Fujimura Auto Carbon Z34 Diffuser!

Knives

Had the diffuser sitting on my floor for a couple of weeks. Decided to not be lazy yesterday and finally put it on. Quick writeup and some pics below.

Pretty easy install. I used 3M VHB 4910 tape (the tape they give you is a joke). I mostly put the tape along the outer edges of the diffuser. Per Kenchan's suggestion, I let the tape settle to the diffuser in the sun before install. While that sat, I went to work removing the factory plastic clip under the read fog light. It honestly looks like an unassuming plastic clip, but don't be fooled, its a pain in the @ss. You need to use some force and good positioning. Once that was off, I carefully put on the diffuser (you don't want to be off and have to constantly adjust because the tape will stick fairly quickly). I screwed in the center with the screw and bolt they provided. I used my own black self-drilling screws for the sides, instead of the flat-point screws they provided.

Overall, I'm pretty pleased. Fitment and carbon fiber quality are pretty good. Letting the diffuser sit until work tomorrow morning to let the 3M tape cure. Anyway, posted some pics below. Oh, and I have the F.I. exhaust and it is a tight fit (maybe 2 millimeters) but there is no contact.

Attached Images

	Diffuser 2.jpg (50.8 KB, 183 views)
	Diffuser 1.jpg (74.1 KB, 146 views)
	Diffuser 4.jpg (63.3 KB, 125 views)
	Diffuser 3.jpg (62.1 KB, 155 views)

__________________
Mods list and pics Click