Airbag Light after Racing Seats

MannyWiner · 04-22-2015, 11:24 PM

As many know, the airbag light flashes after putting in racing seats. I think the 350Z had a wiring harnness to correct the problem.

I know about the DIY thread for the airbag light after racing seat install. I'm just wondering if anyone know of a part to buy the simplify the process rather than use parts from my old seats. I would like to put old seats back in when I sell my car.

Any ideas?

JDM-JUNKIE · 04-23-2015, 12:15 AM

Sorry I don't have an answer for you, but I saw a little of your gray seats in another thread what make/model are they? Looked good from what little I saw

BGTV8 · 04-23-2015, 01:39 AM

Search is your friend ...................

enter the following to Google "the370z.com airbag light aftermarket seats"

and Google will take you here:

DIY: [How-To:] Racing Seat airbag light fix

Then you will see how to fix your problem ...

If you wish to "Reuse" the Nissan plug, then find a wrecker and get the plugs from seats out of a wrecked car ..... or purchase plugs from Nissan (won't be cheap though)

MannyWiner · 04-23-2015, 09:01 PM

Thank you. They are Status GT-X seat. I had the done in gunmetal grey and black, all suede leather.

As I say in my post, I know about and have read the DIY fix thread, asking if anyone know if a harness is being marketed. But I'm afraid it isn't being made. Sorry, just came from being a Mustang owner, a million mods for every little thing

.

JDM-JUNKIE · 04-24-2015, 07:21 PM

Nice!
I thought they might be Status but wasn't sure if anybody else was offering gray seats like those, thanks for the info.

mag_black · 04-24-2015, 07:55 PM

Quote:

Originally Posted by MannyWiner

Thank you. They are Status GT-X seat. I had the done in gunmetal grey and black, all suede leather.

As I say in my post, I know about and have read the DIY fix thread, asking if anyone know if a harness is being marketed. But I'm afraid it isn't being made. Sorry, just came from being a Mustang owner, a million mods for every little thing

.

Unfortunately, you need the passenger sensor to get rid of the light. It's bitch to remove 30 metal rings just to get to the sensor. I don't know of any solution to fooling the passenger sensor harness.

MannyWiner · 04-28-2015, 09:16 PM

Thanks for your help guys, getting use to it now. Might miss it if I fix

.

mag_black · 04-29-2015, 12:15 PM

Your airbags won't work though. Not sure I'd sacrifice safety here.

Rusty · 04-29-2015, 10:48 PM

Quote:

Originally Posted by mag_black

Your airbags won't work though. Not sure I'd sacrifice safety here.

Wuss.

Didn't have airbags until the late 80's. I survived.

sandersd · 04-30-2015, 06:01 AM

Nissan Motorsports makes a plug in part specifically for that. I just saw it this week while looking through their website. I don't have the link here at work but I'll look for it when I get home.

MannyWiner · 04-30-2015, 12:11 PM

I'd really appreciate it Sander.

So none of my airbags will work with this warning triggered?

sandersd · 04-30-2015, 03:33 PM

NISMOwarningcancel.jpg

Nismo airbag removal harness

mag_black · 04-30-2015, 06:21 PM

You still need the passenger sensor. That is just a 4.7ohm resistor. It'll still blink until you plug in the passenger sensor and also use those resistors.

mag_black · 04-30-2015, 06:22 PM

Quote:

Originally Posted by Rusty

Wuss.

Didn't have airbags until the late 80's. I survived.

I want my passengers to survive too, lol.

FireDan50 · 04-30-2015, 09:02 PM

Quote:

Originally Posted by sandersd

Attachment 102976

Nismo airbag removal harness

OMG I can't believe I've never seen that! I need that and something to take care of the passenger sensor.

04-22-2015, 11:24 PM	#1 (permalink)
MannyWiner Base Member Join Date: Apr 2015 Location: Wilsonville, Oregon Posts: 28 Drives: 13 370Z Grey manual Rep Power: 10	Airbag Light after Racing Seats As many know, the airbag light flashes after putting in racing seats. I think the 350Z had a wiring harnness to correct the problem. I know about the DIY thread for the airbag light after racing seat install. I'm just wondering if anyone know of a part to buy the simplify the process rather than use parts from my old seats. I would like to put old seats back in when I sell my car. Any ideas?

04-23-2015, 01:39 AM	#3 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,502 Drives: 09 Nissan 370Z M6 Rep Power: 29907	Search is your friend ................... enter the following to Google "the370z.com airbag light aftermarket seats" and Google will take you here: DIY: [How-To:] Racing Seat airbag light fix Then you will see how to fix your problem ... If you wish to "Reuse" the Nissan plug, then find a wrecker and get the plugs from seats out of a wrecked car ..... or purchase plugs from Nissan (won't be cheap though) Last edited by BGTV8; 04-23-2015 at 01:42 AM.

04-29-2015, 12:15 PM	#8 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Your airbags won't work though. Not sure I'd sacrifice safety here. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

04-30-2015, 06:01 AM	#10 (permalink)
sandersd Enthusiast Member Join Date: May 2014 Location: Houston, TX, USA Posts: 280 Drives: 2014 370z Nismo Rep Power: 10	Nissan Motorsports makes a plug in part specifically for that. I just saw it this week while looking through their website. I don't have the link here at work but I'll look for it when I get home. 1LIFE likes this. __________________ 2014 370Z NISMO -- HKS Hi-Power Exhaust -- Swift Springs -- BC ER Coilovers -- SPL Suspension Components -- Nismo R-Tune Intake -- Seibon BD CF Hood

04-30-2015, 03:33 PM	#12 (permalink)
sandersd Enthusiast Member Join Date: May 2014 Location: Houston, TX, USA Posts: 280 Drives: 2014 370z Nismo Rep Power: 10	Found it NISMOwarningcancel.jpg Nismo airbag removal harness __________________ 2014 370Z NISMO -- HKS Hi-Power Exhaust -- Swift Springs -- BC ER Coilovers -- SPL Suspension Components -- Nismo R-Tune Intake -- Seibon BD CF Hood

04-23-2015, 12:15 AM	#2 (permalink)
JDM-JUNKIE Base Member Join Date: Apr 2015 Location: Colorado Posts: 140 Drives: Past:NSX, S15, G35TT Rep Power: 10	Sorry I don't have an answer for you, but I saw a little of your gray seats in another thread what make/model are they? Looked good from what little I saw

04-23-2015, 09:01 PM	#4 (permalink)
MannyWiner Base Member Join Date: Apr 2015 Location: Wilsonville, Oregon Posts: 28 Drives: 13 370Z Grey manual Rep Power: 10	Thank you. They are Status GT-X seat. I had the done in gunmetal grey and black, all suede leather. As I say in my post, I know about and have read the DIY fix thread, asking if anyone know if a harness is being marketed. But I'm afraid it isn't being made. Sorry, just came from being a Mustang owner, a million mods for every little thing .

04-24-2015, 07:21 PM	#5 (permalink)
JDM-JUNKIE Base Member Join Date: Apr 2015 Location: Colorado Posts: 140 Drives: Past:NSX, S15, G35TT Rep Power: 10	Nice! I thought they might be Status but wasn't sure if anybody else was offering gray seats like those, thanks for the info.

04-28-2015, 09:16 PM	#7 (permalink)
MannyWiner Base Member Join Date: Apr 2015 Location: Wilsonville, Oregon Posts: 28 Drives: 13 370Z Grey manual Rep Power: 10	Thanks for your help guys, getting use to it now. Might miss it if I fix .

04-30-2015, 12:11 PM	#11 (permalink)
MannyWiner Base Member Join Date: Apr 2015 Location: Wilsonville, Oregon Posts: 28 Drives: 13 370Z Grey manual Rep Power: 10	I'd really appreciate it Sander. So none of my airbags will work with this warning triggered?

04-30-2015, 06:21 PM	#13 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	You still need the passenger sensor. That is just a 4.7ohm resistor. It'll still blink until you plug in the passenger sensor and also use those resistors. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: [How-To:] Racing Seat airbag light fix	Equinox	DIY Section (Do-It-Yourself)	236	11-07-2023 01:34 PM
Aftermarket seats airbag fix	dimitarm	Exterior & Interior	3	07-15-2013 12:54 PM
after market seats: airbag sensors?	brucelidat	Nissan 370Z General Discussions	11	08-10-2012 08:58 PM
Question about Racing Seats & Airbag	sixpax	Exterior & Interior	2	06-06-2012 04:50 PM
New bucket seats but needa get rid of airbag flashing	djsekz	Exterior & Interior	5	02-05-2012 09:42 AM