Carbonsignal Custom GTR Style Display Screen

2011 Nismo#91

How easy is it to switch ODBII gauges.
Say I want:
Water Temp | Air Intake Temp | Fuel Pressure
A/F R Bank 1 | A/F R Bank 2 | Throttle Position
All on the first screen.

Also the ODBII does output Cat temps (close as we are going to get to EGT) for both cats. And it does have an intake pressure/vacuum reading too.

CarbonSignal

As stated in the GB first post, any sequence of gauges can be made as a custom order as per your specific need, but as it needs programming for firmware so there is extra charge(250$) from manufacturer.

What you can do is send us an email with whats needed in first second screen along with sensors needed we can make yours as per that.

What we are offering here is based on a what we felt will be useful, for instance FI guys will have opening and default screen with Boost, AFR, Oil and water temp along with Oil pressure, then scroll to second screen for other.

For Cat temps haven't looked into PIDs for that and maybe can add for later revision if possible

__________________