too. Fits WAY better than the EVO-R versions ive seen, so like others have mentioned, it's well worth the extra bucks.

10-15-2010, 09:20 AM	#99 (permalink)
Westwood Track Member Join Date: Feb 2010 Location: Ottawa,Canada Posts: 745 Drives: C63 AMG Rep Power: 16	how much time does it take to get that diffuser? J at Evo R is not replying so im tired of waiting __________________ Mods: Stillen G3 \| Stillen lightweight crank pulley \| Berk hfc's \| Top speed pro 1 CBE \| Jic Magic y pipe \| 20" Vossen 9.5/10.5 \| Megan Coilovers \| Smoked JDM tail lights \| Blacked out headlights \| Sprint booster \| Shine Auto CF Front/Rear lip kit \| Evor R CF Side blades,CF fang cover,CF Nose Audio: Kenwood Excelon DNX9960 \| JL 1000w \| JL 12W6v2

10-15-2010, 10:10 AM	#100 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	takes about 10 days. order from japanparts.com carlitos_370z likes this.

10-15-2010, 08:32 PM	#103 (permalink)
Westwood Track Member Join Date: Feb 2010 Location: Ottawa,Canada Posts: 745 Drives: C63 AMG Rep Power: 16	hummm well i wanna buy from a safe seller and ion wanna wait a month. __________________ Mods: Stillen G3 \| Stillen lightweight crank pulley \| Berk hfc's \| Top speed pro 1 CBE \| Jic Magic y pipe \| 20" Vossen 9.5/10.5 \| Megan Coilovers \| Smoked JDM tail lights \| Blacked out headlights \| Sprint booster \| Shine Auto CF Front/Rear lip kit \| Evor R CF Side blades,CF fang cover,CF Nose Audio: Kenwood Excelon DNX9960 \| JL 1000w \| JL 12W6v2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura lip	Junior370z	Exterior & Interior	22	12-30-2010 07:32 AM
Fujimura Auto 370Z Exhaust	AK370Z	Intake/Exhaust	12	07-15-2010 12:08 PM
Yellow 370Z from Fujimura auto / SSR Type C	The_Zed_car	Nissan 370Z General Discussions	3	06-25-2009 10:55 PM
Fujimura Auto 370z aero kit 4.24.09	AK370Z	Exterior & Interior	13	05-25-2009 09:07 PM
Fujimura Auto 370z Plan Full Aero Kit 01.04.09	AK370Z	Exterior & Interior	9	01-05-2009 01:49 AM

09-06-2010, 09:14 PM	#92 (permalink)
base64 Base Member Join Date: Jun 2010 Location: Los Angeles Posts: 89 Drives: 2010 370z Touring Rep Power: 14	Thanks for the link I'm definitely going to pick up one of these

09-08-2010, 10:52 PM	#94 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, remove it and redo the tape, double up at the top with 3M VHB. also your exhaust tips are awefully close to the diffuser... might want to get some washers and lower that exhaust a notch.

09-08-2010, 11:10 PM	#96 (permalink)
370zee Base Member Join Date: Apr 2010 Location: Australia Posts: 32 Drives: 370z 2009 Rep Power: 15	so when removing it, the tape wont be that strong that it will require alot of force to pry off (and possibly risk busting the diffuser (since it lightweight/fragile)? i guess i should re-rub the area on the car again with rubbing alcohol to remove any of the VHM tape residue? when u say double up at the top with the vhb tape, do you mean to put 2 strips side by side? or stack them ontop of each other to make them double the thickness? sorry for the annoying questions.. just want to get it right =) thanks for your quick response! hehe thats knives car (i just pinched his pic to demonstrate where my issue is) but i am getting the same exhaust so atleast i know i'll need to get the tips lowered a touch

09-08-2010, 11:36 PM	#98 (permalink)
370zee Base Member Join Date: Apr 2010 Location: Australia Posts: 32 Drives: 370z 2009 Rep Power: 15	cool sounds good.. going to do it when i get home tonight! just glad that it can be done.. its been eating at me.. oh well shouldn't take too long, since the holes have already been drilled on the bar etc.. thanks for your help guys!

10-24-2010, 06:14 PM	#104 (permalink)
KB2 Base Member Join Date: Apr 2010 Location: Illinois Posts: 243 Drives: 370z Rep Power: 15	does anybody have this in the black version on their car???

01-15-2011, 04:13 AM	#105 (permalink)
JaredGraves Base Member Join Date: Sep 2010 Location: Toowoomba, Australia Posts: 16 Drives: 10 370z white M6 Rep Power: 14	Installed mine today, Its about as easy any mod could possibly be to install, 15-20 minutes max. 99% happy with the fitment too. Fits WAY better than the EVO-R versions ive seen, so like others have mentioned, it's well worth the extra bucks.