Greddy Oil Pan

VSS370z · 04-27-2012, 10:21 PM

I was looking on the GTM website and they have the Greddy High Capacity aluminum oil pan, is it a good upgrade? I ask because it seems that a lot of people here use oil pan spacers instead and yes i am planning to go force induction soon. Thanks for the help guys!

SPOHN · 04-28-2012, 08:28 AM

It's a great upgrade IMO. BUt if you plan to go FI I'd just wait till then to get it.

seymore4 · 04-28-2012, 11:55 AM

I would get an oil cooler instead, but it wouldn't hurt

Baer383 · 04-28-2012, 12:03 PM

I would get both they work well together.

fuct · 04-28-2012, 12:04 PM

I would love the extra quart of oil that it adds. it wont make a huge difference with cooling but having the extra oil is never a bad thing. dont porche's run 6/7 quarts of oil?

Baer383 · 04-28-2012, 12:12 PM

Quote:

Originally Posted by fuct

I would love the extra quart of oil that it adds. it wont make a huge difference with cooling but having the extra oil is never a bad thing. dont porche's run 6/7 quarts of oil?

It does make a big difference that quart extra helps dissipate heat my temps so far have not gone over 205deg.

Neo187H · 04-28-2012, 12:25 PM

Quote:

Originally Posted by Baer383

It does make a big difference that quart extra helps dissipate heat my temps so far have not gone over 205deg.

With no oil cooler? What ambient air temps?

Baer383 · 04-28-2012, 12:34 PM

Quote:

Originally Posted by Neo187H

With no oil cooler? What ambient air temps?

I have a 25 row oil cooler,as far as air temps go ,I'm F.I so it wouldn't be the same.

Neo187H · 04-28-2012, 02:00 PM

Quote:

Originally Posted by Baer383

I have a 25 row oil cooler,as far as air temps go ,I'm F.I so it wouldn't be the same.

Ah I thought you meant your oil temps were so low just from the oil pan, got me excited for a minute. Though ambient temp always matters as far as cool goes, the issue is just compounded when you add FI to the mix.

fuct · 04-28-2012, 02:09 PM

Quote:

Originally Posted by Neo187H

Ah I thought you meant your oil temps were so low just from the oil pan, got me excited for a minute. Though ambient temp always matters as far as cool goes, the issue is just compounded when you add FI to the mix.

yea no kidding. i was talking about adding it WITHOUT an oil cooler.

Baer383 · 04-28-2012, 02:15 PM

Quote:

Originally Posted by fuct

yea no kidding. i was talking about adding it WITHOUT an oil cooler.

You have to have a oil cooler at the very least to control oil temps,it should have been a red flag that Nissan put a oil "temp" gauge,

The reason why the oil temps are high is b/c the oil pan is very shallow so that most of the oil sits up inside the engine block with it being fed heat at a constant basis.

VSS370z · 04-28-2012, 08:10 PM

Thanks a lot guys for the info, just wanted to ask since i decided i want to start buying a few of the supporting mods first that are necessary or at least recommended for FI

ZBro16 · 05-17-2012, 12:19 PM

Anyone have this Greddy pan with the ZSpeed undershroud with the oil change access door? I'm guessing this won't fit with that on... but then again if the Greddy pan is made to fit underneath the stock undershould then it should fit. Thoughts?

Baer383 · 05-17-2012, 01:26 PM

Quote:

Originally Posted by ZBro16

Anyone have this Greddy pan with the ZSpeed undershroud with the oil change access door? I'm guessing this won't fit with that on... but then again if the Greddy pan is made to fit underneath the stock undershould then it should fit. Thoughts?

I have the Greddy pan and it fits with a stock splash shield,but it is close I was going to buy the Z speed under shroud but it is to close I thought it might rub so I didn't buy it.

theDreamer · 05-17-2012, 01:29 PM

I believe they made a V2 of the tray which is suppose to provide more room for oil pan spacers and bigger sways from rubbing.

04-27-2012, 10:21 PM	#1 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 13	Greddy Oil Pan I was looking on the GTM website and they have the Greddy High Capacity aluminum oil pan, is it a good upgrade? I ask because it seems that a lot of people here use oil pan spacers instead and yes i am planning to go force induction soon. Thanks for the help guys!

04-28-2012, 08:28 AM	#2 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	It's a great upgrade IMO. BUt if you plan to go FI I'd just wait till then to get it. __________________

04-28-2012, 12:03 PM	#4 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	I would get both they work well together. __________________ 2013 ZL1 754 rwhp 747 rwtq

05-17-2012, 01:29 PM	#15 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I believe they made a V2 of the tray which is suppose to provide more room for oil pan spacers and bigger sways from rubbing. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greddy Turbo TI-C or Greddy Spectrum Elite?	Andy124	Intake/Exhaust	32	06-05-2011 02:34 PM
Greddy ti-c vs. Greddy se for (na's)	NizzyBoy	Intake/Exhaust	3	09-22-2010 12:16 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 05:57 AM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Drivetrain/Engine	0	07-16-2010 07:26 PM
Greddy TT	Zsteve	Forced Induction	29	04-13-2010 10:09 PM

04-28-2012, 11:55 AM	#3 (permalink)
seymore4 Track Member Join Date: Nov 2010 Location: West coast Age: 41 Posts: 555 Drives: 2010 nismo Rep Power: 6726	I would get an oil cooler instead, but it wouldn't hurt

04-28-2012, 12:04 PM	#5 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	I would love the extra quart of oil that it adds. it wont make a huge difference with cooling but having the extra oil is never a bad thing. dont porche's run 6/7 quarts of oil?

04-28-2012, 08:10 PM	#12 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 13	Thanks a lot guys for the info, just wanted to ask since i decided i want to start buying a few of the supporting mods first that are necessary or at least recommended for FI

05-17-2012, 12:19 PM	#13 (permalink)
ZBro16 Enthusiast Member Join Date: Nov 2011 Location: Huntsville, AL Posts: 370 Drives: A Z. Rep Power: 13	Anyone have this Greddy pan with the ZSpeed undershroud with the oil change access door? I'm guessing this won't fit with that on... but then again if the Greddy pan is made to fit underneath the stock undershould then it should fit. Thoughts?