Intere thread: STILLEN front lip spoiler

azn370z · 10-24-2009, 05:39 PM

How about photochopping so the top of the lip goes up and meets the crease?

rednek01 · 10-27-2009, 10:56 AM

Quote:

Originally Posted by RedZed34

Alright guys... how about this...

It's a clean and simple look! I would really like to see something like this made.

Thanks!

Red you nailed it! What a perfect front lip exactly how its supposed to be, nice and clean follows the lines of the car and doesn't disturb the front end appearance just simply enhances it! Major KUDOS!

Dustin@Z1 · 10-27-2009, 11:41 AM

Quote:

Originally Posted by rednek01

Red you nailed it! What a perfect front lip exactly how its supposed to be, nice and clean follows the lines of the car and doesn't disturb the front end appearance just simply enhances it! Major KUDOS!

Josh, are you guys looking into any splitters or canards for the 370Z yet?

I know Mike uses his car ALOT for track use, this lip and a nice clean adjustable front splitter would be awesome!

elmz · 10-28-2009, 08:37 PM

Quote:

Originally Posted by rednek01

Red you nailed it! What a perfect front lip exactly how its supposed to be, nice and clean follows the lines of the car and doesn't disturb the front end appearance just simply enhances it! Major KUDOS!

+1 My vote goes to this version. I really liked the Nismo front lip on my 350Z and this has the same clean finish look that I like.

VQinside · 11-22-2010, 08:27 PM

Quote:

Originally Posted by RedZed34

Alright guys... how about this...

It's a clean and simple look! I would really like to see something like this made.

Thanks!

I like this one better.
I've been looking for the most simply good looking lip but everything seems to be over the top for my taste.

HAHA I just realized how old this thread is!

chuckd05 · 11-22-2010, 09:41 PM

Quote:

Originally Posted by RedZed34

Alright guys... how about this...

It's a clean and simple look! I would really like to see something like this made.

Thanks!

this lip would sell amazingly well if they made it like this... by far the cleanest design yet..

stillen MAKE IT HAPPEN !!!!

no offense but this is much cleaner than the lips on the side...

Mike · 10-24-2009, 05:44 PM

If the vents are functional, I want them. If not, it looks better without. Not sure what their function would be though.

Osiris · 10-26-2009, 11:59 PM

I think you almost had the right combination, but not quite....personally i think it looks good when the red goes all the way to the bottom of lip on the two sides of the middle grill. For example, feast your eyes on my superior MS Paint skills:

But i think you get the idea...can someone redo this in photoshop?

Mike · 10-24-2009, 08:17 PM

I just want one that will provide downforce on the racetrack. Overall looks are really not important, but pretty is always better than ugly.

370Zsteve · 10-27-2009, 07:03 AM

Quote:

Originally Posted by Mike

I just want one that will provide downforce on the racetrack. Overall looks are really not important, but pretty is always better than ugly.

I think on the street they will be destroyed within weeks. At least that's what happened to me years ago with a lowered/modded Fiesta. These things belong on the track, imo.

They look really cool, Stillen! If the vents are functional, I say leave 'em in. Otherwise, Reds chop looked best.

simota1 · 10-25-2009, 09:12 PM

i really dont feel the holes guys im sorry...... i like the post above with all the pics... those lips look clean

NewlyIMPORTed · 10-25-2009, 09:20 PM

what does the black fangs have to do with the lip? just curious because if it comes to just the lip i like it without the holes with a matte black finish

Kyle@STILLEN · 10-26-2009, 11:35 AM

Hey Guys,

This would be a poly-urethane part. We would not be making one out of carbon fiber.

It looks like we're on a good track here and I appreciate all of your input on this!

Thank you very much!

tkindred · 10-27-2009, 12:08 AM

Quote:

Originally Posted by Kyle@STILLEN

Hey Guys,

This would be a poly-urethane part. We would not be making one out of carbon fiber.

It looks like we're on a good track here and I appreciate all of your input on this!

Thank you very much!

"poly-urethane" thank goodness. Finally!

RCZ · 10-26-2009, 11:59 AM

The top secret is my favorite by far. If only it didnt have the vents...

I like lips when they extend out a little bit...as that one does.

View Poll Results: Which Lip Spoiler do you like?
Option 1	53	42.40%
Option 2	8	6.40%
Option 3	29	23.20%
Option 4	7	5.60%
Looking for a lip spoiler but I don't like the look of this one.	28	22.40%
Voters: 125. You may not vote on this poll

10-24-2009, 05:44 PM	#7 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	If the vents are functional, I want them. If not, it looks better without. Not sure what their function would be though. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

10-24-2009, 08:17 PM	#9 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	I just want one that will provide downforce on the racetrack. Overall looks are really not important, but pretty is always better than ugly. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

10-25-2009, 09:12 PM	#11 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	i really dont feel the holes guys im sorry...... i like the post above with all the pics... those lips look clean __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How hard is it to remove front spoiler?	ENT-Z	Exterior & Interior	6	03-27-2012 06:50 PM
My Sport Package Z did nont come with the front spoiler...	kevr6	Nissan 370Z General Discussions	67	02-01-2011 09:01 PM
rivet size for front chin spoiler	mbz	Exterior & Interior	2	10-04-2009 07:34 PM
OEM 370z Front Chin Spoiler -new	007mead	Parts for sale (Private Classifieds)	3	08-18-2009 04:58 PM
FS: New Front Aero Lip Spoiler and Air Guides	DIGItonium	Parts for sale (Private Classifieds)	0	05-20-2009 06:25 PM

10-26-2009, 11:59 PM	#8 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 21	I think you almost had the right combination, but not quite....personally i think it looks good when the red goes all the way to the bottom of lip on the two sides of the middle grill. For example, feast your eyes on my superior MS Paint skills: But i think you get the idea...can someone redo this in photoshop?

10-25-2009, 09:20 PM	#12 (permalink)
NewlyIMPORTed A True Z Fanatic Join Date: May 2009 Location: Kennesaw, GA Posts: 1,109 Drives: 11 STI Sedan Rep Power: 20	what does the black fangs have to do with the lip? just curious because if it comes to just the lip i like it without the holes with a matte black finish

10-26-2009, 11:35 AM	#13 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 308	Hey Guys, This would be a poly-urethane part. We would not be making one out of carbon fiber. It looks like we're on a good track here and I appreciate all of your input on this! Thank you very much!

10-26-2009, 11:59 AM	#15 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1120	The top secret is my favorite by far. If only it didnt have the vents... I like lips when they extend out a little bit...as that one does.