JUN exhaust cam shaft finally arrived

DarkJak · 10-17-2012, 09:51 PM

Of course it WOULD work that way, but hopefully his results will be good, and this may convince people in the US to get it.

Navyboy916 · 10-18-2012, 01:04 AM

I hope this will convince someone in the states to buy these cams and get them dynoed.

GarageLine.com · 10-18-2012, 09:01 AM

Quote:

Originally Posted by Navyboy916

I hope this will convince someone in the states to buy these cams and get them dynoed.

I have a set on the way to to me. It probably will be late November by the time I get them though. But we will have dyno numbers soon.

370Z Purist · 10-18-2012, 02:10 PM

Quote:

Originally Posted by garageline.com

i have a set on the way to to me. It probably will be late november by the time i get them though. But we will have dyno numbers soon.

yes.

edub370 · 10-18-2012, 02:28 PM

Quote:

Originally Posted by GarageLine.com

I have a set on the way to to me. It probably will be late November by the time I get them though. But we will have dyno numbers soon.

Thank GOD!!!!!!!!!

Z eliminator · 10-18-2012, 02:45 PM

The Z has a set of june cams.
not sure what moter to put them in,
good bet that GTM will install them in my built moter.
not till middle of winter
20 thou over bore 10.1 comp, all the best parts. with GTM stage 3 SC.
15 lbs boost ?

The Dimer · 10-18-2012, 05:07 PM

Quote:

Originally Posted by Z eliminator

The Z has a set of june cams.
not sure what moter to put them in,
good bet that GTM will install them in my built moter.
not till middle of winter
20 thou over bore 10.1 comp, all the best parts. with GTM stage 3 SC.
15 lbs boost ?

Stage 3, you say?

JC671 · 10-18-2012, 06:28 PM

Quote:

Originally Posted by Navyboy916

Ok so here the update. Friday I will be going to take pics of the engine when it's open. I had to wait for some seal to come in cause the dealership had none for when they put the engine covers back on. They just came in. The can install will be finished by beginning of next week. The Nissan manual calls for two to three full days but here on Guam I have to plan for longer. That's just the island life here lol. I am getting other things done to the car as well at the same time. Sorry for the long delay. That's what happens when u live on an island in the middle of
bum **** nowhere lol. Hope u guys are still interested.

So is the car really in there now? Just saying last time you said you dropped off your car already and they were working on it. Then you said you didn't drop it cause Nissan had no rental cars (hard to believe). Then you said you wouldn't take it to Nissan cause this and that. Alot is not adding up. Nissan is 5 mins from my house. If I go over right now is your car there?

Quote:

Originally Posted by Jordo!

Wow -- good luck!

Do you have a baseline to compare it to?

Thats what I would like to know too. He told me on text he did.

Quote:

Originally Posted by Navyboy916

Unfortunately we don't have a dyno here on Guam. I don't have actual numbers but I will show video to help people decide if they want to get the cams. Sorry that's the best I can do.

Oh so you don't have actual numbers or ever dynoed your car?
Please explain your comment in this video where you claimed 334whp and 276 trq.
370z in Guam with mods - YouTube

Keep in mind folks this comment was made over 9 months ago.

I've never seen someone reach those numbers without LTH, pulleys and you claimed you made this with just the Ark CBE, stillen headers shorty header and berk CBE only.

Dude there has been a myriad of things you have told me on text that make me say "Oh really!?!?!" I can take screen shots and post them if you like, if you come on here and try to discredit this.

Just be real dude. IDK if you thought that you was talking to someone who this is their first car but this car is not my first rodeo. I caught on and just left you alone. But please stop telling lies on this forum and on youtube.

Navyboy916 · 10-18-2012, 10:32 PM

I am not here to fight or argue with anyone. But go look my car is at Nissan. Save the **** talking this is not the place for it. You have a problem then talk to me not on this forum.

Navyboy916 · 10-19-2012, 03:22 AM

Here are some pics of the car I took today at the dealership. Showing progress.

red6spd · 10-19-2012, 08:48 AM

nice

Navyboy916 · 10-22-2012, 02:54 AM

Here are some more pics I took today and the progress. I just took them my new trans cooler and the Hks spark plugs. My nst pulley set will be here hopefully this week to. Tomorrow the timing chain is coming off and I will take pics of that.

indyn · 10-22-2012, 10:19 AM

The VVEL assembly has to come off to get to the exhaust cams. It is taking a bit too long, nevertheless have to give props to the dealership in Guam for doing this.

Kingbaby · 10-22-2012, 02:58 PM

^^^

+1

Navyboy916 · 10-22-2012, 03:09 PM

It's going to take a little while l am not trying to rush them cause I want it done right. They know the steps that have to be taken. I expect another 2 weeks that what I am saying but maybe hey might have it done sooner not sure.

10-18-2012, 02:45 PM	#6 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	The Z has a set of june cams. not sure what moter to put them in, good bet that GTM will install them in my built moter. not till middle of winter 20 thou over bore 10.1 comp, all the best parts. with GTM stage 3 SC. 15 lbs boost ? __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

10-19-2012, 08:48 AM	#11 (permalink)
red6spd A True Z Fanatic Join Date: Apr 2010 Location: Long Island NY Posts: 3,277 Drives: 2010 Z Coupe M6 SPT Rep Power: 22	nice __________________ 2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness. ???Whp ???WTQ (Will find out come spring time)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Top Secret intake finally arrived	zuperman 370	Intake/Exhaust	43	06-11-2012 12:31 PM
finally amuse stti extra exhaust arrived + lots of pics	zuperman 370	Intake/Exhaust	22	03-16-2011 12:25 AM
Finally Arrived	gregp	Member's 370Z Gallery	7	08-25-2010 09:30 PM
The day finally arrived!!!	TooFaded	New 370Z Owner	9	08-09-2010 07:29 AM
Jekels Z finally arrived!	jekel	Member's 370Z Gallery	15	08-24-2009 06:32 AM

10-17-2012, 09:51 PM	#1 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16805	Of course it WOULD work that way, but hopefully his results will be good, and this may convince people in the US to get it.

10-18-2012, 01:04 AM	#2 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	I hope this will convince someone in the states to buy these cams and get them dynoed.

10-18-2012, 10:32 PM	#9 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	I am not here to fight or argue with anyone. But go look my car is at Nissan. Save the **** talking this is not the place for it. You have a problem then talk to me not on this forum.

10-22-2012, 10:19 AM	#13 (permalink)
indyn Base Member Join Date: Apr 2011 Location: farr north Posts: 241 Drives: 11 BMW 335i 6AT Rep Power: 15	The VVEL assembly has to come off to get to the exhaust cams. It is taking a bit too long, nevertheless have to give props to the dealership in Guam for doing this.

10-22-2012, 03:09 PM	#15 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	It's going to take a little while l am not trying to rush them cause I want it done right. They know the steps that have to be taken. I expect another 2 weeks that what I am saying but maybe hey might have it done sooner not sure.