Thermostatic Sandwich Plate Question

Mitco39 · 09-27-2013, 11:04 AM

Quote:

Originally Posted by SouthArk370Z

Let me make sure I have you current setup right. You have a relocation plate on the engine (where the oil filter used to go) with two lines. One line is connected to the remote filter plate and the other line goes to the outlet of the cooler. At the remote plate, there's the line from the reloc and the other line goes to the cooler inlet.
Oil comes out of engine, into reloc plate, then on to the filter. From there the oil goes through the cooler and back to the reloc late. Did I get that right?

That sir is correct. I dont have room to stack both the thermo plate and the reloc plate on the engine, my intercooler piping runs right up against that reloc plate as it is. So the only way this can work is if I can stack it on the remote plate.

Thanks for your help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review of Mishimoto Thermostatic Oil Sandwich Plate	derraj06	Engine & Drivetrain	104	06-19-2014 07:45 AM
Mishimoto Thermostatic Sandwich Plate, Gold	flashgordon	Engine & Drivetrain	10	07-02-2013 10:31 AM
Oil Cooler Thermostatic Sandwich Plate Conversion Kit?	Nismo221	Engine & Drivetrain	5	09-07-2010 12:44 PM
Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler)	Dustin@Z1	Z1 Motorsports	0	08-06-2010 11:26 AM