Installing JDM rear fog light as a brake light

DeusExMaxima · 01-31-2022, 01:29 AM

Ok...I figured it out. This procedure is to hook up the JDM foglight as a brake light. It can be used to hook up the light as a running light too or whatever you wish. The key is that no external harness is necessary. It's already in the car.

The process is as follows:

1. Pull the trunk paneling away
2. Locate the wires going to the brake light assembly.
3. Pull back the electrical tape and expose the wires of both the subharness going to the rear and the wires running to the brake/tail light.
4. Dig in the harness and pull up the yellowish wire.
5. Cut the wire. This is the key since it runs to the BCM.
6. Join the yellowish wire to the green wire coming from the brake light. Either solder or butt connector.
7. Plug in your fog light to the oem connector.

You now have a 4th brake light without using an outside harness. The ground wire is already grounded. You don't even have to remove the tail light.

01-31-2022, 01:29 AM	#16 (permalink)
DeusExMaxima Base Member Join Date: Feb 2015 Location: Southern California Posts: 80 Drives: 2010 red roadster Rep Power: 6722	Ok...I figured it out. This procedure is to hook up the JDM foglight as a brake light. It can be used to hook up the light as a running light too or whatever you wish. The key is that no external harness is necessary. It's already in the car. The process is as follows: 1. Pull the trunk paneling away 2. Locate the wires going to the brake light assembly. 3. Pull back the electrical tape and expose the wires of both the subharness going to the rear and the wires running to the brake/tail light. 4. Dig in the harness and pull up the yellowish wire. 5. Cut the wire. This is the key since it runs to the BCM. 6. Join the yellowish wire to the green wire coming from the brake light. Either solder or butt connector. 7. Plug in your fog light to the oem connector. You now have a 4th brake light without using an outside harness. The ground wire is already grounded. You don't even have to remove the tail light. cooltoy likes this. Last edited by DeusExMaxima; 01-31-2022 at 01:34 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iJDMTOY Exclusive Nissan 370Z 3-in-1 LED Tail light, Brake light, Reverse Light	iJDMTOY	Body Interior/Exterior	84	10-04-2016 06:24 AM
iJDMTOY: Smoked Lens LED Rear Fog Light \| Brake Tail Reverse Light \| Exclusive!	iJDMTOY	Body Interior/Exterior	22	07-12-2016 03:12 PM
wiring rear fog light as brake light	Parrotguy	Nissan 370Z Roadster (Convertible)	12	09-03-2015 10:34 AM
Rear Foglight - Running light AND brake light	mbowler	Exterior & Interior	26	08-12-2014 06:37 PM
Anyone installed the rear fog light as a brake light on a roadster?	Lee123	DIY Section (Do-It-Yourself)	4	05-01-2010 07:53 PM