Using Jack Stand...where to contact point?

xxAGAVExx · 01-03-2013, 09:27 PM

Thanks for the info, I just got a jack and stands for christmas, and had my car up to paint my calipers.

Crazy Baby · 03-09-2013, 10:22 AM

I just put on the evo-r side blades.I used 2x10's to get the front up a couple inches so I could install them.My problem now is that the dealership says they can't get my car on any lift they have(even the GTR lift)so i'm going to make my own ramps from 2x12's.....and change my oil myself....thinking about carbon fiber rockers but i'm thinking they will be too low also....Car has been lowered also by the way.

01-03-2013, 09:27 PM	#1 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,037 Drives: 09 370Z BLK M6 Rep Power: 53926	Thanks for the info, I just got a jack and stands for christmas, and had my car up to paint my calipers. __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jack Stand Question	spearfish25	Nissan 370Z General Discussions	143	10-16-2015 11:30 AM
Rear jack point	speedworks	Intake/Exhaust	20	10-27-2010 09:36 AM
Jack Stands	Minicobra1	DIY Section (Do-It-Yourself)	19	03-07-2010 04:54 PM
Stand behind your car and push down on the hatch.	shesha	Nissan 370Z General Discussions	18	09-14-2009 03:57 AM
Dealership contact/updates after ordering a car	takimbe	Nissan 370Z Pricing / Ordering Discussions	13	04-03-2009 01:42 AM

03-09-2013, 10:22 AM	#2 (permalink)
Crazy Baby Base Member Join Date: Feb 2013 Location: Slainsville Posts: 3 Drives: 2010 PW 370z Rep Power: 14	I just put on the evo-r side blades.I used 2x10's to get the front up a couple inches so I could install them.My problem now is that the dealership says they can't get my car on any lift they have(even the GTR lift)so i'm going to make my own ramps from 2x12's.....and change my oil myself....thinking about carbon fiber rockers but i'm thinking they will be too low also....Car has been lowered also by the way.