Z1 Motorsport oil cooler install, oil warning light at start up

peter_s · 10-11-2013, 03:01 AM

Quote:

Originally Posted by Whtfairladyz

A few questions:

1) Are you sure that you pre-filled the oil cooler during the install?
2) Did you adjust the oil level after initial start up once the lines have been primed?
3) Are you certain all lines are routed as instructed? 100% certain no oil cooler lines are pinched?
4) Have you inspected the cooler; lines and sandwich plate to ensure that there are no leaks of any kind?

Just curious to see what I can do to help out with this one. This product was important to me during my time at Z1.

Thanks Dustin,

I'll try to answer as best as I can. My mechanic is having his the day off today. I'm a bit keen of finishing off this project since I have to go to Germany next week with the car.

1. I'm not 100% sure of that, what difference would that make?
2. Oil level was adjusted.
3. Lines are routed exactly as by the instructions AFAIK
4. There are no leaks.

Cheers mate, appreciate you taking the time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
S-mode warning light	Zvengeance	Nissan 370Z General Discussions	18	04-14-2024 02:56 AM
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Warning light: red car with key flashing - what does it mean?	ocfoilist	Nissan 370Z General Discussions	9	11-14-2012 04:08 PM
Well my car won't start, key reader warning is on...	kevr6	Exterior & Interior	102	03-24-2012 08:56 PM
tail light out warning light	cossie1600	Exterior & Interior	0	06-28-2011 08:15 PM