05-30-2014, 01:24 PM
|
#17 (permalink)
|
|
Base Member
Join Date: Aug 2013
Location: Dallas
Posts: 98
Drives: 11 370Z AT PW
Rep Power: 12
|
Quote:
Originally Posted by 1slow370
You will also need the bearings and seals and crushwasher and all the other little pieces for installing the gears.
I wish we could just sticky "Rear-ends are precision gear assemblies and NOTHING inside them is drop in. You will need bearings, seals, lots of shims, crush washers and other stuff, as well as significant labor time at a shop that specializes in this work. You CAN do it yourself but you will probably screw it up and turn everything you just bought into expensive paperweights"
|
Thanks for the advice. Def not doing it myself and didn't want to buy a sport manual pumpkin if it isn't necessary. Sounds like you're saying that if I have the correct install kit (bearings, seals, washers, shims, etc.), the manual quaife lsd and 4.08 would fit the open diff on a base 7AT. Is that right?
|
|
|
Similar Threads
30Likes
Threaded Mode
