Clutch master cylinder

Originally Posted by 1slow370 Clutch does suck but it isn't impossible to due in a driveway, I did my clutch and flywheel 3 times on my back with the car

		Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain
Clutch master cylinder

4Likes

1 Post By
2 Post By
1 Post By

LinkBack

Thread Tools

Display Modes

11-13-2014, 06:00 PM

#1 (permalink)

jwick

A True Z Fanatic

Join Date: Dec 2010

Location: Houston

Posts: 14,532

Drives: '10 G37 6MT

Rep Power: 2465058

Quote:

Originally Posted by 1slow370

Clutch does suck but it isn't impossible to due in a driveway, I did my clutch and flywheel 3 times on my back with the car on stands. I can do it in a day now if i don't run into any problems. If you have a lift and a trans jack it only takes a few hours.

Edit: the master cylinder kinda sucks you have to move the abs module to get at the bolts.

It's the master i was referring to. I farmed out that entire job

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Prototype Aftermarket Clutch Master Cylinder - INSTALLED!	Alstann	Engine & Drivetrain	41	04-21-2016 11:30 PM
Possible solutions to aftermarket clutch master cylinder	Alstann	Engine & Drivetrain	32	03-26-2015 08:59 PM
Wilwood Heavy-Duty Clutch Master Cylinder	djrelic	Engine & Drivetrain	25	08-29-2014 07:59 AM
Replacing the clutch line and clutch master cylinder	djrelic	DIY Section (Do-It-Yourself)	1	05-12-2014 01:46 PM
Clutch master cylinder went out again	Zenmaster	Engine & Drivetrain	4	03-26-2013 12:54 AM

All times are GMT -5. The time now is 02:14 PM.