Greddy Oil Pan

theDreamer · 05-17-2012, 01:29 PM

I believe they made a V2 of the tray which is suppose to provide more room for oil pan spacers and bigger sways from rubbing.

wind.zero · 05-17-2012, 01:31 PM

There is plenty of clearance with the ZSpeed kit.

Felix 808 · 05-17-2012, 01:41 PM

Quote:

Originally Posted by wind.zero

There is plenty of clearance with the ZSpeed kit.

[IMG]]

Does the service access still line up with the drain?

wind.zero · 05-17-2012, 01:47 PM

^^
I am not sure about that one. I will try and pull the access panel this weekend and see.

Just removing the ZSpeed center panel is 100% quicker than removing the entire OEM plastic shield. I am SC'ed and have an oil filter relocation kit so I have to remove the center panel for oil/filter changes anyway.

Felix 808 · 05-17-2012, 01:57 PM

Appreciate it Wind. I have been looking to get this pan & the ZSpeed under pan at sometime.

I think one benifiet people forget about the oil pan upgrade being better than just a spacer is the bafles inside the pan keeping oil at the pick up tube.

Thanks again Wind

wind.zero · 05-20-2012, 03:00 PM

It looks doable but might be a tight squeeze for the filter. I never did an oil change stock. My first oil change was when my GTM kit was installed. So I have the filter relocation kit along with the oil cooler supplement.

Removing the access door give shows the GReddy drain hole and the sandwich plate, or where you oil filter would be.

Here are the pictures:

Quote:

Originally Posted by Felix 808

Appreciate it Wind. I have been looking to get this pan & the ZSpeed under pan at sometime.

I think one benifiet people forget about the oil pan upgrade being better than just a spacer is the bafles inside the pan keeping oil at the pick up tube.

Thanks again Wind

DEpointfive0 · 02-15-2013, 04:37 AM

Quote:

Originally Posted by wind.zero

^^
I am not sure about that one. I will try and pull the access panel this weekend and see.

Just removing the ZSpeed center panel is 100% quicker than removing the entire OEM plastic shield. I am SC'ed and have an oil filter relocation kit so I have to remove the center panel for oil/filter changes anyway.

Quote:

Originally Posted by Felix 808

Appreciate it Wind. I have been looking to get this pan & the ZSpeed under pan at sometime.

I think one benifiet people forget about the oil pan upgrade being better than just a spacer is the bafles inside the pan keeping oil at the pick up tube.

Thanks again Wind

At the same time, Wind.Zero has a Nismo with a middle piece!
Just something to remember

Joe@ZSpeed · 05-27-2012, 09:24 PM

Quote:

Originally Posted by theDreamer

I believe they made a V2 of the tray which is suppose to provide more room for oil pan spacers and bigger sways from rubbing.

The V2 370z Underpan has the same clearance as the Nismo pan shown above. So yes, it will work and fit.

05-17-2012, 01:29 PM	#1 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4212	I believe they made a V2 of the tray which is suppose to provide more room for oil pan spacers and bigger sways from rubbing. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

05-17-2012, 01:31 PM	#2 (permalink)
wind.zero Enthusiast Member Join Date: Apr 2011 Location: The 49th State Posts: 296 Drives: NISMOSIS Rep Power: 16	There is plenty of clearance with the ZSpeed kit. GaleForce, DEpointfive0 and Zteven like this.

05-17-2012, 01:47 PM	#4 (permalink)
wind.zero Enthusiast Member Join Date: Apr 2011 Location: The 49th State Posts: 296 Drives: NISMOSIS Rep Power: 16	^^ I am not sure about that one. I will try and pull the access panel this weekend and see. Just removing the ZSpeed center panel is 100% quicker than removing the entire OEM plastic shield. I am SC'ed and have an oil filter relocation kit so I have to remove the center panel for oil/filter changes anyway. DEpointfive0 likes this.

05-17-2012, 01:57 PM	#5 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2808	Appreciate it Wind. I have been looking to get this pan & the ZSpeed under pan at sometime. I think one benifiet people forget about the oil pan upgrade being better than just a spacer is the bafles inside the pan keeping oil at the pick up tube. Thanks again Wind __________________ Semper Fi Μολὼν λαβέ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greddy Turbo TI-C or Greddy Spectrum Elite?	Andy124	Intake/Exhaust	32	06-05-2011 02:34 PM
Greddy ti-c vs. Greddy se for (na's)	NizzyBoy	Intake/Exhaust	3	09-22-2010 12:16 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 05:57 AM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Drivetrain/Engine	0	07-16-2010 07:26 PM
Greddy TT	Zsteve	Forced Induction	29	04-13-2010 10:09 PM