STILLEN 370Z Urethane Fascia - Sneak Peek - In Development

TipsZ · 02-23-2010, 10:42 AM

Any update from Stillen on the development?

Josh@STILLEN · 02-23-2010, 11:16 AM

We should be running the first articles late this week, could potentially be shipping by the end of next week! Should have pricing soon.

jmlenz · 02-23-2010, 05:02 PM

^ thank god! lets get a group buy going Josh...I think there will be plenty of ppl looking to ditch the OEM bumper...

RCZ · 02-23-2010, 05:14 PM

ooh, Josh shoot me a PM or e-mail with more info please. I am about to get my front bumper repainted, maybe I'm better off holding off on that and getting your bumper installed and painted instead.

Mike · 02-23-2010, 05:17 PM

I already have the first one spoken for!!!!!!!

RCZ · 02-23-2010, 05:20 PM

hahaha, you deserve it after your little oops at VIR

TreyUT · 02-23-2010, 05:27 PM

Subscribed.........

Josh@STILLEN · 02-23-2010, 10:02 PM

Will do Raul.. let me see if I can nail down pricing and I'll get that info over to you ASAP..

RCZ · 02-24-2010, 11:19 AM

Thanks sir, appreciate it.

Does it come with a way to mount the oil cooler to the ducting? I thought I heard something about this a while back.

Kyle@STILLEN · 02-24-2010, 12:22 PM

We put A LOT of work into this kit guys!!!

First off, we wanted to make sure that the fascia did not cost an arm and a leg just to ship. So, we have made this a three piece kit. The top corners are flanged and can either be molded in or a small body line will appear under the headlights. We will be working on extremely detailed instructions and possibly an instructional DVD on how to do the molding pat. Either way it will be very secure.

Basically if we did not design the fascia this way it would have been required to be shipped truck freight and would cost an additional 200-300 dollars to ship and even more if the part was shipped to a residence. By making these small changes we are able to ship via Fedex ground service and drastically reduce the freight costs for you guys.

The molds are being cleaned right now and will be run late this week like Josh said.

RCZ- The additional oil cooler has been developed and we will have all of the bracketry ready very soon.

Caravanshaka · 02-24-2010, 12:23 PM

Quote:

Originally Posted by Kyle@STILLEN

We put A LOT of work into this kit guys!!!

First off, we wanted to make sure that the fascia did not cost an arm and a leg just to ship. So, we have made this a three piece kit. The top corners are flanged and can either be molded in or a small body line will appear under the headlights. We will be working on extremely detailed instructions and possibly an instructional DVD on how to do the molding pat. Either way it will be very secure.

Basically if we did not design the fascia this way it would have been required to be shipped truck freight and would cost an additional 200-300 dollars to ship and even more if the part was shipped to a residence. By making these small changes we are able to ship via Fedex ground service and drastically reduce the freight costs for you guys.

The molds are being cleaned right now and will be run late this week like Josh said.

RCZ- The additional oil cooler has been developed and we will have all of the bracketry ready very soon.

Pricing and final pictures yet?

jmlenz · 02-25-2010, 11:23 PM

Quote:

Originally Posted by Kyle@STILLEN

We put A LOT of work into this kit guys!!!

First off, we wanted to make sure that the fascia did not cost an arm and a leg just to ship. So, we have made this a three piece kit. The top corners are flanged and can either be molded in or a small body line will appear under the headlights. We will be working on extremely detailed instructions and possibly an instructional DVD on how to do the molding pat. Either way it will be very secure.

Basically if we did not design the fascia this way it would have been required to be shipped truck freight and would cost an additional 200-300 dollars to ship and even more if the part was shipped to a residence. By making these small changes we are able to ship via Fedex ground service and drastically reduce the freight costs for you guys.

The molds are being cleaned right now and will be run late this week like Josh said.

RCZ- The additional oil cooler has been developed and we will have all of the bracketry ready very soon.

Cant really visualize what your talking about Kyle...in for final pics and details!

Josh@STILLEN · 02-25-2010, 11:37 PM

If you look at the factory or STILLEN fascia, at the upper most points on either sides of the headlights, we'll have a new body line to ensure that the fascia can be shipped via FedEx instead of truck freight.

But we have a process, instructions and help for any body shop to easily mold that line away upon paint and installation, to have the clean look if desired.

Yes you'll have more info soon, and as you can see, guys will be jumping on this, and as always you'll get some good install and reviews. Internally we're very excited about the R&D that's been put into this fascia, and it's functionality..

Mike · 02-26-2010, 04:00 AM

Quote:

Originally Posted by Josh@STILLEN

If you look at the factory or STILLEN fascia, at the upper most points on either sides of the headlights, we'll have a new body line to ensure that the fascia can be shipped via FedEx instead of truck freight.

But we have a process, instructions and help for any body shop to easily mold that line away upon paint and installation, to have the clean look if desired.

Yes you'll have more info soon, and as you can see, guys will be jumping on this, and as always you'll get some good install and reviews. Internally we're very excited about the R&D that's been put into this fascia, and it's functionality..

My car goes into the bodyshop today, so hopefully, everything else will be done and it will be ready to paint immediately when the cover gets here.

Caravanshaka · 02-26-2010, 08:00 AM

Quote:

Originally Posted by Josh@STILLEN

If you look at the factory or STILLEN fascia, at the upper most points on either sides of the headlights, we'll have a new body line to ensure that the fascia can be shipped via FedEx instead of truck freight.

But we have a process, instructions and help for any body shop to easily mold that line away upon paint and installation, to have the clean look if desired.

Yes you'll have more info soon, and as you can see, guys will be jumping on this, and as always you'll get some good install and reviews. Internally we're very excited about the R&D that's been put into this fascia, and it's functionality..

I guess the problem with that is that a body shop is going to charge $200 or so to mold those in compared to the $200 or so in shipping to get the same product. Personally I'd rather see the full bumper made and not have to worry about body filler cracking later down the road from molding in those "extra" pieces.

02-23-2010, 10:42 AM	#1 (permalink)
TipsZ Track Member Join Date: Mar 2009 Location: Lithia, FL Age: 52 Posts: 552 Drives: 09 Nissan 370z CS M6 Rep Power: 187	Any update from Stillen on the development? __________________ Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics TipsZ journal

02-23-2010, 05:17 PM	#5 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2187	I already have the first one spoken for!!!!!!! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

02-24-2010, 11:19 AM	#9 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Thanks sir, appreciate it. Does it come with a way to mount the oil cooler to the ducting? I thought I heard something about this a while back. Last edited by RCZ; 02-24-2010 at 11:40 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
front fascia cost?	Snakes709	Nissan 370Z General Discussions	7	09-22-2009 07:15 AM
Sneak Peek, Carbon Fiber B-Pillars @ The 370ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	3	08-25-2009 05:21 PM
Sneak Peek, Carbon Fiber Door Sills @ The 370ZSOURCE!!!!!	Michael@TheZStore	Exterior & Interior	2	07-29-2009 03:58 PM
Going to sneak a peek at a 2010 Genesis Coupe in a few minutes!!!	iamtherhino	Other Vehicles	5	03-07-2009 10:08 AM

02-23-2010, 11:16 AM	#2 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 534	We should be running the first articles late this week, could potentially be shipping by the end of next week! Should have pricing soon.

02-23-2010, 05:02 PM	#3 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 644	^ thank god! lets get a group buy going Josh...I think there will be plenty of ppl looking to ditch the OEM bumper...

02-23-2010, 05:14 PM	#4 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	ooh, Josh shoot me a PM or e-mail with more info please. I am about to get my front bumper repainted, maybe I'm better off holding off on that and getting your bumper installed and painted instead.

02-23-2010, 05:20 PM	#6 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	hahaha, you deserve it after your little oops at VIR

02-23-2010, 05:27 PM	#7 (permalink)
TreyUT Base Member Join Date: Jan 2010 Location: Dallas Posts: 72 Drives: 2010 370Z BS Rep Power: 16	Subscribed.........

02-23-2010, 10:02 PM	#8 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 534	Will do Raul.. let me see if I can nail down pricing and I'll get that info over to you ASAP..

02-24-2010, 12:22 PM	#10 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 307	We put A LOT of work into this kit guys!!! First off, we wanted to make sure that the fascia did not cost an arm and a leg just to ship. So, we have made this a three piece kit. The top corners are flanged and can either be molded in or a small body line will appear under the headlights. We will be working on extremely detailed instructions and possibly an instructional DVD on how to do the molding pat. Either way it will be very secure. Basically if we did not design the fascia this way it would have been required to be shipped truck freight and would cost an additional 200-300 dollars to ship and even more if the part was shipped to a residence. By making these small changes we are able to ship via Fedex ground service and drastically reduce the freight costs for you guys. The molds are being cleaned right now and will be run late this week like Josh said. RCZ- The additional oil cooler has been developed and we will have all of the bracketry ready very soon.

02-25-2010, 11:37 PM	#13 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 534	If you look at the factory or STILLEN fascia, at the upper most points on either sides of the headlights, we'll have a new body line to ensure that the fascia can be shipped via FedEx instead of truck freight. But we have a process, instructions and help for any body shop to easily mold that line away upon paint and installation, to have the clean look if desired. Yes you'll have more info soon, and as you can see, guys will be jumping on this, and as always you'll get some good install and reviews. Internally we're very excited about the R&D that's been put into this fascia, and it's functionality..