KillerBee370's journal

KillerBee370 · 04-24-2009, 02:35 PM

Quote:

Originally Posted by semtex

Any chance you can do a dyno on a DynoDynamics or DynoJet so that we know for sure how SuperFlow compares? Not trying to be a killjoy here, but I've been doing some research on this via Google, and most hits say that Superflow numbers come in even higher than DynoJet by about 10-12%. But I've also seen the odd hit here and there that says it's the other way around. So it's definitely not conclusive. Again, not trying to take the wind out of your sails or anything. I just have no idea what to think of your numbers right now (and by extension judge the effectiveness of the TechnoSquare tune), because they aren't meaningful to me until I can get a clear idea of how Superflow stacks up relative to other dynos. (That's why I've been doing dynos on both DynoDynamics and DynoJet - so we could see how those two stack up against each other.)

I absolutely agree with you. It seems that dynos are all over the road when it comes to the numbers. I believe the numbers that I was shown had my car at 326 on the DynoJet MODE of the Superflow dyno. The actual number of the Superflowas around 312. Now an actual DynoJet dyno may read something completely different. I was told that the numbers between the Superflow & the DynoDynamics were very close. I have no idea if that's true or not or what the variance is between each of them in their respective "DynoJet" modes.

I do have access to a DynoDynamics and will dyno there as well for comparison.

I guess in the end, numbers don't amount to a hill of beans!!! Haha

semtex · 04-24-2009, 03:46 PM

Quote:

Originally Posted by KillerBee370

I absolutely agree with you. It seems that dynos are all over the road when it comes to the numbers. I believe the numbers that I was shown had my car at 326 on the DynoJet MODE of the Superflow dyno. The actual number of the Superflowas around 312. Now an actual DynoJet dyno may read something completely different. I was told that the numbers between the Superflow & the DynoDynamics were very close. I have no idea if that's true or not or what the variance is between each of them in their respective "DynoJet" modes.

I do have access to a DynoDynamics and will dyno there as well for comparison.

I guess in the end, numbers don't amount to a hill of beans!!! Haha

Actually, that makes a lot of sense if the 326 was on DynoJet mode. Thanks for the clarification. Yeah, dynos are more art than science, I sometimes think. Definitely gotta take the numbers with a grain of salt. I am SO looking forward to getting a tune.

M.Bonanni · 04-23-2009, 03:09 PM

Nice Evo!

<--Getting ready to sell his IX.

KillerBee370 · 04-23-2009, 06:39 PM

Just got my car back and the sound of the HFC's and exhaust had me with a big stupid grin all the way home.

NA&CH · 04-23-2009, 07:34 PM

What are the final numbers with the intakes etc? 326 with HFC and CBE is pretty awesome. I would be more then happy with that

Thanks for letting yor car be a guinepig

Chris

KillerBee370 · 04-23-2009, 09:25 PM

Quote:

Originally Posted by NA&CH

What are the final numbers with the intakes etc? 326 with HFC and CBE is pretty awesome. I would be more then happy with that

Thanks for letting yor car be a guinepig

Chris

That's the final number with tune and bolt-ons. And the sound is out of this world... videos coming soon!

NA&CH · 04-23-2009, 10:04 PM

Thanks. Can't wait to see the vids

Chris

KillerBee370 · 04-23-2009, 10:45 PM

Quote:

Originally Posted by NA&CH

Thanks. Can't wait to see the vids

Chris

Working on some all day tomorrow!

semtex · 04-24-2009, 08:18 AM

Did I miss something? Where do you see 326? Do you have a dyno showing 326?

KillerBee370 · 04-24-2009, 09:58 AM

Quote:

Originally Posted by semtex

Did I miss something? Where do you see 326? Do you have a dyno showing 326?

Technosquare has it. I haven't gotten the graph that shows bars with each bolt-on and what they produced along with tune. Sorry for the confusion. As soon as I get it, I will post it up!

shabarivas · 04-24-2009, 12:33 PM

+1 man... awesome

Skorch · 04-24-2009, 12:40 PM

326 with just a catback and high flow cats?! That's amazing! I can't wait to see what sort of gains I get with my intakes as well.

shabarivas · 04-24-2009, 03:54 PM

put them wheels on already!!

NA&CH · 04-24-2009, 04:36 PM

Quote:

Originally Posted by shabarivas

put them wheels on already!!

+ a whole bunch

Chris

semtex · 04-24-2009, 04:52 PM

Quote:

Originally Posted by shabarivas

put them wheels on already!!

Quote:

Originally Posted by NA&CH

+ a whole bunch

Chris

He did. He has pics in this thread here: UPS rang my doorbell today... :)

04-23-2009, 03:09 PM	#3 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	Nice Evo! <--Getting ready to sell his IX. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

04-24-2009, 08:18 AM	#9 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 33	Did I miss something? Where do you see 326? Do you have a dyno showing 326? __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

04-24-2009, 12:40 PM	#12 (permalink)
Skorch Enthusiast Member Join Date: Feb 2009 Location: Phoenix, AZ Posts: 469 Drives: 2012 370Z Rep Power: 541	326 with just a catback and high flow cats?! That's amazing! I can't wait to see what sort of gains I get with my intakes as well. __________________ '12 370Z + Sport \| Stillen Gen3 Intakes \| Stillen UD Pulley \| Motordyne M370 \| FI Exhaust \| FI HFCs \| 4.08 Gears \| Uprev tuned

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wstar's Journal	wstar	Member's 370Z Gallery	865	12-28-2019 09:15 AM
TravisJB Journal	travisjb	Member's 370Z Gallery	1977	11-03-2017 09:39 AM
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
LiquidZ's Journal	LiquidZ	Member's 370Z Gallery	22	05-22-2009 11:42 PM

04-23-2009, 06:39 PM	#4 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 52 Posts: 5,964 Drives: with passion Rep Power: 322	Just got my car back and the sound of the HFC's and exhaust had me with a big stupid grin all the way home.

04-23-2009, 07:34 PM	#5 (permalink)
NA&CH Enthusiast Member Join Date: Dec 2008 Location: Nipples Florida Posts: 298 Drives: Looking for PW 370 Rep Power: 291	What are the final numbers with the intakes etc? 326 with HFC and CBE is pretty awesome. I would be more then happy with that Thanks for letting yor car be a guinepig Chris

04-23-2009, 10:04 PM	#7 (permalink)
NA&CH Enthusiast Member Join Date: Dec 2008 Location: Nipples Florida Posts: 298 Drives: Looking for PW 370 Rep Power: 291	Thanks. Can't wait to see the vids Chris

04-24-2009, 12:33 PM	#11 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 915	+1 man... awesome

04-24-2009, 03:54 PM	#13 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 915	put them wheels on already!!