Another Sticky Dash Issue

Spartan 1771

I finally got around to treating the entire dash with the Optimum Leather Protectant.

The driver's side was so dry and almost completely white, especially the section by the VDV control button. After several coats of the Optimum, everything looks great. I soaked a microfiber towel and wiped everything down at least 3 times. The ends of the dash that can only be seen when the doors are opened (by the venting between the dash and door) were also really bad. In those areas, I sprayed it on two of my finders and lightly rubbed it onto those surfaces. All of it dried nicely and doesn't feel sticky or wet at all. Of course I did all of this in my garage out of direct sunlight. I'm going to let the car sit in the garage for a few days and then I'll take it out for a drive in the hot sun. I let everyone how it performs after that drive.

Sent from my SM-G781U using Tapatalk

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...