Coolerworx Shifter Assembly (Dealers)

BettyZ · 12-09-2020, 09:31 PM

Quote:

Originally Posted by redondoaveb

I could see how the insert could be a source of the rattle

I should clarify, I greased it after I inspected the bottom of the shifter. It was not previously greased.

redondoaveb · 12-09-2020, 10:23 PM

Quote:

Originally Posted by BettyZ

I should clarify, I greased it after I inspected the bottom of the shifter. It was not previously greased.

Does it fit tight up into the shifter?

BettyZ · 12-09-2020, 11:24 PM

Quote:

Originally Posted by redondoaveb

Does it fit tight up into the shifter?

It fit semi-snugly into the shifter before I lubed it up. There were no obvious-by-feel gapping issues. The insert slid smoothly into and out of the shifter without effort. When I put this hot mess all back together I'll grease up the bolt as well as the sides of the shifter where it mates with the linkage and we'll see if that calms it down.

And yes, all of the above statements are also relevant to any sex acts involving yall's wildly-varied yet equally disgusting perversions - looking at you, Mike/James aka the poor white man's version of Mike Jones.

Rusty · 12-10-2020, 03:50 AM

?

Quote:

Originally Posted by BettyZ

It fit semi-snugly into the shifter before I lubed it up. There were no obvious-by-feel gapping issues. The insert slid smoothly into and out of the shifter without effort. When I put this hot mess all back together I'll grease up the bolt as well as the sides of the shifter where it mates with the linkage and we'll see if that calms it down.

And yes, all of the above statements are also relevant to any sex acts involving yall's wildly-varied yet equally disgusting perversions - looking at you, Mike/James aka the poor white man's version of Mike Jones.

When you talk about Mike/James. You mean this?

Leingod · 12-10-2020, 07:05 AM

Quote:

Originally Posted by Rusty

?
When you talk about Mike/James. You mean this?

I learned it from you. I hear wind is the only sound you can make anymore.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 03:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 09:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 12:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 03:03 AM