|
If you have changed all fittings, elbows, and the adaptor that is screwed into the tapped block, or what ever its tapped into(cant really tell) You can try using a
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
08-16-2014, 05:13 PM
|
#9 (permalink) |
|
A True Z Fanatic
 
Join Date: Mar 2013
Location: Canada
Posts: 2,130
Drives: 2016 Solid Redz
Rep Power: 247   |
If you have changed all fittings, elbows, and the adaptor that is screwed into the tapped block, or what ever its tapped into(cant really tell)
You can try using a small amount of stainless steel Teflon tape on the leaking threads? Also double check that the elbow and hose is 100% clean and clear from any obstructions that may be causing the oil to not flow 100% forcing it to find the weakest point to leak... Last edited by Luciano13; 08-16-2014 at 05:19 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Trouble fitting forgestar wheels | 2013Zsport | Nissan 370Z General Discussions | 3 | 04-23-2014 11:40 AM |
| Fitting 3 Gauges in the Center Cubby | GrooveStyle | Exterior & Interior | 13 | 08-08-2013 07:49 PM |
| Fitting 4 wheels in car | Strangler | Nissan 370Z General Discussions | 21 | 07-30-2012 04:19 PM |
| Help test fitting HKS Oil Cap! | eXo5 | North East Region | 0 | 05-13-2009 01:57 PM |
| very concerned about fitting in the 370 | g35300mm | Nissan 370Z General Discussions | 10 | 02-23-2009 08:50 PM |
16Likes
Threaded Mode
